Full Width [alt+shift+f] Shortcuts [alt+shift+k]
Sign Up [alt+shift+s] Log In [alt+shift+l]
97
Quote quiz: who said this? (No fair looking it up). I have modified the original quotation slightly, by making a handful of word substitutions to bring it up to date: It might be argued that the human race would never be foolish enough to hand over all power to AI. But we are suggesting neither that the human race would voluntarily turn power over to AI nor that AI would willfully seize power. What we do suggest is that the human race might easily permit itself to drift into a position of such dependence on AI that it would have no practical choice but to accept all of the AI’s decisions. As society and the problems that face it become more and more complex and as AI becomes more and more intelligent, people will let AI make more and more of their decisions for them, simply because AI-made decisions will bring better results than man-made ones. Eventually a stage may be reached at which the decisions necessary to keep the system running will be so complex that human beings will be incapable of making them intelligently. At that stage the AI will be in effective control. People won’t be able to just turn the AI off, because they will be so dependent on it that turning it off would amount to suicide. I’ll post the answer, and the unedited original quotation, next week.
27th Apr 2023

Stay updated

Get a weekly newsletter with the top 5 articles worth reading every week.

More from The Roots of Progress | Articles

What is progress?

In one sense, the concept of progress is simple, straightforward, and uncontroversial. In another sense, it contains an entire worldview. The most basic meaning of “progress” is simply advancement along a path, or more generally from one state to another that is considered more advanced by some standard. (In this sense, progress can be good, neutral, or even bad—e.g., the progress of a disease.) The question is always: advancement along what path, in what direction, by what standard? Types of progress “Scientific progress,” “technological progress,” and “economic progress” are relatively straightforward. They are hard to measure, they are multi-dimensional, and we might argue about specific examples—but in general, scientific progress consists of more knowledge, better theories and explanations, a deeper understanding of the universe; technological progress consists of more inventions that work better (more powerfully or reliably or efficiently) and enable us to do more things; economic progress consists of more production, infrastructure, and wealth. Together, we can call these “material progress”: improvements in our ability to comprehend and to command the material world. Combined with more intangible advances in the level of social organization—institutions, corporations, bureaucracy—these constitute “progress in capabilities”: that is, our ability to do whatever it is we decide on. True progress But this form of progress is not an end in itself. True progress is advancement toward the good, toward ultimate values—call this “ultimate progress,” or “progress in outcomes.” Defining this depends on axiology; that is, on our theory of value. To a humanist, ultimate progress means progress in human well-being: “human progress.” Not everyone agrees on what constitutes well-being, but it certainly includes health, happiness, and life satisfaction. In my opinion, human well-being is not purely material, and not purely hedonic: it also includes “spiritual” values such as knowledge, beauty, love, adventure, and purpose. The humanist also sees other kinds of progress contributing to human well-being: “moral progress,” such as the decline of violence, the elimination of slavery, and the spread of equal rights for all races and sexes; and more broadly “social progress,” such as the evolution from monarchy to representative democracy, or the spread of education and especially literacy. Others have different standards. Biologist David Graber called himself a “biocentrist,” by which he meant … those of us who value wildness for its own sake, not for what value it confers upon mankind. … We are not interested in the utility of a particular species, or free-flowing river, or ecosystem, to mankind. They have intrinsic value, more value—to me—than another human body, or a billion of them. … Human happiness, and certainly human fecundity, are not as important as a wild and healthy planet. By this standard, virtually all human activity is antithetical to progress: Graber called humans “a cancer… a plague upon ourselves and upon the Earth.” Or for another example, one Lutheran stated that his “primary measure of the goodness of a society is the population share which is a baptized Christian and regularly attending church.” The idea of progress isn’t completely incompatible with some flavors of environmentalism or of religion (and there are both Christians and environmentalists in the progress movement!) but these examples show that it is possible to focus on a non-human standard, such as God or Nature, to the point where human health and happiness become irrelevant or even diametrically opposed to “progress.” Unqualified progress What are we talking about when we refer to “progress” unqualified, as in “the progress of mankind” or “the roots of progress”? “Progress” in this sense is the concept of material progress, social progress, and human progress as a unified whole. It is based on the premise that progress in capabilities really does on the whole lead to progress in outcomes. This doesn’t mean that all aspects of progress move in lockstep—they don’t. It means that all aspects of progress support each other and over the long term depend on each other; they are intertwined and ultimately inseparable. Consider, for instance, how Patrick Collison and Tyler Cowen defined the term in their article calling for “progress studies”: By “progress,” we mean the combination of economic, technological, scientific, cultural, and organizational advancement that has transformed our lives and raised standards of living over the past couple of centuries. David Deutsch, in The Beginning of Infinity, is even more explicit, saying that progress includes “improvements not only in scientific understanding, but also in technology, political institutions, moral values, art, and every aspect of human welfare.” Skepticism of this idea of progress is sometimes expressed as: “progress towards what?” The undertone of this question is: “in your focus on material progress, you have lost sight of social and/or human progress.” On the premise that different forms of progress are diverging and even coming into opposition, this is an urgent challenge; on the premise that progress a unified whole, it is a valuable intellectual question but not a major dilemma. Historical progress “Progress” is also an interpretation of history according to which all these forms of progress have, by and large, been happening. In this sense, the study of “progress” is the intersection of axiology and history: given a standard of value, are things getting better? In Steven Pinker’s book Enlightenment Now: The Case for Reason, Science, Humanism, and Progress, the bulk of the chapters are devoted to documenting this history. Many of the charts in that book were sourced from Our World in Data, which also emphasizes the historical reality of progress. So-called “progress” Not everyone agrees with this concept of progress. It depends on an Enlightement worldview that includes confidence in reason and science, and a humanist morality. One argument against the idea of progress claims that material progress has not actually led to human well-being. Perhaps the benefits of progress are outweighed by the costs and risks: health hazards, technological unemployment, environmental damage, existential threats, etc. Some downplay or deny the benefits themselves, arguing that material progress doesn’t increase happiness (owing to the hedonic treadmill), that it doesn’t satisfy our spiritual values, or that it degrades our moral character. Rousseau famously asserted that “the progress of the sciences and the arts has added nothing to our true happiness” and that “our souls have become corrupted to the extent that our sciences and our arts have advanced towards perfection.” Others, as mentioned above, argue for a different standard of value altogether, such as nature or God. (Often these arguments contain some equivocation between whether these things are good in themselves, or whether we should value them because they are good for human well-being over the long term.) When people start to conclude that progress is not in fact good, they talk about this as no longer “believing in progress.” Historian Carl Becker, writing in the shadow of World War I, said that “the fact of progress is disputed and the doctrine discredited,” and asked: “May we still, in whatever different fashion, believe in the progress of mankind?” In 1991, Christopher Lasch asked: How does it happen that serious people continue to believe in progress, in the face of massive evidence that might have been expected to refute the idea of progress once and for all? Those who dispute the idea of progress often avoid the term, or quarantine it in scare quotes: so-called “progress.” When Jeremy Caradonna questioned the concept in The Atlantic, the headline was: “Is ‘Progress’ Good for Humanity?” One of the first court rulings on environmental protection law, in 1971, said that such law represented “the commitment of the Government to control, at long last, the destructive engine of material ‘progress.’” Or consider this from Guns, Germs, and Steel: … I do not assume that industrialized states are “better” than hunter-gatherer tribes, or that the abandonment of the hunter-gatherer lifestyle for iron-based statehood represents “progress,” or that it has led to an increase in human happiness. The idea of progress is inherently an idea that progress, overall, is good. If “progress” is destructive, if it does not in fact improve human well-being, then it hardly deserves the name. Contrast this with the concept of growth. “Growth,” writ large, refers to an increase in the population, the economy, and the scale of human organization and activity. It is not inherently good: everyone agrees that it is happening, but some are against it; some even define themselves by being against it (the “degrowth” movement). No one is against progress, they are only against “progress”: that is, they either believe in it, or deny it. The most important question in the philosophy of progress, then, is whether the idea of progress is valid—whether “progress” is real. “Progress” in the 19th century Before the World Wars, there was an idea of progress that went even beyond what I have defined above, and which contained at least two major errors. One error was the idea that progress is inevitable. Becker, in the essay quoted above, said that according to “the doctrine of progress,” the Idea or the Dialectic or Natural Law, functioning through the conscious purposes or the unconscious activities of men, could be counted on to safeguard mankind against future hazards. … At the present moment the world seems indeed out of joint, and it is difficult to believe with any conviction that a power not ourselves … will ever set it right. (Emphasis added.) The other was the idea that moral progress was so closely connected to material progress that they would always move together. Condorcet believed that prosperity would “naturally dispose men to humanity, to benevolence and to justice,” and that “nature has connected, by a chain which cannot be broken, truth, happiness, and virtue.” The 20th century, with the outbreak of world war and the rise of totalitarianism, proved these ideas disastrously wrong. “Progress” in the 21st century and beyond To move forward, we need a wiser, more mature idea of progress. Progress is not automatic or inevitable. It depends on choice and effort. It is up to us. Progress is not automatically good. It must be steered. Progress always creates new problems, and they don’t get solved automatically. Solving them requires active focus and effort, and this is a part of progress, too. Material progress does not automatically lead to moral progress. Technology within an evil social system can do more harm than good. We must commit to improving morality and society along with science, technology, and industry. With these lessons well learned, we can rescue the idea of progress and carry it forward into the 21st century and beyond.

9th Mar 2024 156 votes
Event, Feb 29: “Towards a New Philosophy of Progress” in Boston and on Zoom

On Thursday, February 29, I’ll be giving my talk “Towards a New Philosophy of Progress” to the New England Legal Foundation, for their Economic Liberty Speaker Series. The talk will be held over breakfast at NELF’s offices in Boston, and will also be livestreamed over Zoom. See details and register here. This is a talk I have given before in other venues. The description: Enlightenment thinkers were tremendously optimistic about the potential for human progress: not only in science and technology, but also in morality and society. This belief lasted through the 19th century—but in the 20th century, after the World Wars, it gave way to fear, skepticism, and distrust. Now, in the 21st century, we need a new way forward: a new philosophy of progress. What events and ideas challenged the concept of progress? How can we restore it on a sound foundation? And how can we establish a bold, ambitious vision for the future?

21st Feb 2024 109 votes
Cellular reprogramming, pneumatic launch systems, and terraforming Mars

In December, I went to the Foresight Institute’s Vision Weekend 2023 in San Francisco. I had a lot of fun talking to a bunch of weird and ambitious geeks about the glorious abundant technological future. Here are few things I learned about (with the caveat that this is mostly based on informal conversations with only basic fact-checking, not deep research): Cellular reprogramming Aging doesn’t only happen to your body: it happens at the level of individual cells. Over time, cells accumulate waste products and undergo epigenetic changes that are markers of aging. But wait—when a baby is born, it has young cells, even though it grew out of cells that were originally from its older parents. That is, the egg and sperm cells might be 20, 30, or 40 years old, but somehow when they turn into a baby, they get reset to biological age zero. This process is called “reprogramming,” and it happens soon after fertilization. It turns out that cell reprogramming can be induced by certain proteins, known as the Yamanaka factors, after their discoverer (who won a Nobel for this in 2012). Could we use those proteins to reprogram our own cells, making them youthful again? Maybe. There is a catch: the Yamanaka factors not only clear waste out of cells, they also reset them to become stem cells. You do not want to turn every cell in your body into a stem cell. You don’t even want to turn a small number of them into stem cells: it can give you cancer (which kind of defeats the purpose of a longevity technology). But there is good news: when you expose cells to the Yamanaka factors, the waste cleanup happens first, and the stem cell transformation happens later. If we can carefully time the exposure, maybe we can get the target effect without the damaging side effects. This is tricky: different tissues respond on different timelines, so you can’t apply the treatment uniformly over the body. There are a lot of details to be worked out here. But it’s an intriguing line of research for longevity, and it’s one of the avenues being explored at Retro Bio, among other places. Here’s a Derek Lowe article with more info and references. The BFG orbital launch system If we’re ever going to have a space economy, it has to be a lot cheaper to launch things into space. Space Shuttle launches cost over $65,000/kg, and even the Falcon Heavy costs $1500/kg. Compare to shipping costs on Earth, which are only a few dollars per kilogram. A big part of the high launch cost in traditional systems is the rocket, which is discarded with each launch. SpaceX is bringing costs down by making reusable rockets that land gently rather than crashing into the ocean, and by making very big rockets for economies of scale (Elon Musk has speculated that Starship could bring costs as low as $10/kg, although this is a ways off, since right now fuel costs alone are close to that amount). But what if we didn’t need a rocket at all? Rockets are pretty much our only option for propulsion in space, but what if we could give most of the impulse to the payload on Earth? J. Storrs Hall has proposed the “space pier,” a runway 300 km long mounted atop towers 100 km tall. The payload takes an elevator 100 km up to the top of the tower, thus exiting the atmosphere and much of Earth’s gravity well. Then a linear induction motor accelerates it into orbit along the 300 km track. You could do this with a mere 10 Gs of acceleration, which is survivable by human passengers. Think of it like a Big Friendly Giant (BFG) picking up your payload and then throwing it into orbit. Hall estimates that this could bring launch costs down to $10/kg, if the pier could be built for a mere $10 billion. The only tiny little catch with the space pier is that there is no technology in existence that could build it, and no construction material that a 100 km tower could be made of. Hall suggests that with “mature nanotechnology” we could build the towers out of diamond. OK. So, probably not going to happen this decade. What can we do now, with today’s technology? Let’s drop the idea of using this for human passengers and just consider relatively durable freight. Now we can use much higher G-forces, which means we don’t need anything close to 300 km of distance to accelerate over. And, does it really have to be 100 km tall? Yes, it’s nice to start with an altitude advantage, and with no atmosphere, but both of those problems can be overcome with sufficient initial velocity. At this point we’re basically just talking about an enormous cannon (a very different kind of BFG). This is what Longshot Space is doing. Build a big long tube in the desert. Put the payload in it, seal the end with a thin membrane, and pump the air out to create a vacuum. Then rapidly release some compressed gasses behind the payload, which bursts through the membrane and exits the tube at Mach 25. One challenge with this is that a gas can only expand as fast as the speed of sound in that gas. In air this is, of course, a lot less than Mach 25. One thing that helps is to use a lighter gas, in which the speed of sound is higher, such as helium or (for the very brave) hydrogen. Another part of the solution is to give the payload a long, wedge-shaped tail. The expanding gasses push sideways on this tail, which through the magic of simple machines translates into a much faster push forwards. There’s a brief discussion and illustration of the pneumatics in this video. Now, if you are trying to envision “big long tube in the desert”, you might be wondering: is the tube angled upwards or something? No. It is basically lying flat on the ground. It is expensive to build a long straight thing that points up: you have to dig a deep hole and/or build a tall tower. What about putting it on the side of a mountain, which naturally points up? Building things on mountains is also hard; in addition, mountains are special and nobody wants to give you one. It’s much easier to haul lots of materials into the middle of the desert; also there is lots of room out there and the real estate is cheap. Next you might be wondering: if the tube is horizontal, isn’t it pointed in the wrong direction to get to space? I thought space was up? Well, yes. There are a few things going on here. One is that if you travel far enough in a straight line, the Earth will curve away from you and you will eventually find yourself in space. Another is that if you shape the projectile such that its center of pressure is in the right place relative to its center of mass, then it will naturally angle upward when it hits the atmosphere. Lastly, if you are trying to get into orbit, most of the velocity you need is actually horizontal anyway. In fact, if and when you reach a circular orbit, you will find that all of your velocity is horizontal. This means that there is no way to get into orbit purely ballistically, with a single impulse imparted from Earth. Any satellite, for instance, launched via this system will need its own rocket propulsion in order to circularize the orbit once it reaches altitude (even leaving aside continual orbital adjustments during its service lifetime). But we’re now talking about a relatively small rocket with a small amount of fuel, not the big multi-stage things that you need to blast off from the surface. And presumably someday we will be delivering food, fuel, tools, etc. to space in packages that just need to be caught by whoever is receiving them. Longshot estimates that this system, like Starship or the space pier, could get launch costs down to about $10/kg. This might be cheap enough that launch prices could be zero, subsidized by contracts to buy fuel or maintenance, in a space-age version of “give away the razor and sell the blades.” Not only would this business model help grow the space economy, it would also prove wrong all the economists who have been telling us for decades that “there’s no such thing as a free launch.” Mars could be terraformed in our lifetimes Terraforming a planet sounds like a geological process, and so I had sort of thought that it would require geological timescales, or if it could really be accelerated, at least a matter of centuries or so. You drop off some algae or something on a rocky planet, and then your distant descendants return one day to find a verdant paradise. So I was surprised to learn that major changes on Mars could, in principle, be made on a schedule much shorter than a single human lifespan. Let’s back up. Mars is a real fixer-upper of a planet. Its temperature varies widely, averaging about −60º C; its atmosphere is thin and mostly carbon dioxide. This severely depresses its real estate values. Suppose we wanted to start by significantly warming the planet. How do you do that? Let’s assume Mars’s orbit cannot be changed—I mean, we’re going to get in enough trouble with the Sierra Club as it is—so the total flux of solar energy reaching the planet is constant. What we can do is to trap a bit more of that energy on the planet, and prevent it from radiating out into space. In other words, we need to enhance Mars’s greenhouse effect. And the way to do that is to give it a greenhouse gas. Wait, we just said that Mars’s atmosphere is mostly CO2, which is a notorious greenhouse gas, so why isn’t Mars warm already? It’s just not enough: the atmosphere is very thin (less than 1% of the pressure of Earth’s atmosphere), and what CO2 there is only provides about 5º of warming. We’re going to need to add more GHG. What could it be? Well, for starters, given the volumes required, it should be composed of elements that already exist on Mars. With the ingredients we have, what can we make? Could we get more CO2 in the atmosphere? There is more CO2 on/under the surface, in frozen form, but even that is not enough for the task. We need something else. What about CFCs? As a greenhouse gas, they are about four orders of magnitude more efficient than CO2, so we’d need a lot less of them. However, they require fluorine, which is very rare in the Martian soil, and we’d still need about 100 gigatons of it. This is not encouraging. One thing Mars does have a good amount of is metal, such as iron, aluminum, and magnesium. Now metals, you might be thinking, are not generally known as greenhouse gases. But small particles of conductive metal, with the right size and shape, can act as one. A recent paper found through simulation that “nanorods” about 9 microns long, half the wavelength of the infrared thermal radiation given off by a planet, would scatter that radiation back to the surface (Ansari, Kite, Ramirez, Steele, and Mohseni, “Warming Mars with artificial aerosol appears to be feasible”—no preprint online, but this poster seems to represent earlier work). Suppose we aim to warm the planet by about 30º C, enough to melt surface water in the polar regions during the summer, and bring Mars much closer to Earth temperatures. AKRSM’s simulation says that we would need to put about 400 mg/m3 of nanorods into the Martian sky, an efficiency (in warming per unit mass) more than 2000x greater than previously proposed methods. The particles would settle out of the atmosphere slowly, at less than 1/100 the rate of natural Mars dust, so only about 30 liters/sec of them would need to be released continuously. If we used iron, this would require mining a million cubic meters of iron per year—quite a lot, but less than 1% of what we do on Earth. And the particles, like other Martian dust, would be lifted high in the atmosphere by updrafts, so they could be conveniently released from close to the surface. Wouldn’t metal nanoparticles be potentially hazardous to breathe? Yes, but this is already a problem from Mars’s naturally dusty atmosphere, and the nanorods wouldn’t make it significantly worse. (However, this will have to be solved somehow if we’re going to make Mars habitable.) Kite told me that if we started now, given the capabilities of Starship, we could achieve the warming in a mere twenty years. Most of that time is just getting equipment to Mars, mining the iron, manufacturing the nanorods, and then waiting about a year for Martian winds to mix them throughout the atmosphere. Since Mars has no oceans to provide thermal inertia, the actual warming after that point only takes about a month. Kite is interested in talking to people about the design of a the nanorod factory. He wants to get a size/weight/power estimate and an outline design for the factory, to make an initial estimate of how many Starship landings would be needed. Contact him at [email protected]. I have not yet gotten Kite and Longshot together to figure out if we can shoot the equipment directly to Mars using one really enormous space cannon. Thanks to Reason, Mike Grace, and Edwin Kite for conversations and for commenting on a draft of this essay. Any errors or omissions above are entirely my own.

4th Jan 2024 45 votes
Accelerating science through evolvable institutions

This is the written version of a talk presented to the Santa Fe Institute at a working group on “Accelerating Science.” We’re here to discuss “accelerating science.” I like to start on topics like this by taking the historical view: When (if ever) has science accelerated in the past? Is it still accelerating now? And what can we learn from that? I’ll submit that science, and more generally human knowledge, has been accelerating, for basically all of human history. I can’t prove this yet (and I’m only about 90% sure of it myself), but let me appeal to your intuition: Behaviorally modern humans are over 50,000 years old Writing is only about 5,000 years old, so for more than 90% of the human timeline, we could only accumulate as much knowledge as could fit in an oral tradition In the ancient and medieval world, we had only a handful of sciences: astronomy, geometry, some number theory, some optics, some anatomy In the centuries after the Scientific Revolution (roughly 1500s–1700s), we got the heliocentric theory, the laws of motion, the theory of gravitation, the beginnings of chemistry, the discovery of the cell, better theories of optics In the 1800s, things really got going, and we got electromagnetism, the atomic theory, the theory of evolution, the germ theory In the 1900s things continued strong, with nuclear physics, quantum physics, relativity, molecular biology, and genetics I’m leaving aside the question of whether science has slowed down since ~1950 or so, which I don’t have a strong opinion on. Even if it has, that’s mostly a minor, recent blip in the overall pattern of acceleration across the broad sweep of history. (Or, you know, the beginning of a historically unprecedented reversal and decline. One or the other.) Part of the reason I’m pretty convinced of this accelerating pattern is that it’s not just science that is accelerating: pretty much all measures of human advancement show the same trend, including world GDP and world population. What drives acceleration in science? Many factors, including: Funding. Once, scientists had to seek patronage, or be independently wealthy. Now there is grant money available, and the total amount of funding has increased significantly in the last several decades: American Association for the Advancement of Science People. More scientists (all else being equal) means science moves faster, and the number of scientists has grown dramatically, both because of overall population growth and because of a greater portion of the workforce going into research. In Science Since Babylon, Derek J. de Solla Price suggested that “Some 80 to 90 percent of all scientists that have ever been, are alive now,” and this is probably still true: Eric Gastfriend Instruments. Better tools means we can do more and better science. Galileo had a simple telescope; now we have JWST and LIGO. Computation. More computing power means more and better ways to process data. Communication. The faster and better that ideas can spread, the more efficient and effective scientific communication can be. The scientific journal was invented only after the printing press; the Internet enabled preprint servers such as arXiv. Method. Better methods make for better science, from Baconian empiricism to Koch’s postulates to the RCT (and really, all of statistics). Institutions. Laboratories, universities, journals, funding agencies, etc. all make up an ecosystem that enables modern science. Social status. The more science carries respect and prestige, the more people and money flow into it. Now, if we want to ask whether science will continue to accelerate, we could think about which of these driving factors will continue to grow. I would suggest that: Funding for science will continue to grow as long as the world economy does Instruments, computation, and communication will continue to improve along with technology in general I see no reason why method should not continue to improve, as part of science itself The social status of science seems fairly strong: it is a respected and prestigious institution that receives some of society’s top honors In the long run, we may run out of people to continue to grow the base of researchers, if world population levels off as it is projected to do, and that is a potential concern, but not my focus today. The biggest red flag is with our institutions of science. Institutions affect all the other factors, especially the management of money and talent. And today, many in the metascience community have concerns about our institutions. Common criticisms include: Speed. It can easily take 12–18 months to get a grant (if you’re lucky) Overhead. Researchers typically spend 30–50% of their time on grants Patience. Researchers feel they need to show results regularly and can’t pursue a path that might take many years to get to an outcome Risk tolerance. Grant funding favors conservative, incremental proposals rather than bold, “high-risk, high-reward” programs (despite efforts to the contrary) Consensus. A field can converge on a hypothesis and prune alternate branches of study too quickly Researcher age. The trend over time is for grant money to go to older, more established researchers Freedom. Scientists lack the freedom to direct their research fully autonomously; grant funding has too many strings attached Now, as a former tech founder, I can’t help but notice that most of these problems seem much alleviated in the world of for-profit VC funding. Raising VC money is relatively quick (typically a round comes together in a few months rather than a year or more). As a founder/CEO, I spent about 10–15% of my time fundraising, not 30–50%. VCs make bold bets, actively seek contrarian positions, and back young upstarts. They mostly give founders autonomy, perhaps taking a board seat for governance, and only firing the CEO for very bad performance. (The only concern listed above that startup founders might also complain about is patience: if your money runs out, you’d better have progress to show for it, or you’re going to have a bad time raising the next round.) I don’t think the VC world does better on these points because VCs are smarter, wiser, or better people than science funders—they’re not. Rather, VCs: Compete for deals (and really don’t want to miss good deals) Succeed or fail in the long run based on the performance of their portfolio See those outcomes within a matter of ~5–10 years In short, VCs are subject to evolutionary pressure. They can’t get stuck in obviously bad equilibria because if they do they will get out-competed and lose market power. The proof of this is that VC has evolved over the decades—mostly in the direction of better treatment for founders. For instance, there has been a long-term trend towards higher valuations at earlier stages, which ultimately means lower dilution and a shift in power from VCs to founders: it used to be common for founders to give up half or more of their company in the first round of funding; last I checked that was more like 20% or less. VCs didn’t always fund young techies right out of college; there was a time when they tended to favor more experienced CEOs, perhaps with an MBA. They didn’t always support founder-led companies; once it was common for founders to get booted after the first few years and replaced with a professional CEO (when A16Z launched in 2009 they made a big deal out of how they were not going to do that). So I think if we want to see our scientific institutions improve, we need to think about how they can evolve. How evolvable are our scientific institutions? Not very. Most scientific organizations today are departments of university or government. Much as I respect universities and government, I think anyone would have to admit that they are some of our more slow-moving institutions. (Universities in particular are extremely resilient and resistant to change: Oxford and Cambridge, for instance, date from the Middle Ages and have survived the rise and fall of empires to reach the present day fairly intact.) The challenges to the evolvability of scientific funding institutions are the inverse of what makes VC evolvable: They tend to lack competition, especially centralized federal agencies such as NIH and NSF They lack any real feedback loop in which a funder’s resources are determined somehow by past judgment and the success of their portfolio (Michael Nielsen has repeatedly pointed out that failures of funding from “Einstein did his best work as a patent clerk” to “Katalin Karikó was denied grants and tenure before she won the Nobel prize” don’t seem to even spark processes of reflection within the relevant institutions) They face long cycle times to learn the true impact of their work, which might not be apparent for 20–30 years How might we improve evolvability of science funding? We should think about how we can improve these factors. I don’t have great ideas, but I’ll throw some half-baked ones out there to start the conversation: How might we increase competition in science funding? We could increase the role of philanthropy. In the US, we could shift federal funding to the state level, creating fifty funders instead of one. (State agricultural experiment stations are a successful example of this, and competition among these stations was key to hybrid corn research, one of the biggest successes of 20th-century agricultural science.) At the international level, we could support more open immigration for scientists. How might we create better feedback loops? This is tough because we need some way to measure outcomes. One way to do that would be to shift funding away from prospective grants and more towards a wide variety of retrospective prizes, at all levels. If this “economy” were sufficiently large and robust, these outcomes could be financialized in order to create a dynamic, competitive funding ecosystem, with the right level of risk-taking and patience, the right balance of seasoned veterans vs. young mavericks, etc. (Certificates of impact, such as hypercerts, could be part of this solution.) How might we solve long feedback cycles? I don’t know. If we can’t shorten the cycles, maybe we need to lengthen the careers of funders, so they can at least learn from a few cycles—a potential benefit of longevity technology. Or, maybe we need a science funder that can learn extremely fast, can consume large amounts of historical information on research programs and their eventual outcomes, never forgets its experience, and never retires or dies—of course, I’m thinking of AI. There’s been a lot of talk of AI to support, augment, or replace scientific researchers themselves, but maybe the biggest opportunity for AI in science is on the funding and management side. I doubt that grant-making institutions will shift themselves very far in this direction: they would have to voluntarily subject themselves to competition, enforce accountability, and admit mistakes, which is rare. (Just look at the institutions now taking credit for Karikó’s Nobel win when they did so little to support her.) If it’s hard for institutions to evolve, it’s even harder for them to meta-evolve. But maybe the funders behind the funders, those who supply the budgets to the grant-makers, could begin to split up their funds among multiple institutions, to require performance metrics, or simply to shift to the retrospective model indicated above. That could supply the needed evolutionary pressure.

4th Dec 2023 54 votes
What I’ve been reading, November 2023

A ~monthly feature. Recent blog posts and news stories are generally omitted; you can find them in my links digests. All emphasis in bold in the quotes below was added by me. Books Finished Lynn White, Medieval Technology and Social Change (1962). Last time I talked about the stirrup thing. The second part of the book is about the introduction of the heavy plow in agriculture, and how it enabled the shift to a three-field crop rotation. Among other things, this provided more protein in the European diet, which made for a healthier population. The third part is a survey of medieval power mechanisms, including water mills, crank shafts, and clock escapements. Very interesting overall, perhaps a bit dry and technical for casual readers though. Note also that since it is from the ’60s it is not up to date with the latest research. Also finished Ian Tregillis’s The Alchemy Wars. I can now definitely recommend this sci-fi/fantasy trilogy, even if the cast of characters and the way the conflict unfolded isn’t exactly how I would have written it myself. Browsed Derek J. de Solla Price, Science since Babylon (1961), while preparing for a talk. Some very interesting charts such as this: Science since Babylon, p. 97 New on my reading list: Venkatesh Narayanamurti and Toluwalogo Odumosu, Cycles of Invention and Discovery: Rethinking the Endless Frontier (2016), and Venkatesh Narayanamurti and Jeffrey Tsao, The Genesis of Technoscientific Revolutions: Rethinking the Nature and Nurture of Research (2021). These have actually been on my list for a while, but got bumped back up after meeting Venky and Jeff at a recent workshop on metascience. (The latter book is required reading at Speculative Technologies.) Also mentioned at the workshop: B. Zorina Khan, Inventing Ideas: Patents, Prizes, and the Knowledge Economy (2020); and A Michael Noll and Michael Geselowitz, Bell Labs Memoirs: Voices of Innovation (2011). Also: Pedro Domingos, The Master Algorithm: How the Quest for the Ultimate Learning Machine Will Remake Our World (2015) Robert Martello, Midnight Ride, Industrial Dawn: Paul Revere and the Growth of American Enterprise (2010) Jessie Singer, There Are No Accidents: The Deadly Rise of Injury and Disaster—Who Profits and Who Pays the Price (2022) Ursula Le Guin, The Dispossessed (1974) (sci-fi) Articles Ray Kurzweil, “The Law of Accelerating Returns” (2001). Kurzweil strikes me as a grand theorist but not a careful scholar—a risky combination. For instance, he writes: “Homo sapiens evolved in a few hundred thousand years. Early stages of technology—the wheel, fire, stone tools—took tens of thousands of years to evolve and be widely deployed.” Stone tools, fire, and the wheel are often depicted in cartoons featuring cavemen. But stone tools evolved over millions of years; the controlled use of fire is something like several hundred thousand years old; and both predate Homo sapiens. The wheel came much later, well after agriculture and settled society. Details like this are a warning to tread carefully. That said, I was interested to read this essay because I am starting to see the truth and significance of its core idea: that human progress accelerates over time, following a super-exponential curve. This phenomenon has been documented more broadly in the economics literature, such as by Jones and Romer (2010), who refer to “accelerating growth” as one of the key stylized facts that growth models should attempt to explain. I have described acceleration as resulting from the compounding of multiple feedback loops: increases in wealth, population, science, markets, institutions, and technology allow us to invent more, improve institutions, expand markets, advance science, grow population, accumulate wealth, etc. Kurzweil sees the phenomenon as not merely technological, but biological—a feature of evolution as such (and he sees technological evolution as simply a continuation of biological evolution by more efficient means). In his telling, as evolution progresses, it sometimes evolves better mechanisms for evolving. This is a very intruiging idea, but he doesn’t argue it with any rigor or present much evidence for it, and I don’t know enough about biology or evolution to evaluate it. He mentions “cells” as the “first step” in evolution, and then refers to “the subsequent emergence of DNA” (but wasn’t DNA present from the origins of life?) He indicates that evolution sped up during the Cambrian Explosion, and credits this to “setting the ‘designs’ of animal body plans”, but doesn’t elaborate on the causal connection except to say that this “allowed rapid evolutionary development of other body organs, such as the brain.” Presumably sexual reproduction should be a major event in this story, since it allows for more variation through genetic recombination, but he doesn’t mention it. So, it’s very unclear to me what to make of this story (although if it’s right, it would extend the “accelerating progress” pattern backwards by more than three billion years). Ray Kurzweil Grand theories aside, I was very interested in his analysis of computing power. He plotted the computing speed per dollar of dozens of devices, all the way from late 19th-century mechanical calculators through early 21st-century microprocessors, and claims to have found a increasing cost-performance curve running through five generations of computing technology: purely mechanical, electromechanical, vacuum tube, transistor, and integrated circuit. Moore’s Law is only the fifth and most recent segment of this much longer trend, one exponential portion of an overall super-exponential curve: Kurzweil, The Law of Accelerating Returns I’d like to check the data and sources on this one, but it’s a very intriguing pattern. The full essay is very long and covers many not-super-well-connected topics, which I don’t have time to comment on; the core idea is in this 2004 Edge question, but doesn’t contain all the most interesting details (such as the computing trends just mentioned). The same accelerating curve, and the same basic explanation based on feedback loops, seems to be the gist of David Roodman, “Modeling the Human Trajectory” (2020), which I have only skimmed but plan to return to. Others: Deirdre N. McCloskey reviews Acemoglu and Johnson’s Power and Progress (2023). If you know anything about the book, and anything about McCloskey, you won’t be surprised that she is critical: The invisible hand of human creativity and innovation, in the authors’ analysis, requires the wise guidance of the state. … This is a perspective many voters increasingly agree with—and politicians from Elizabeth Warren to Marco Rubio. We are children, bad children (viewed from the right) or sad children (viewed from the left). Bad or sad, as children we need to be taken in hand. Messrs. Acemoglu and Johnson warmly admire the U.S. Progressive Movement of the late 19th century as a model for their statism: experts taking child‐citizens in hand. Robert Tracinski, “We Are All Philosophers Now” and “The Dilemma of Choice” (2023). Modernity has replaced a narrow, limited set of social roles and life choices with a smorgasbord of options. This is liberating, but the price of the freedom of choice is the responsibility of choice, which is now everyone’s to bear. Not everyone is happy about this. Rob’s pithy summary: “If Socrates said that the unexamined life is not worth living, well, now it’s not really an option.” Virginia Postrel, “What ails American culture?” (2023). On similar themes: Human beings need to feel purpose and meaning in their lives. But I am not entirely sure that the current discontent is a product of material abundance, that people did not feel similar discontent in the past, or that the “economic problem” loomed so large in the past that it dwarfed all other problems. Ben Landau-Taylor, “The Vocabulary Of Power” (2023). “Power” can mean many things; here are four more precise terms. Not only will this help clarify your concepts, it will also fulfill your daily quota of thinking about the Roman Empire. Tanner Greer, “Where Have All the Great Works Gone?” (2021): Spengler … repeatedly describes Tolstoy (d. 1910), Ibsen (d. 1906), Nietzsche (d. 1900), Hertz (d. 1894), Dostoevsky (d. 1881), Marx (d. 1883), and Maxwell (1879) as figures of defining “world-historical” importance… Spengler began writing Decline of the West in 1914. Tolstoy was only four years dead when Spengler started his book; Marx was only 30 years deceased. … Is there anyone who died in the last decade you could make that sort of claim for? How about for the last two decades? The last three? Gideon Lewis-Kraus, “They Studied Dishonesty. Was Their Work a Lie?” (2023). A case study of scientific fraud. Stephen Wolfram, “Are All Fish the Same Shape If You Stretch Them? The Victorian Tale of On Growth and Form” (2017) I just thought this idea was kind of hilarious: D’Arcy Thompson, On Growth and Form

7th Nov 2023 60 votes

More in science

Every US Electrical Outlet Explained

[Note that this article is a transcript of the video embedded above.] I love the periodic table of the elements. I love it because it reveals the deeper order of what seems like an otherwise wildly disparate collection of atoms with different physical forms, chemical properties, and nuclear stabilities. I love it because, even before we actually found the elements that fit into each box, we knew that something did and could even predict some things about those elements before they were ever discovered. And finally, I love it because it’s a bit messy. Not everything lines up perfectly, and in some ways, it’s still a work in progress. In many ways, human-created standards follow that same form, and I want to try and convince you that they deserve the same affection. Let me present the periodic table of standard North American electrical connections. Isn’t it beautiful? I’m fascinated by stuff like this: a diversity of needs and purposes put into a relatively nice, neat order. But why do we need so many? And where do any of these actually get used? Well, I’ve spent the past month reading just about everything I could find on electrical plugs and receptacles to figure those questions out, and I even have a few of them here so I can show you what I learned. I’m Grady, and this is Practical Engineering. Electricity is something we really don’t want to be proprietary. It’s one thing if your charger doesn’t work on your buddy’s cell phone. It’s another thing entirely when you have to rewire your house because you bought a different brand of toaster. The National Electrical Manufacturers Association, or NEMA, was founded in 1926 as a coalition of companies making electrical equipment. Their members realized that life would be better with some standards, so that any company making an electrical device could be reasonably confident that the people who might want to buy that device would be able to use it, and more importantly, use it safely. This didn’t happen overnight. It took a diverse group of manufacturers, engineers, and testing labs to form a consensus around the system we use today. And it’s far from a perfect system. My friends Mehdi and Alec have covered receptacle-related topics on their channels, including the merits and disadvantages of the NEMA designs. But it works pretty well. Well enough that the NEMA connector standards have been adopted not just in the US, but all of North America, Central America, parts of South America, Japan, Taiwan, the Philippines, and beyond. Here’s that table again. You probably noticed that every type of plug and receptacle has its own special number. They seem a bit arcane at first glance, but it’s actually a handy naming scheme that’s pretty straightforward to understand. The first number is the configuration that defines the combination of voltage rating, wire count, and grounding style. These numbers are a bit arbitrary, but they kind of represent a certain class of receptacles and plugs. For example, NEMA 1 receptacles are rated for 125 volts and have just 2 poles (a hot and neutral) with no ground. The NEMA 1-15 was the classic North American outlet until the 1960s, and you still see these in older buildings. Lots of devices made today can still use them, especially low-voltage equipment like chargers, and, critically, those without external metal parts. If an energized wire inside the device comes loose and contacts the case, there’s still an insulating barrier protecting someone from being shocked. The reason NEMA 1 receptacles are mostly a thing of the past is what could happen when equipment didn’t have that protection. If a device with a metal enclosure or exposed metal parts had an energized wire come loose, that metal would be energized too. But, critically, it might not create a short circuit. With nowhere for current to flow, the device could just sit there, indefinitely dangerous, until someone happened to touch it, allowing current to flow through them to a lower potential. The ground wire we see in nearly all plugs and receptacles today fixes that specific hazard. Bonding exposed conductive elements and connecting them to ground makes sure that if they somehow become energized, current will flow, a short circuit will form, and protective devices like breakers will activate. Today we use the NEMA 5 standard for the vast majority of receptacles and plugs. Even if you’ve never heard of NEMA or seen the other plugs on the periodic table, you’re almost certainly familiar with this design. They have a 125 volt rating to handle the standard 120 volt service for most electrical devices with a little buffer. They have an energized pole, called the hot; a neutral pole to provide a return path, and a separate ground return that is bonded to the neutral line in the main electrical panel. The ground pin on most outlets is round instead of flat, and that’s the reason why nearly all electrical outlets kind of look like they’re screaming. Or at least they do to me. One thing about NEMA 5, and actually most of the NEMA configurations, is that the outlets have polarity. On the NEMA 5-15, the neutral slot is a bit wider than the hot, making it so the plug can only go in one way. In function, polarity often doesn’t matter for AC circuits. Current travels in both directions, so the equipment inside the device can’t really tell the difference. And some devices, like switch-mode power supplies, don’t care which direction they’re plugged in. Both blades are the same size. For safety, though, a lot of devices do. You really don’t want heating elements, motor coils, and circuit boards energized and waiting for a ground. It’s less hazardous to put the switch on the hot wire so that nothing beyond the cord is energized until it’s turned on. Enforcing polarity at the plug prevents “switched neutrals” along with other issues like electrical noise. The NEMA 5-15 plug and outlet were designed to be backward compatible with the older 1-15 standard. 1-15 plugs work just fine in the modern 5-15 outlets, and there are quite a few interesting compatibility cases like that in the NEMA standards. For example, the “15” in 5-15 refers to the current rating. Nearly every household device and appliance that runs on 120 volts is designed so that it never draws more than 15 amps, and actually, if the device is meant to run for more than 3 hours continuously, like a space heater, it can only draw 80% of that (which is 12 amps if you’re keeping score at home). That limit is obviously fine for most household appliances. But, especially in commercial spaces, it’s not quite enough power for certain devices like kitchen mixers, treadmills, copy machines, and power tools. Of course, we could just change the codes to require 20-amp circuits everywhere, but that has huge implications: larger circuit breakers, heavier-gauge wiring, and more expensive receptacles. And in many cases, it’s just not necessary. So instead, NEMA created a different receptacle and plug for 120-volt, 20-amp circuits, the 5-20. I have a bunch of these in the studio. You can see they have that T shape on the neutral slot. And 20-amp devices have the neutral blade rotated 90 degrees on the plug. But here’s the backward compatibility: regular 15-amp plugs fit into the 5-20 receptacle as well. NEMA 5 has 30 and 50 amp receptacles too, although they aren’t used very often these days because of a quirk about the historic availability of voltage. Today, split phase electrical service is basically standard for residential power. You get two 120-volt hot lines which can be used individually for smaller circuits or combined to get 240-volts for circuits that need more oomph. In the early 20th century, 240-volt service wasn’t always available, so you have these very-high-current 120-volt receptacles that could power heavy commercial cleaning equipment like floor burnishers and blowers, kitchen equipment like warming cabinets and steam tables, and large shop tools like table saws and compressors. Also, not all portable generators run at 240-volts, so older models used the larger NEMA 5 receptacles as well. These are still available and installed in places where, for whatever reason, a higher-voltage circuit is hard to come by. But in most cases, the more power-hungry devices are going to run on 240-volts. That brings us to NEMA 2. Like NEMA 1, these are ungrounded receptacles, but instead of a hot and neutral, they have two hots. Each is 180 degrees out of phase with its neighbor, so you get 240-volts across them, handled with a little cushion by the 250-volt rating. There were 20 and 30 amp receptacles, but, also like NEMA 1, these are mostly obsolete now that a ground is required by code. They’ve been replaced with NEMA 6, which has 15, 20, 30, and 50-amp receptacles and plugs. Of course, with double the voltage, you also get double the power compared to the NEMA 5 equivalents at the same current rating. The 6-15 is common for window or wall-mounted air conditioners. The 6-20 is used for heavier-duty air conditioners plus commercial kitchen equipment and shop tools. The 6-30 is used with large heaters, kilns, and heavy power tools. The 6-50 is kind of the standard welder outlet, plus it’s pretty common these days for level 2 EV chargers, capable of delivering nearly 10 kilowatts of continuous power through the receptacle. Like NEMA 5, the NEMA 6 has some backward compatibility, allowing 6-15 plugs to fit into 6-20 receptacles. This is kind of clever, but it doesn’t work all the way up the different current ratings. Of course a 50-amp outlet could easily handle a 15-amp device. And it would certainly be possible to design a series of outlets where each successive jump in current rating allowed those smaller devices to plug in. But there are two main reasons why they don’t: One is practicality. The blades on plugs aren’t all the same thickness. Designing a single receptacle slot that can safely grip both a thin, 15-amp blade and a massive 50-amp one would make manufacturing more difficult and increase the chances of developing loose connections inside the receptacle over time. Two is safety: circuit breakers are sized to protect everything downstream, including the plug and the appliance cord. If a thin cord on a low-current device develops an internal short, the resistance of that thin wire itself will cap the fault current so that a larger breaker might take much longer to trip or not trip at all. That could allow the wire to reach high enough temperatures to start a fire. Of course you don’t want a high-current device plugged into a lower-current-rated circuit, but if you trace out the things that can go wrong, it turns out that you also don’t want lower-current devices plugged into a high-capacity circuit. So, the plugs and outlets are designed to prevent both cases, except for the 15 and 20 amp situation, where the current is close enough that a breaker should still work as intended. 240 volts are useful to supply more power at the same current rating, but of course it comes at a cost. Higher voltage means more potential, literally, for arcs to occur. Equipment designed to handle the higher voltage needs better insulation and more careful design. Take a clothes dryer for example. You want the extra voltage for the power-hungry heating elements, but all the other stuff inside (like timers, controllers, and clocks) can easily run on 120 and those lower-voltage components are more affordable. That’s where NEMA 10 came in. You get three poles: two hots and a neutral. In that way, you get dual voltage: 240 between the hots and 120 between each hot and neutral. Of course, NEMA 10 receptacles also lack a ground connection, so they’re mostly obsolete. Plenty of houses still have them installed for clothes dryers and kitchen ranges, but since the 1990s, they’ve been supplanted with the NEMA 14 configuration. This is the most widely-used 240-volt standard in North America today. It’s versatile, providing both voltages. And there are a full range of current capacities, allowing you to design a circuit that’s well-suited for a device, from 15 all the way up to 60 amps. The 14-15 is pretty rare. I couldn’t even find someone making the receptacle. The 14-20 is also not that common. Some food service equipment uses this like certain coffee makers. The warmers rely on 240 volts while the fans and timers run on 120. Same with some jobsite heaters and specialized laboratory equipment. The 14-30 is the standard residential electric clothes dryer plug and is often used for EV chargers. Some server and mainframe equipment uses it as well. The 14-50 is the standard residential cooking range and oven plug. It’s also widely used for EV chargers and pretty common at RV campgrounds as well. The 14-60 is more of a commercial or industrial receptacle, used for large kitchen appliances and distribution of power at events like concerts. Single phase electrical service covers nearly all residential and lots of commercial buildings. But, the grid runs on three phases and it’s pretty common for larger commercial buildings and essentially all industrial facilities to have three-phase service. It’s particularly useful for devices that use large motors. And of course, if you have the service, you’re going to need receptacles and plugs for those devices, or at least the ones that aren’t hard-wired. NEMA 11 was the standard for up to 250V with receptacles and plugs ranging from 15 to 50 amps. Those have been replaced by the new NEMA 15, again because of grounding requirements. And this is going to almost always be relatively specialized industrial devices: woodshop and machining tools, laboratory testing equipment, grinders, pumps, dust collectors, heavy welders, plasma cutters, and so on. It’s not stuff most people see in everyday life, and in many cases, each receptacle is going to be custom-installed for a specific piece of equipment. And since hard-wiring equipment directly to the service panel is typically the default, that makes receptacles like these even more rare. You really only see them in places that need a high degree of modularity, allowing for rapid reconfiguration of workspaces like jobsites, certain manufacturing facilities, and short life-cycle equipment that needs to be easily swapped out. There are two main three-phase service classes used in most commercial and industrial buildings in the US. The most common is 208 volts phase to phase, which uses the NEMA 15 configuration. There’s also 480 volts phase to phase, but like I mentioned before, you can get a lower voltage between phase and neutral (in this case, 277 volts). So NEMA 7 has plugs and receptacles specifically for using just one phase from buildings wired with 480-volt, three-phase service. A lot of commercial and industrial lights use these receptacles, like warehouses, factories, and arenas, making them easy to swap out without hard-wiring. Commercial ventilation and air conditioning systems use them too. And just like the dual-voltage 240-volt plugs, there are also dual-voltage three-phase plugs, delivering equipment with all three hot phases plus a neutral so different components can run at different voltages. NEMA 18 has receptacles for 208-volt service, although they don’t have a ground, so they’re mostly obsolete. There are no straight-blade plugs that have replaced NEMA 18. Aligning and inserting a 5-blade plug would be tricky and take a lot of force. And I’ve kind of buried the lede here only talking about the straight-blade NEMA standards. The reality is that a large number of the NEMA receptacles and plugs have an equivalent locking version. These use curved blades that twist inside the receptacle so they can’t be easily pulled out. Actually the locking versions are more common than the straight-blade equivalents in many cases, especially when it comes to portable generators, jobsite equipment, and events where things are always moving around. If your vacuum cleaner unplugs itself because you’ve gone too far into the hallway, that’s usually not a big deal, but if a three-phase 600 volt plasma cutter does the same thing, you can get serious damage from arcing. That’s why the locking standards extend beyond the voltage ratings of the straight-blade ones up to three-phase 600-volt circuits. They even have receptacles for 400-hertz power used in aerospace, submarine, and military systems. Of course, sometimes the standards make themselves. When it comes to RVs and travel trailers, (from what I can gather) the industry had already developed a 120-volt, 30-amp receptacle before NEMA formalized its catalogue of standards. Instead of forcing an entire industry to retool, NEMA just adopted what everyone was already using, calling it the TT-30. TT for travel trailer and 30 for the current capacity. In function, it’s not any different than the NEMA 5-30 receptacle and plug, but you’ll almost never see one of those, because the TT-30 is far more common. It’s a face only an outlet enthusiast could love. I haven’t really talked about the smaller versions of the locking connectors used where space is an issue. And there are even more specialized standards like ship-to-shore power, aircraft, and military uses. Of course, when you look beyond NEMA, there are way more standards out there. But I feel like this is enough to get you excited about the weird, wide world of electrical receptacle standardization. There are all kinds of practical considerations that make it much more complicated than just a 2D chart with voltage on one side and current on the other. Just like the periodic table of the elements, the NEMA connection standards are a bit messy. And that’s what I love about them.

yesterday 1 votes
367 | Jared Diamond on the Course of History and the Role of Leaders

The course of history is affected by many things, including the political and social situations of large groups of people, […]

a week ago 1 votes
How can objects interact without touching? 

Rethinking the electric field Have you ever wondered what an electric field actually is?  The electric field is the foundation of most technologies that we rely on every day. From power grids and electronic devices to radio communication and the … Continue reading →

a week ago 1 votes
NSF, spending, and the end of the fiscal year

We are less than one month away from the end of the federal fiscal year, and traditionally there are internal deadlines for agencies to allocate their final spending by around September 9. Right now, the NSF is on track to issue about 4000 fewer (!!) awards in FY26 than it did annually back in FY21-FY24, and 2000 fewer than it did in the incredibly tumultuous FY25 (with its government shutdowns and mass cutbacks in agency personnel). This is dire, if like me you are a supporter of the agency and its vital role in the US research ecosystem.   Perhaps even more distressing, the NSF is on track to underspend its FY26 budget appropriation (congressionally approved, presidentially signed) by between $1.25-1.5B, or 15-18%. This is essentially unprecedented - in the past, the NSF has always spent ~ 99% of its appropriation in a given fiscal year. Some large portion of this is from the mid-FY clawbacks that were reported in Science and Nature, supposedly squirreled away to support an as-yet unannounced OSTP "grand challenges" program.   While technically the funds don't go away at the end of September, this kind of underspending raises the possibility of a pocket rescission. OMB and the executive branch have been pushing for massive cuts to the agency; Congress has disagreed. It sure looks like all the "see, don't worry, Congress didn't allow big cuts to the NSF" palliative statements don't hold up very well to scrutiny, if the majority party is content to just give up Article I power to the executive branch.  In this period of complete flood-the-zone craziness, the mainstream news media seemingly doesn't have the bandwidth or interest to report on this; they seem to have judged that it's too obscure, it doesn't play in Peoria, the public doesn't really care. This kind of disruption will have ripple effects that last for many years and affect US scientific and economic competitiveness, and it's happening without much notice. This week's news about an agreement between NIH and DOD to funnel NIH funds for infectious disease to DOD (or, in the official statement, to work together on projects of mutual interest), is at least getting some public attention.  Agencies agreeing to pass around at minimum hundreds of millions of dollars outside congressional oversight or what the appropriations acts say is another example of an Article I crisis, when the majority party basically hands over what are supposed to be congressional powers to executive branch. (An additional sciencey blog post coming soon!)

a week ago 1 votes
New Book!

I am working on a new book called You Would Choose Now: Measuring America’s Progress Toward Fairness and Tolerance. It’s a data-driven exploration of progress (or not) in public opinion and civil rights. I posted the first two chapters as an Early Access edition on LeanPub (a platform for posting work in progress like this): https://leanpub.com/ywcn If you would like to check it out, the “Free Sample” has just the first chapter. If you sign up with an email address,... Read More Read More The post New Book! appeared first on Probably Overthinking It.

a week ago 1 votes
📚 BoredReading

You seem to be enjoying this.

Join free to unlock everything.

Create free account

Already have an account? Sign in