Installing OpenBSD on Linveo KVM VPS 2024-10-21 I recently came across an amazing deal for a VPS on Linveo. For just $15 a year they provide: AMD KVM 1GB 1024 MB RAM 1 CPU Core 25 GB NVMe SSD 2000 GB Bandwidth It’s a pretty great deal and I suggest you look more into it if you’re interested! But this post is more focused on setting up OpenBSD via the custom ISO option in the KVM dashboard. Linveo already provides several Linux OS options, along with FreeBSD by default (which is great!). Since there is no OpenBSD template we need to do things manually. Getting Started Once you have your initial VPS up and running, login to the main dashboard and navigate to the Media tab. Under CD/DVD-ROM you’ll want to click “Custom CD/DVD” and enter the direct link to the install76.iso: https://cdn.openbsd.org/pub/OpenBSD/7.6/amd64/install76.iso The "Media" tab of the Linveo Dashboard. Use the official ISO link and set the Boot Order to CD/DVD. Select “Insert”, then set your Boot Order to CD/DVD and click “Apply”. Once complete, Restart your server. Installing via VNC With the server rebooting, jump over to Options and click on “Browser VNC” to launch the web-based VNC client. From here we will boot into the OpenBSD installer and get things going! Follow the installer as you normally would when installing OpenBSD (if you’re unsure, I have a step-by-step walkthrough) until you reach the IPv4 selection. At this point you will want to input your servers IPv4 and IPv6 IPs found under your Network section of your dashboard. Next you will want to set the IPv6 route to first default listed option (not “none”). After that is complete, choose cd0 for your install media (don’t worry about http yet). Continue with the rest of the install (make users if desired, etc) until it tells you to reboot the machine. Go back to the Linveo Dashboard, switch your Boot Order back to “Harddrive” and reboot the machine directly. Booting into OpenBSD Load into the VNC client again. If you did everything correctly you should be greeted with the OpenBSD login prompt. There are a few tweaks we still need to make, so login as the root user. Remember how we installed our sets directly from the cd0? We’ll want to change that. Since we are running OpenBSD “virtually” through KVM, our target network interface will be vio0. Edit the /etc/hostname.vio0 file and add the following: dhcp !route add default <your_gateway_ip> The <your_gateway_ip> can be found under the Network tab of your dashboard. The next file we need to tweak is /etc/resolv.conf. Add the following to it: nameserver 8.8.8.8 nameserver 1.1.1.1 These nameservers are based on your selected IPs under the Resolvers section of Network in the Linveo dashboard. Change these as you see fit, so long as they match what you place in the resolve.conf file. Finally, the last file we need to edit is /etc/pf.conf. Like the others, add the following: pass out proto { tcp, udp } from any to any port 53 Final Stretch Now just reboot the server. Log back in as your desired user and everything should be working as expected! You can perform a simple test to check: ping openbsd.org This should work - meaning your network is up and running! Now you’re free to enjoy the beauty that is OpenBSD.

Burning & Playing PS2 Games without a Modded Console 2024-09-02 Important: I do not support pirating or obtaining illegal copies of video games. This process should only be used to copy your existing PS2 games for backup, in case of accidental damage to the original disc. Requirements Note: This tutorial is tailored towards macOS users, but most things should work similar on Windows or Linux. You will need: An official PS2 game disc (the one you wish to copy) A PS2 Slim console An Apple device with a optical DVD drive (or a portable USB DVD drive) Some time and a coffee! (or tea) Create an ISO Image of Your PS2 Disc: Insert your PS2 disc into your optical drive. Open Disk Utility (Applications > Utilities) In Disk Utility, select your PS2 disc from the sidebar Click on the File menu, then select New Image > Image from [Disc Name] Choose a destination to save the ISO file and select the format as DVD/CD Master Name your file and click Save. Disk Utility will create a .cdr file, which is essentially an ISO file Before we move on, we will need to convert that newly created cdr file into ISO. Navigate to the directory where the .cdr file is located and use the hdiutil command to convert the .cdr file to an ISO file: hdiutil convert yourfile.cdr -format UDTO -o yourfile.iso You’ll end up with a file named yourfile.iso.cdr. Rename it by removing the .cdr extension to make it an .iso file: mv yourfile.iso.cdr yourfile.iso Done and done. Getting Started For Mac and Linux users, you will need to install Wine in order to run the patcher: # macOS brew install wine-stable # Linux (Debian) apt install wine Clone & Run the Patcher Clone the FreeDVDBoot ESR Patcher: git clone https://git.sr.ht/~bt/fdvdb-esr Navigate to the cloned project folder: cd /path/to/fdvdb-esr The run the executable: wine FDVDB_ESR_Patcher.exe Now you need to select your previously cloned ISO file, use the default Payload setting and then click Patch!. After a few seconds your file should be patched. Burning Our ISO to DVD It’s time for the main event! Insert a blank DVD-R into your disc drive and mount it. Then right click on your patched ISO file and run “Burn Disk Image to Disc...". From here, you want to make sure you select the slowest write speed and enable verification. Once the file is written to the disc and verified (verification might fail - it is safe to ignore) you can remove the disc from the drive. Before Playing the Game Make sure you change the PS2 disc speed from Standard to Fast in the main “Browser” setting before you put the game into your console. After that, enjoy playing your cloned PS2 game!

Perspective 2024-08-06 I recently read both Starting Hospice and No Salt posted on Jake’s blog and was quite moved. I don’t know Jake and have never met him - but his writing and shared experiences give a very real look into his mind and perspective. If you haven’t yet, I strongly recommend giving his site a read (or at the very least those two posts). It made me reflect on my own life, shift my perspective and realize how fortunate I truly am. Losing Focus I think we all find ourselves losing focus on the truly important things in life. That’s normal and expected. Maybe your house needs repairs, or you’re crunching for an upcoming deadline, or your prepping for a long a work trip, or your stressed out hunting for a job. Whatever it might be, our brains are very good at getting derailed and putting all our attention into less important things. But I believe our minds need to wander and focus on the less important. Otherwise your mental health would suffer greatly. And I should note, some of these “stresses” still require our attention. I just don’t think they should consume us. I’m not advocating that we need to constantly be obsessing over the limited time we have on this spinning rock, or that we should smother our families with over-the-top love. Just stopping and reflecting on these things can really put any worries you have into perspective. It might be cliche to state the obvious, “Be grateful for what you have!” but cliche or not - it’s true. Jake will be leaving behind not just his friends and family, but also his wife who is 7-months pregnant. I can’t begin to imagine the range of emotions everyone close to him must be feeling. I know I would be furious, which doesn’t make sense since something like this is so far removed from human control. Being angry would just be wasted energy. But that’s easier said than done. I don’t have a whole lot else to say on the matter. This post also pales in comparison to Jake’s actual experience and shared perspective on his site. I really wasn’t even sure to share this on my site, in fear that I would be somehow disrespecting Jake’s memory (along with his much better writing skills and openness). But then I thought, if anything, I could help reach Jake’s story to even one other person and help them reflect on their own perspective as well. Now if you’ll excuse me, I’m going to take a long, purposefully slow walk with my family.

Building rbenv on OpenBSD 7.5 2024-06-02 I use Ruby (specifically with Jekyll) for a lot of my clubs/projects while using my personal laptop (X220 ThinkPad) which is runs OpenBSD. Since I recently upgraded to OpenBSD 7.5 I thought it could be helpful for others if I shared my process of building and using rbenv to install different Ruby versions. Before We Build First, be sure to install the required packages in order to build from source, and then clone the core rbenv repo: pkg_add git gcc gmake libffi libyaml openssl git clone https://github.com/rbenv/rbenv.git ~/.rbenv Building rbenv Add rbenv to your PATH and initialize it (place this inside your .bashrc or .zshrc etc): export PATH="$HOME/.rbenv/bin:$PATH" export PATH="$HOME/.rbenv/shims:$PATH" export RUBY_CONFIGURE_OPTS="--with-openssl-dir=/usr/local" eval "$(rbenv init -)" Then reload your shell (zsh in this example): source ~/.zshrc Next we will need to install ruby-build as a rbenv plugin. Clone the ruby-build repository into the rbenv plugins directory: git clone https://github.com/rbenv/ruby-build.git ~/.rbenv/plugins/ruby-build Installing Ruby and Setting Our Version Now use rbenv to install the desired version of Ruby (we will get an older version for this example): rbenv install 3.3.0 If you run into issues, you may need to specify your openssl directory: RUBY_CONFIGURE_OPTS="--with-openssl-dir=/usr/local" rbenv install 3.3.0 If you’re on a slower machine (like mine) this might take a little bit. Just grab a coffee or a snack while you wait! Then navigate to your project of choice and set the local Ruby version: rbenv local 3.3.0 That’s it! If you’d prefer to set this version of Ruby for all projects going forward, simply replace local with global.