Full Width [alt+shift+f] Shortcuts [alt+shift+k]
Sign Up [alt+shift+s] Log In [alt+shift+l]
11
If you want to build a home server, it may be advised to actually use server-grade components. I documented the reasons for choosing server-grade hardware already in an earlier post on this topic. It is recommended to read the old post first. In this new post, I only show new hardware that could also be chosen as a more modern hardware option. My original post dates back to December 2013 and centers around the popular X9SCM-F which is based on the LGA 1155 socket. Please note that the X9SCM-F / LGA 1155 based solution may be cheaper if you want the Xeon processor. So I'd like to introduce two Supermicro motherboards that may be of interest. Supermicro X10SLL-F Some key features are: 2 x Gigabit NIC on-board 6 onboard SATA ports 3 x PCIe (2 x 8x + 1 x 4x) Costs $169 or €160 This board is one of the cheapest Supermicro boards you can get and it has 3 x PCI-e, which may be of interest if you need to install extra HBA's or RAID cards, SAS expanders and/or network controllers....
over a year ago

Improve your reading experience

Logged in users get linked directly to articles resulting in a better reading experience. Please login for free, it takes less than 1 minute.

More from Louwrentius

Bose SoundLink on-ear headphones battery replacement

Skip to the bottom two paragraph for instructions on how to replace the battery. I bought my Bose SoundLink on-ear Bluetooth headphones for 250 Euros around 2017 and I really like them. They are small, light, comfortable and can easily fit in a coat pocket when folded. Up until now (about 7 years later) I have replaced the ear cushions in 2019 (€25) and 2024 (€18). Early 2025, battery capacity had deteriorated to a point where it became noticeable. The battery was clearly dying. Unfortunately these headphones aren't designed for easy battery replacement: Bose hasn't published instructions on how to replace the battery, doesn't offer a replacement battery and hasn't documented which battery type/model is used. The left 'head phone' has two Torx security screws and most people won't have the appropriate screwdriver for this size There is soldering involved I wanted to try a battery replacement anyway as I hate to throw away a perfectly good, working product just because the battery has worn out. Maybe at some point the headband needs replacing, but with a fresh battery, these headphones can last another 7 years. Let's prevent a bit of e-waste with a little bit of cost and effort. Most of all, the cost of this battery replacement is much lower than a new pair of headphones as the battery was €18 including taxes and shipping. Right to repair should include easy battery replacement Although my repair seemed to have worked out fine, it requires enough effort that most people won't even try. For this reason, I feel that it should be mandatory by law that: Batteries in any product must be user-replaceable (no special equipment or soldering required) Batteries must be provided by the vendor until 10 years after the last day the product was sold (unless it's a standard format like AA(A) or 18650). Batteries must be provided at max 10% of the cost of the original product The penalty for non-compliance should be high enough such that it won't be regarded as the cost of doing business For that matter, all components that may wear down over time should be user-replaceable. What you need to replace the battery Buy the exact battery type: ahb571935pct-01 (350mAh) (notice the three wires!) A Philips #0 screwdriver / bit A Torx T6H security screwdriver / bit (iFixit kits have them) A soldering iron Solder Heat shrink for 'very thin wire' Multimeter (optional) a bit of tape to 'cap off' bare battery leads Please note that I found another battery ahb571935pct-03 with similar specifications (capacity and voltage) but I don't know if it will fit. Putting the headphone ear cushion back on can actually be the hardest part of the process, you need to be firm and this process is documented by Bose. Battery replacement steps I took Make sure you don't short the wires on the old or new battery during replacement The battery is located in the left 'head phone'. Use a multimeter to check if your new battery isn't dead (should be 3+ volt) Remove the ear cushion from the left 'head phone' very gently as not to tear the rim Remove the two philips screws that keep the driver (speaker) in place Remove the two Torx screws (you may have to press a bit harder) Remove the speaker and be carefull not to snap the wire Gently remove the battery from the 'head phone' Cut the wires close to the old battery (one by one!) and cover the wires on the battery to prevent a short Strip the three wires from the headphones a tiny bit (just a few mm) Put a short piece of heat shrink on each of the three wires of the battery Solder each wire to the correct wire in the ear cup Adjust the location of the heat shrink over the freshly soldered joint. Use the soldering iron close to the heat shrink to shrink it (don't touch anything), this can take some time, be patient Check that the heat shrink is fixed in place and can't move Put the battery into it's specific location in the back of the 'head phone' Test the headphones briefly before reassembling the headphones Reassemble the 'head phone' (consider leaving out the two Torx screws) Dispose of the old battery in a responsible manner

a week ago 9 votes
My 71 TiB ZFS NAS after 10 years and zero drive failures

My 4U 71 TiB ZFS NAS built with twenty-four 4 TB drives is over 10 years old and still going strong. Although now on its second motherboard and power supply, the system has yet to experience a single drive failure (knock on wood). Zero drive failures in ten years, how is that possible? Let's talk about the drives first The 4 TB HGST drives have roughly 6000 hours on them after ten years. You might think something's off and you'd be right. That's only about 250 days worth of runtime. And therein lies the secret of drive longevity (I think): Turn the server off when you're not using it. According to people on Hacker News I have my bearings wrong. The chance of having zero drive failures over 10 years for 24 drives is much higher than I thought it was. So this good result may not be related to turning my NAS off and keeping it off most off the time. My NAS is turned off by default. I only turn it on (remotely) when I need to use it. I use a script to turn the IoT power bar on and once the BMC (Baseboard Management Controller) is done booting, I use IPMI to turn on the NAS itself. But I could have used Wake-on-Lan too as an alternative. Once I'm done using the server, I run a small script that turns the server off, wait a few seconds and then turn the wall socket off. It wasn't enough for me to just turn off the server, but leave the motherboard, and thus the BMC powered, because that's just a constant 7 watts (about two Raspberry Pis at idle) being wasted (24/7). This process works for me because I run other services on low-power devices such as Raspberry Pi4s or servers that use much less power when idling than my 'big' NAS. This proces reduces my energy bill considerably (primary motivation) and also seems great for hard drive longevity. Although zero drive failures to date is awesome, N=24 is not very representative and I could just be very lucky. Yet, it was the same story with the predecessor of this NAS, a machine with 20 drives (1 TB Samsung Spinpoint F1s (remember those?)) and I also had zero drive failures during its operational lifespan (~5 years). The motherboard (died once) Although the drives are still ok, I had to replace the motherboard a few years ago. The failure mode of the motherboard was interesting: it was impossible to get into the BIOS and it would occasionally fail to boot. I tried the obvious like removing the CMOS battery and such but to no avail. Fortunately, the [motherboard]1 was still available on Ebay for a decent price so that ended up not being a big deal. ZFS ZFS worked fine for all these years. I've switched operating systems over the years and I never had an issue importing the pool back into the new OS install. If I would build a new storage server, I would definitely use ZFS again. I run a zpool scrub on the drives a few times a year2. The scrub has never found a single checksum error. I must have run so many scrubs, more than a petabyte of data must have been read from the drives (all drives combined) and ZFS didn't have to kick in. I'm not surprised by this result at all. Drives tend to fail most often in two modes: Total failure, drive isn't even detected Bad sectors (read or write failures) There is a third failure mode, but it's extremely rare: silent data corruption. Silent data corruption is 'silent' because a disk isn't aware it delivered corrupted data. Or the SATA connection didn't detect any checksum errors. However, due to all the low-level checksumming, this risk is extremely small. It's a real risk, don't get me wrong, but it's a small risk. To me, it's a risk you mostly care about at scale, in datacenters4 but for residential usage, it's totally reasonable to accept the risk3. But ZFS is not that difficult to learn and if you are well-versed in Linux or FreeBSD, it's absolutely worth checking out. Just remember! Sound levels (It's Oh So Quiet) This NAS is very quiet for a NAS (video with audio). But to get there, I had to do some work. The chassis contains three sturdy 12V fans that cool the 24 drive cages. These fans are extremely loud if they run at their default speed. But because they are so beefy, they are fairly quiet when they run at idle RPM5, yet they still provide enough airflow, most of the time. But running at idle speeds was not enough as the drives would heat up eventually, especially when they are being read from / written to. Fortunately, the particular Supermicro motherboard I bought at the time allows all fan headers to be controlled through Linux. So I decided to create a script that sets the fan speed according to the temperature of the hottest drive in the chassis. I actually visited a math-related subreddit and asked for an algorithm that would best fit my need to create a silent setup and also keep the drives cool. Somebody recommended to use a "PID controller", which I knew nothing about. So I wrote some Python, stole some example Python PID controller code, and tweaked the parameters to find a balance between sound and cooling performance. The script has worked very well over the years and kept the drives at 40C or below. PID controllers are awesome and I feel it should be used in much more equipment that controls fans, temperature, and so on, instead of 'dumb' on/of behaviour or less 'dumb' lookup tables. Networking I started out with quad-port gigabit network controllers and I used network bonding to get around 450 MB/s network transfer speeds between various systems. This setup required a ton of UTP cables so eventually I got bored with that and I bought some cheap Infiniband cards and that worked fine, I could reach around 700 MB/s between systems. As I decided to move away from Ubuntu and back to Debian, I faced a problem: the Infiniband cards didn't work anymore and I could not figure out how to fix it. So I decided to buy some second-hand 10Gbit Ethernet cards and those work totally fine to this day. The dead power supply When you turn this system on, all drives spin up at once (no staggered spinup) and that draws around 600W for a few seconds. I remember that the power supply was rated for 750W and the 12 volt rail would have been able to deliver enough power, but it would sometimes cut out at boot nonetheless. UPS (or lack thereof) For many years, I used a beefy UPS with the system, to protect against power failure, just to be able to shutdown cleanly during an outage. This worked fine, but I noticed that the UPS used another 10+ watts on top of the usage of the server and I decided it had to go. Losing the system due to power shenanigans is a risk I accept. Backups (or a lack thereof) My most important data is backed up trice. But a lot of data stored on this server isn't important enough for me to backup. I rely on replacement hardware and ZFS protecting against data loss due to drive failure. And if that's not enough, I'm out of luck. I've accepted that risk for 10 years. Maybe one day my luck will run out, but until then, I enjoy what I have. Future storage plans (or lack thereof) To be frank, I don't have any. I built this server back in the day because I didn't want to shuffle data around due to storage space constraints and I still have ample space left. I have a spare motherboard, CPU, Memory and a spare HBA card so I'm quite likely able to revive the system if something breaks. As hard drive sizes have increased tremendously, I may eventually move away from the 24-drive bay chassis into a smaller form-factor. It's possible to create the same amount of redundant storage space with only 6-8 hard drives with RAIDZ2 (RAID 6) redundancy. Yet, storage is always expensive. But another likely scenario is that in the coming years this system eventually dies and I decide not to replace it at all, and my storage hobby will come to an end. I needed the same board, because the server uses four PCIe slots: 3 x HBA and 1 x 10Gbit NIC. ↩ It takes ~20 hours to complete a scrub and it uses a ton of power while doing so. As I'm on a dynamic power tariff, I run it on 'cheap' days. ↩ every time I listen to ZFS enthusiasts you get the impression you are taking insane risks with your data if you don't run ZFS. I disagree, it all depends on context and circumstances. ↩ enterprise hard drives used in servers and SANs had larger sector sizes to accommodate even more checksumming data to prevent against silent data corruption. ↩ Because there is little airflow by default, I had to add a fan to cool the four PCIe cards (HBA and networking) or they would have gotten way too hot. ↩

5 months ago 14 votes
The Raspberry Pi 5 is no match for a tini-mini-micro PC

I've always been fond of the idea of the Raspberry Pi. An energy efficient, small, cheap but capable computer. An ideal home server. Until the Pi 4, the Pi was not that capable, and only with the relatively recent Pi 5 (fall 2023) do I feel the Pi is OK performance wise, although still hampered by SD card performance1. And the Pi isn't that cheap either. The Pi 5 can be fitted with an NVME SSD, but for me it's too little, too late. Because I feel there is a type of computer on the market, that is much more compelling than the Pi. I'm talking about the tinyminimicro home lab 'revolution' started by servethehome.com about four years ago (2020). A 1L mini PC (Elitedesk 705 G4) with a Raspberry Pi 5 on top During the pandemic, the Raspberry Pi was in short supply and people started looking for alternatives. The people at servethehome realised that these small enterprise desktop PCs could be a good option. Dell (micro), Lenovo (tiny) and HP (mini) all make these small desktop PCs, which are also known as 1L (one liter) PCs. These Mini PC are not cheap2 when bought new, but older models are sold at a very steep discount as enterprises offload old models by the thousands on the second hand market (through intermediates). Although these computers are often several years old, they are still much faster than a Raspberry Pi (including the Pi 5) and can hold more RAM. I decided to buy two HP Elitedesk Mini PCs to try them out, one based on AMD and the other based on Intel. The Hardware Elitedesk Mini G3 800 Elitedesk Mini G4 705 CPU Intel i5-6500 (65W) AMD Ryzen 3 PRO 2200GE (35W) RAM 16 GB (max 32 GB) 16 GB (max 32 GB) HDD 250 GB (SSD) 250 GB (NVME) Network 1Gb (Intel) 1Gb (Realtek) WiFi Not installed Not installed Display 2 x DP, 1 x VGA 3 x DP Remote management Yes No Idle power 4 W 10 W Price €160 €115 The AMD-based system is cheaper, but you 'pay' in higher idle power usage. In absolute terms 10 watt is still decent, but the Intel model directly competes with the Pi 5 on idle power consumption. Elitedesk 705 left, Elitedesk 800 right (click to enlarge) Regarding display output, these devices have two fixed displayport outputs, but there is one port that is configurable. It can be displayport, VGA or HDMI. Depending on the supplier you may be able to configure this option, or you can buy them separately for €15-€25 online. Click on image for official specs in PDF format Both models seem to be equipped with socketed CPUs. Although options for this formfactor are limited, it's possible to upgrade. Comparing cost with the Pi 5 The Raspberry Pi 5 with (max) 8 GB of RAM costs ~91 Euro, almost exactly the same price as the AMD-based mini PC3 in its base configuration (8GB RAM). Yet, with the Pi, you still need: power supply (€13) case (€11) SD card or NVME SSD (€10-€45) NVME hat (€15) (optional but would be more comparable) It's true that I'm comparing a new computer to a second hand device, and you can decide if that matters in this case. With a complete Pi 5 at around €160 including taxes and shipping, the AMD-based 1L PC is clearly the cheaper and still more capable option. Comparing performance with the Pi 5 The first two rows in this table show the Geekbench 6 score of the Intel and AMD mini PCs I've bought for evaluation. I've added the benchmark results of some other computers I've access to, just to provide some context. CPU Single-core Multi-core AMD Ryzen 3 PRO 2200GE (32W) 1148 3343 Intel i5-6500 (65W) 1307 3702 Mac Mini M2 2677 9984 Mac Mini i3-8100B 1250 3824 HP Microserver Gen8 Xeon E3-1200v2 744 2595 Raspberry Pi 5 806 1861 Intel i9-13900k 2938 21413 Intel E5-2680 v2 558 5859 Sure, these mini PCs won't come close to modern hardware like the Apple M2 or the intel i9. But if we look at the performance of the mini PCs we can observe that: The Intel i5-6500T CPU is 13% faster in single-core than the AMD Ryzen 3 PRO Both the Intel and AMD processors are 42% - 62% faster than the Pi 5 regarding single-core performance. Storage (performance) If there's one thing that really holds the Pi back, it's the SD card storage. If you buy a decent SD card (A1/A2) that doesn't have terrible random IOPs performance, you realise that you can get a SATA or NVME SSD for almost the same price that has more capacity and much better (random) IO performance. With the Pi 5, NVME SSD storage isn't standard and requires an extra hat. I feel that the missing integrated NVME storage option for the Pi 5 is a missed opportunity that - in my view - hurts the Pi 5. Now in contrast, the Intel-based mini PC came with a SATA SSD in a special mounting bracket. That bracket also contained a small fan(1) to keep the underlying NVME storage (not present) cooled. There is a fan under the SATA SSD (click to enlarge) The AMD-based mini PC was equipped with an NVME SSD and was not equipped with the SSD mounting bracket. The low price must come from somewhere... However, both systems have support for SATA SSD storage, an 80mm NVME SSD and a small 2230 slot for a WiFi card. There seems no room on the 705 G4 to put in a small SSD, but there are adapters available that convert the WiFi slot to a slot usable for an extra NVME SSD, which might be an option for the 800 G3. Noice levels (subjective) Both systems are barely audible at idle, but you will notice them (if you sensitive to that sort of thing). The AMD system seems to become quite loud under full load. The Intel system also became loud under full load, but much more like a Mac Mini: the noise is less loud and more tolerable in my view. Idle power consumption Elitedesk 800 (Intel) I can get the Intel-based Elitedesk 800 G3 to 3.5 watt at idle. Let that sink in for a moment. That's about the same power draw as the Raspberry Pi 5 at idle! Just installing Debian 12 instead of Windows 10 makes the idle power consumption drop from 10-11 watt to around 7 watt. Then on Debian, you: run apt install powertop run powertop --auto-tune (saves ~2 Watt) Unplug the monitor (run headless) (saves ~1 Watt) You have to put the powertop --auto-tune command in /etc/rc.local: #!/usr/bin/env bash powertop --auto-tune exit 0 Then apply chmod +x /etc/rc.local So, for about the same idle power draw you get so much more performance, and go beyond the max 8GB RAM of the Pi 5. Elitedesk 705 (AMD) I managed to get this system to 10-11 watt at idle, but it was a pain to get there. I measured around 11 Watts idle power consumption running a preinstalled Windows 11 (with monitor connected). After installing Debian 12 the system used 18 Watts at idle and so began a journey of many hours trying to solve this problem. The culprit is the integrated Radeon Vega GPU. To solve the problem you have to: Configure the 'bios' to only use UEFI Reinstall Debian 12 using UEFI install the appropriate firmware with apt install firmware-amd-graphics If you boot the computer using legacy 'bios' mode, the AMD Radeon firmware won't load no matter what you try. You can see this by issuing the commands: rmmod amdgpu modprobe amdgpu You may notice errors on the physical console or in the logs that the GPU driver isn't loaded because it's missing firmware (a lie). This whole process got me to around 12 Watt at idle. To get to ~10 Watts idle you need to do also run powertop --auto-tune and disconnect the monitor, as stated in the 'Intel' section earlier. Given the whole picture, 10-11 Watt at idle is perfectly okay for a home server, and if you just want the cheapest option possible, this is still a fine system. KVM Virtualisation I'm running vanilla KVM (Debian 12) on these Mini PCs and it works totally fine. I've created multiple virtual machines without issue and performance seemed perfectly adequate. Boot performance From the moment I pressed the power button to SSH connecting, it took 17 seconds for the Elitedesk 800. The Elitedesk 705 took 33 seconds until I got an SSH shell. These boot times include the 5 second boot delay within the GRUB bootloader screen that is default for Debian 12. Remote management support Some of you may be familiar with IPMI (ILO, DRAC, and so on) which is standard on most servers. But there is also similar technology for (enterprise) desktops. Intel AMT/ME is a technology used for remote out-of-band management of computers. It can be an interesting feature in a homelab environment but I have no need for it. If you want to try it, you can follow this guide. For most people, it may be best to disable the AMT/ME feature as it has a history of security vulnerabilities. This may not be a huge issue within a trusted home network, but you have been warned. The AMD-based Elitedesk 705 didn't came with equivalent remote management capabilities as far as I can tell. Alternatives The models discussed here are older models that are selected for a particular price point. Newer models from Lenovo, HP and Dell, equip more modern processors which are faster and have more cores. They are often also priced significantly higher. If you are looking for low-power small formfactor PCs with more potent or customisable hardware, you may want to look at second-hand NUC formfactor PCs. Stacking multiple mini PCs The AMD-based Elitedesk 705 G4 is closed at the top and it's possible to stack other mini PCs on top. The Intel-based Elitedesk 800 G3 has a perforated top enclosure, and putting another mini pc on top might suffocate the CPU fan. As you can see, the bottom/foot of the mini PC doubles as a VESA mount and has four screw holes. By putting some screws in those holes, you may effectively create standoffs that gives the machine below enough space to breathe (maybe you can use actual standoffs). Evaluation and conclusion I think these second-hand 1L tinyminimicro PCs are better suited to play the role of home (lab) server than the Raspberry Pi (5). The increased CPU performance, the built-in SSD/NVME support, the option to go beyond 8 GB of RAM (up to 32GB) and the price point on the second-hand market really makes a difference. I love the Raspberry Pi and I still have a ton of Pi 4s. This solar-powered blog is hosted on a Pi 4 because of the low power consumption and the availability of GPIO pins for the solar status display. That said, unless the Raspberry Pi becomes a lot cheaper (and more potent), I'm not so sure it's such a compelling home server. This blog post featured on the front page of Hacker News. even a decent quality SD card is no match (in terms of random IOPs and sequential throughput) for a regular SATA or NVME SSD. The fact that the Pi 5 has no on-board NVME support is a huge shortcomming in my view. ↩ in the sense that you can buy a ton of fully decked out Pi 5s for the price of one such system. ↩ The base price included the external power brick and 256GB NVME storage. ↩

8 months ago 11 votes
AI is critically important but not for you

Before Chat-GPT caused a sensation, big tech companies like Facebook and Apple were betting their future growth on virtual reality. But I'm convinced that virtual reality will never be a mainstream thing. If you ever used VR you know why: A heavy thing on your head that messes up your hair Nausea The focus on virtual reality felt like desperation to me. The desperation of big tech companies trying to find new growth, ideally a monopoly they control1, to satisfy the demands of shareholders. And then OpenAI dropped ChatGPT and all the big tech companies started to pivot so fast because in contrary to VR, AI doesn't involve making people nauseated and look silly. It's probably obvious that I feel it's not about AI itself. It is really about huge tech companies that have found a new way to sustain growth a bit longer, now that all other markets have been saturated. Flush with cash, they went nuts and bought up all the AI accelerator hardware2, which in turn uses unspeakable amounts of energy to train new large language models. Despite all the hype, current AI technology is at it's core a very sophisticated statistical model. It's all about probabilities, it can't actually reason. As I see it, work done by AI can't thus be trusted. Depending on the specific application, that may be less of an issue, but that is a fundamental limitation of current technology. And this gives me pause as it limits the application where it is most wanted: to control labour. To reduce the cost of headcount and to suppress wages. As AI tools become capable enough, it would be irresponsible towards shareholders not to pursue this direction. All this just to illustrate that the real value of AI is not for the average person in the street. The true value is for those bigger companies who can keep on growing, and the rest is just collateral damage. But I wonder: when the AI hype is over, what new hype will take it's place? I can't see it. I can't think of it. But I recognise that the internet created efficiencies that are convenient, yet social media weaponised this convenience to exploit our fundamental human weaknesses. As shareholder value rose, social media slowly chips away at the fabric of our society: trust. I've sold my Oculus Rift CV1 long ago, I lost hundreds of dollars of content but I refuse to create a Facebook/Meta account. ↩ climate change accelerators ↩

9 months ago 11 votes
How to run victron veconfigure on a mac

Introduction Victron Multiplus-II inverter/charges are configured with the veconfigure1 tool. Unforntunately this is a Windows-only tool, but there is still a way for Apple users to run this tool without any problems. Tip: if you've never worked with the Terminal app on MacOS, it might not be an easy process, but I've done my best to make it as simple as I can. A tool called 'Wine' makes it possible to run Windows applications on MacOS. There are some caveats, but none of those apply to veconfigure, this tool runs great! I won't cover in this tutorial how to make the MK-3 USB cable work. This tutorial is only meant for people who have a Cerbo GX or similar device, or run VenusOS, which can be used to remotely configure the Multipluss device(s). Step 1: install brew on macos Brew is a tool that can install additional software Visit https://brew.sh and copy the install command open the Terminal app on your mac and paste the command now press 'Enter' or return It can take a few minutes for 'brew' to install. Step 2: install wine Enter the following two commands in the terminal: brew tap homebrew/cask-versions brew install --cask --no-quarantine wine-stable Download Victron veconfigure Visit this page Scroll to the section "VE Configuration tools for VE.Bus Products" Click on the link "Ve Configuration Tools" You'll be asked if it's OK to download this file (VECSetup_B.exe) which is ok Start the veconfigure installer with wine Open a terminal window Run cd Enter the command wine Downloads\VECSetup_B.exe Observe that the veconfigure Windows setup installer starts Click on next, next, install and Finish veconfigure will run for the first time Click on the top left button on the video to enlarge These are the actual install steps: How to start veconfigure after you close the app Open a terminal window Run cd Run cd .wine/drive_c/Program\ Files\ \(x86\)/VE\ Configure\ tools/ Run wine VEConfig.exe Observe that veconfigure starts Allow veconfigure access to files in your Mac Download folder Open a terminal window Run cd run cd .wine/drive_c/ run ls -n ~/Downloads We just made the Downloads directory on your Mac accessible for the vedirect software. If you put the .RSVC files in the Downloads folder, you can edit them. Please follow the instructions for remote configuration of the Multiplus II. Click on the "Ve Configuration Tools" link in the "VE Configuration tools for VE.Bus Products" section. ↩

a year ago 17 votes

More in technology

Apple’s new iPads are here, let’s break them down

Another day, another opportunity to rate my 2025 Apple predictions! iPad Here’s what I predicted would happen with the base iPad this year: I fully expect to see the 11th gen iPad in 2025, and I think it will come with a jump to the A17 Pro or

4 hours ago 2 votes
A lightweight file server running entirely on an Arduino Nano ESP32

Home file servers can be very useful for people who work across multiple devices and want easy access to their documents. And there are a lot of DIY build guides out there. But most of them are full-fledged NAS (network-attached storage) devices and they tend to rely on single-board computers. Those take a long time […] The post A lightweight file server running entirely on an Arduino Nano ESP32 appeared first on Arduino Blog.

8 hours ago 2 votes
The New Leverage: AI and the Power of Small Teams

This weekend, a small team in Latvia won an Oscar for a film they made using free software. That’s not just cool — it’s a sign of what’s coming. Sunday night was family movie night in my home. We picked a recent movie, FLOW. I’d heard good things about it and thought we’d enjoy it. What we didn’t know was that as we watched, the film won this year’s Academy Award as best animated feature. Afterwards, I saw this post from the movie’s director, Gints Zilbalodis: We established Dream Well Studio in Latvia for Flow. This room is the whole studio. Usually about 4-5 people were working at the same time including me. I was quite anxious about being in charge of a team, never having worked in any other studios before, but it worked out. pic.twitter.com/g39D6YxVWa — Gints Zilbalodis (@gintszilbalodis) January 26, 2025 Let that sink in: 4-5 people in a small room in Latvia led by a relatively inexperienced director used free software to make a movie that as of February 2025 had earned $20m and won an Oscar. I know it’s a bit more involved than that, but still – quite an accomplishment! But not unique. Billie Eilish and her brother Phineas produced her Grammy-winning debut album When We All Fall Asleep, Where Do We Go? in their home studio. And it’s not just cultural works such as movies and albums: small teams have built hugely successful products such as WhatsApp and Instagram. As computers and software get cheaper and more powerful, people can do more with less. And “more” here doesn’t mean just a bit better (pardon the pun) – it means among the world’s best. And as services and products continue migrating from the world of atoms to the world of bits, creators’ scope of action grows. This trend isn’t new. But with AI in the mix, things are about to go into overdrive. Zilbalodis and his collaborators could produce their film because someone else built Blender; they worked within its capabilities and constraints. But what if their vision exceeded what the software can do? Just a few years ago, the question likely wouldn’t even come up. Developing software calls for different abilities. Until recently, a small team had to choose: either make the movie or build the tools. AI changes that, since it enables small teams to “hire” virtual software developers. Of course, this principle extends beyond movies: anything that can be represented symbolically is in scope. And it’s not just creative abilities, such as writing, playing music, or drawing, but also more other business functions such as scheduling, legal consultations, financial transactions, etc. We’re not there yet. But if trends hold, we’ll soon see agent-driven systems do for other kinds of businesses what Blender did for Dream Well Studio. Have you dreamed of making a niche digital product to scratch an itch? That’s possible now. Soon, you’ll be able to build a business around it quickly, easily, and without needing lots of other humans in the mix. Many people have lost their jobs over the last three years. Those jobs likely won’t be replaced with AIs soon. But job markets aren’t on track to stability. If anything, they’re getting weirder. While it’s early days, AI promises some degree of resiliency. For people with entrepreneurial drive, it’s an exciting time: we can take ideas from vision to execution faster, cheaper, and at greater scale than ever. For others, it’ll be unsettling – or outright scary. We’re about to see a major shift in who can create, innovate, and compete in the market. The next big thing might not come from a giant company, but from a small team – or even an individual – using AI-powered tools. I expect an entrepreneurial surge driven by necessity and opportunity. How will you adapt?

13 hours ago 1 votes
So much time and money for a minor vibe shift

Gary Marcus: Hot Take: GPT 4.5 Is a Nothing Burger Half a trillion dollars later, there is still no viable business model, profits are modest at best for everyone except Nvidia and some consulting forms, there’s still basically no moat, and still no GPT-5. Any reasonable person

an hour ago 1 votes
This vending machine draws generative art for just a euro

If you hear the term “generative art” today, you probably subconsciously add “AI” to the beginning without even thinking about it. But generative art techniques existed long before modern AI came along — they even predate digital computing altogether. Despite that long history, generative art remains interesting as consumers attempt to identify patterns in the […] The post This vending machine draws generative art for just a euro appeared first on Arduino Blog.

yesterday 2 votes