I recently completed my VORON 0 build and I was determined to leave it as-is for a while and to start modding my VORON Trident… So before embarking om my larger Trident modding journey I decided to work on the VORON 0 just a little bit more. HEPA filter With the Nevermore Micro V4 I had active carbon filtering but I also wanted a HEPA filter that would also provide negative air pressure to the printer. I found the Hepa filter by JNP for the VORON 0.1 and a mount for the VORON 0.2 that I installed. For the fans I used two Noctua NF-A4x10 FLX fans and I spliced them together with the Nevermore filter, allowing the MCU to control all the filter fans together. It might have been better to buy the 5V versions and connect them to the 5V output to have them always on, but by then I had already ordered the other version. Oh well. Back meshed panel The small 5V fan for the Raspberry Pi was super loud and I wanted to replace it with something. Because the Raspberry Pi Zero doesn’t get that hot I removed the fan and replaced the back panel with a meshed variant, which I hope should provide enough airflow to keep the electronics cool. (There are other variants with integrated fans if I realize this wasn’t enough.) Modesty mesh The wiring is super ugly and I stumbled upon the modesty mesh that hides the wires well from the sides. Not at all necessary but they make the printer a little prettier. Full size panels One thing that bothered me with the stock VORON 0.2 was the gaps between the tophat and the side panels and front door. I went looking for a mod with fill-sized panels and found the ZeroPanels mod. Instead of magnets the printed parts clips into the extrusions pretty hard while still allowing you to pull them off when you want to. It works really well honestly. The clips were slightly difficult to print but manageable. I was looking at the BoxZero mod for a proper full-sized panels mod but I didn’t want to tear apart the printer and rebuild the belt path so I simply replaced the stock panels with full sized ones. This does leave some air gaps at the back and front of the printer right next to the belt that I simply covered with some tape: Some tape to cover the gaps around the belts. While the clips are good for panels you don’t remove that often, they’re too much to use for the front door. They have some magnetic clips you can use but I’m honestly perplexed on how to use them for good effect. The standard VORON 0 handles don’t consider the extra 3mm the foam tape adds, leaving a gap that severely reduces the pulling force of the magnets. Similarly the magnet clips included in ZeroPanels surprisingly have the same issue. For the door handle I used the stealth handle found in the Voron 0.2 fullsize ZeroPanel mod that does take the foam tape into consideration. Three different magnet holders; at the top the Stealth handles holders that come out 3mm, in the middle the 6mm holder, and at the bottom the standard magnet holder. There’s a variant of the clips for 6mm magnets in the pull requests that I used by pushing in two 3x2mm magnets and super gluing one 10x3mm magnet on top, so it sticks out the 3mm extra distance the foam tape adds. (Yes, maybe just the 10x3mm magnet would be enough). For the outside I used the standard ZeroPanels holders for 10x3mm magnets, allowing the magnets close really tightly against each other. Extra magnets at the top of the printer to get a proper seal. The panels I bought were just slightly too wide causing the side panels to bend a little and it made it hard to get a close seal for front and side panels. I had to file down the clips on the front door to avoid them from colliding with the side panel clips, and I had to add extra clips and magnets for the panels to close tightly against the foam tape.

I recently came upon a horror story where a developer was forced to switch editor from Neovim to Cursor and I felt I had to write a little to cleanse myself of the disgust I felt. Two different ways of approaching an editor I think that there’s two opposing ways of thinking about the tool that is an editor: Refuse to personalize anything and only use the basic features “An editor is a simple tool I use to get the job done.” Get stuck in configuration hell and spend tons of time tweaking minor things “An editor is a highly personalized tool that works the way I want.” These are the extreme ends of the spectrum to make a point and most developers will fall somewhere in between. It’s not a static proposition; I’ve had periods in my life where I’ve used the same Vim configuration for years and other times I’ve spent more time rewriting my Neovim config than doing useful things. I don’t differentiate between text editors and IDEs as I don’t find the distinction very meaningful. They’re all just editors. Freedom of choice is important Freedom of choice is more to be treasured than any possession earth can give. David O. McKay Some developers want zero configuration while others want to configure their editor so it’s just right. Either way is fine and I’ve met excellent developers from both sides. But removing the power of choice is a horrible idea as you’re forcing developers to work in a way they’re not comfortable with, not productive with, or simply don’t like. You’re bound to make some of the developers miserable or see them leave (usually the best ones who can easily find another job). To explain how important an editor might be to some people, I give you this story about Stephen Hendry—one of the most successful Snooker players ever—and how important his cue was to him: In all the years I’ve been playing I’ve never considered changing my cue. It was the first cue I ever bought, aged 13, picked from a cabinet in a Dunfermline snooker centre just because I liked the Rex Williams signature on it. I saved £40 to buy it. It’s a cheap bit of wood and it’s been the butt of other players’ jokes for ages. Alex Higgins said it was ‘only good for holdin’ up f*g tomatoes!’ But I insist on sticking with it. And I’ve won a lot of silverware, including seven World Championship trophies, with it. It’s a one-piece which I carry in a wooden, leather-bound case that’s much more expensive than the cue it houses. But in 2003, at Glasgow airport after a flight from Bangkok, it emerges through the rubber flaps on the carousel and even at twenty yards I can see that both case and cue are broken. Snapped almost clean in two, the whole thing now resembling some form of shepherd’s crook. The cue comes to where I’m standing, and I pick it up, the broken end dangling down forlornly. I could weep. Instead, I laugh. ‘Well,’ I say to my stunned-looking friend John, ‘that’s my career over.’ Stephen Hendry, The Mirror Small improvements leads to large long-term gains Kaizen isn’t about massive overhauls or overnight success. Instead, it focuses on small, continuous improvements that add up to significant long-term gains. What is Kaizen? A Guide to Continuous Improvement I firmly believe that even small improvements are worth it as they add up over time (also see compound interest and how it relates to financial investments). An editor is a great example where even small improvements may have a big effect for the simple reason that you spend so much time in your editor. I’ve spent hours almost every day inside (neo)vim since I started using it 15+ years ago. Even simple things like quickly changing text inside brackets (ci[) instead of selecting text with your mouse might save hundreds of hours during a programming career—and that’s just one example. Naturally, as a developer you can find small but worthwhile improvements in other areas too, for instance: Learning the programming languages and libraries you use a little better Customizing your keyboard and keyboard layout This is more for comfort and health than speed but that makes it even more important, not less. Increasing your typing speed Some people dismiss typing speed as they say they’re limited by their thinking, not typing. But the benefit of typing faster (and more fluidly) isn’t really the overall time spent typing vs thinking; it’s so you can continue thinking with as little interruption as possible. On some level you want to reduce the time typing in this chain: think… edit, think… edit, think… It’s also why the Vim way of editing is so good—it’s based on making small edits and to return quickly to normal (thinking) mode. Some people ask how can you afford to spend time practicing Vim commands or to configure your editor as it takes away time from work? But I ask you: with a programming career of several decades and tens of thousands of hours to spend in front of your computer, how can you afford not to? Neovim is versatile During the years I’ve done different things: Switched keyboard and keyboard layout multiple times. Been blogging and wrote a book. The one constant through all of this has been Neovim. Neovim may not have the best language specific integrations but it does everything well and the benefit of having the same setup for everything you do is not to be underestimated. It pairs nicely with the idea of adding up small improvements over time; every small improvement that I add to my Neovim workflow will stay with me no matter what I work with. I did use Emacs at work for years because their proprietary language only had an Emacs integration and I didn’t have the time nor energy to create one for Neovim. While Evil made the experience survivable I realized then that I absolutely hate having my work setup be different from my setup at home. People weren’t overjoyed with being unable to choose their own editor and I’ve heard rumors that there’s now an extension for Visual Studio. Neovim is easily extensible Neovim: a Personalized Development Environment TJ DeVries A different take on editing code I’ve always felt that Vimscript is the worst part of Vim. Maybe that’s a weird statement as the scriptability of Vim is one if it’s strengths; and to be fair, simple things are very nice: nnoremap j gj set expandtab But writing complex things in Vimscript is simply not a great experience. One of the major benefits of Neovim is the addition of Lua as a first-class scripting language. Yes, Lua isn’t perfect and it’s often too verbose but it’s so much better than Vimscript. Lua is the main reason that the Neovim plugin ecosystem is currently a lot more vibrant than in Vim. Making it easier to write plugins is of course a boon, but the real benefit is in how it makes it even easier to make more complex customization for yourself. Just plop down some Lua in the configuration files you already have and you’re done. (Emacs worked this out to an even greater extent decades ago.) One way I use this customizability is to help me when I’m blogging: Maybe you don’t need to create something this big but even small things such as disabling autoformat for certain file types in specific folders can be incredibly useful. Approachability should not be underestimated. While plugins in Lua is understandably the focus today, Neovim can still use plugins written in Vimscript and 99% of your old Vim configuration will still work in Neovim. Neovim won’t go anywhere The old is expected to stay longer than the young in proportion to their age. Nassim Nicholas Taleb, “Antifragile” The last big benefit with Neovim I’ll highlight—and why I feel fine with investing even more time into Neovim—is that Neovim will most likely continue to exist and thrive for years if not decades to come. While Vim has—after an impressive 30 years of development—recently entered maintenance mode, activity in Neovim has steadily increased since the fork from Vim more than a decade ago. The amount of high quality plugins, interest in Google trends, and GitHub activity have all been trending upwards. Neovim was also the most desired editor according to the latest Stackoverflow developer survey and the overall buzz and excitement in the community is at an all-time high. With the self-reinforced behavior and benefits of investing into a versatile and flexible editor with a huge plugin ecosystem such as Neovim I see no reason for the trend to taper off anytime soon. Neovim will probably never be as popular as something like VSCode but as an open source project backed by excited developers, Neovim will probably be around long after VSCode has been discontinued for The Next Big Thing.

I’ve been with Veronica for over a decade now and I think I’m starting to know her fairly well. Yet she still manages to surprise me. For instance, a couple of weeks ago she came and asked me about email security: I worry that my email password is too weak. Can you help me change email address and make it secure? It was completely unexpected—but I’m all for it. The action plan All heroic journeys needs a plan; here’s mine: .com surname was available). Migrate her email to Fastmail. Setup Bitwarden as a password manager. Use a YubiKey to secure the important services. Why a domain? If you ever want (or need) to change email providers it’s very nice to have your own domain. For instance, Veronica has a hotmail.com address but she can’t bring that with her if she moves to Fastmail. Worse, what if she gets locked out of her Outlook account for some reason? It might happen if you forget your password, someone breaks into your account, or even by accident. For example, Apple users recently got locked out of their Apple IDs without any apparent reason and Gmail has been notorious about locking out users for no reason. Some providers may be better but this is a systemic problem that can happen at any service. In almost all cases, your email is your key to the rest of your digital life. The email address is your username and to reset your password you use your email. If you lose access to your email you lose everything. When you control your domain, you can point the domain to a new email provider and continue with your life. Why pay for email? One of the first things Veronica told me when I proposed that she’d change providers was that she didn’t want to pay. It’s a common sentiment online that email must be cheap (or even free). I don’t think that email is the area where cost should be the most significant factor. As I argued for in why you should own your email’s domain, your email is your most important digital asset. If email is so important, why try to be cheap about it? You should spend your money on the important things and shouldn’t spend money on the unimportant things. Paying for email gives you a couple of nice things: Human support. It’s all too easy to get shafted by algorithms where you might get banned because you triggered some edge case (such as resetting your password outside your usual IP address). Ability to use your own domain. Having a custom domain is a paid feature at most email providers. A long-term viable business. How do you run an email company if you don’t charge for it? (You sell out your users or you close your business.) Why a password manager? The best thing you can do security wise is to adopt a password manager. Then you don’t have to try to remember dozens of passwords (leading to easy-to-remember and duplicate passwords) and can focus on remembering a single (stronger) password, confident that the password manager will remember all the rest. “Putting all your passwords in one basket” is a concern of course but I think the pros outweigh the cons. Why a YubiKey? To take digital security to the next level you should use two-factor authentication (2FA). 2FA is an extra “thing” in addition to your password you need to be able to login. It could be a code sent to your phone over SMS (insecure), to your email (slightly better), a code from a 2FA app on your phone such as Aegis Authenticator (good), or from a hardware token (most secure). It’s easy to think that I went with a YubiKey because it’s the most secure option; but the biggest reason is that a YubiKey is more convenient than a 2FA app. With a 2FA app you have to whip out your phone, open the 2FA app, locate the correct site, and then copy the TOTP code into the website (quickly, before the code changes). It’s honestly not that convenient, even for someone like me who’s used this setup for years. With a YubiKey you plug it into a USB port and press it when it flashes. Or on the phone you can use NFC. NFC is slightly more annoying compared to plugging it in as you need to move/hold it in a specific spot, yet it’s still preferable to having to jump between apps on the phone. There are hardware keys other than YubiKey of course. I’ve used YubiKey for years and have a good experience. Don’t fix what isn’t broken. The setup Here’s a few quick notes on how I setup her new accounts: Password management with Bitwarden The first thing we did was setup Bitwarden as the password manager for her. I chose the family plan so I can handle the billing. To give her access I installed Bitwarden as: I gave her a YubiKey and registered it with Bitwarden for additional security. As a backup I also registered my own YubiKeys on her account; if she loses her key we still have others she can use. Although it was a bit confusing for her I think she appreciates not having to remember a dozen different passwords and can simply remember one (stronger) password. We can also share passwords easily via Bitwarden (for news papers, Spotify, etc). The YubiKey itself is very user friendly and she hasn’t run into any usability issues. Email on Fastmail With the core security up and running the next step was to change her email: Gave her an email address on Fastmail with her own domain (<firstname>@<lastname>.com). She has a basic account that I manage (there’s a Duo plan that I couldn’t migrate to at this time). I secured the account with our YubiKeys and a generated password stored in Bitwarden. We bolstered the security of her old Hotmail account by generating a new password and registering our YubiKeys. Forward all email from her old Hotmail address to her new address. With this done she has a secure email account with an email address that she owns. As is proper she’s been changing her contact information and changing email address in her other services. It’s a slow process but I can’t be too critical—I still have a few services that use my old Gmail address even though I migrated to my own domain more than a decade ago. Notes on recovery and redundancy It’s great to worry about weak phishing, weak passwords, and getting hacked. But for most people the much bigger risk is to forget your password or lose your second factor auth, and get locked out that way. To reduce the risk of losing access to her accounts we have: YubiKeys for all accounts. The recovery codes for all accounts are written down and secured. My own accounts can recover her Bitwarden and Fastmail accounts via their built-in recovery functionality. Perfect is the enemy of good Some go further than we’ve done here, others do less, and I think that’s fine. It’s important to not compare yourself with others too much; even small security measures makes a big difference in practice. Not doing anything at all because you feel overwhelmed is worse than doing something, even something simple as making sure you’re using a strong password for your email account.

There are two conflicting forces in play in setting up your computer environment: It’s common to find people get stuck at the extreme ends of the spectrum; some programmers refuse to configure or learn their tools at all, while others get stuck re-configuring their setups constantly without any productivity gains to show for it. Finding a balance can be tricky. With regards to terminals I’ve been using alacritty for many years. It gets the job done but I don’t know if I’m missing out on anything? I’ve been meaning to look at alternatives like wezterm and kitty but I never got far enough to try them out. On one hand it’s just a terminal, what difference could it make? Enter Ghostty, a terminal so hyped up it made me drop any useful things I was working on and see what the fuzz was about. I don’t quite get why people hype up a terminal of all things but here we are. Ghostty didn’t revolutionize my setup or anything but I admit that Ghostty is quite nice and it has replaced alacritty as my terminal. I just want a blank canvas without any decorations One of the big selling points of Ghostty is it’s native platform integration. It’s supposed to integrate well with your window manager so it looks the same and gives you some extra functionality… But I don’t know why I should care—I just want a big square without decorations of any kind. You’re supposed to to be able to simply turn off any window decorations: window-decoration = false At the moment there’s a bug that requires you set some weird GTK settings to fully remove the borders: gtk-titlebar = false gtk-adwaita = false It’s unfortunate as I haven’t done any GKT configuration on my machine (I use XMonad as my window manager and I don’t have any window decorations anywhere). There might some useful native features I don’t know about. The password input style is neat for instance, although I’m not sure it does anything functionally different compared to other terminals: Cursor invert cursor-invert-fg-bg = true In alacritty I’ve had the cursor invert the background and foreground and you can do that in Ghostty too. I ran into an issue where it interferes with indent-blankline.nvim making the cursor very hard to spot in indents (taking the color of the indent guides, which is by design low contrast with the background). Annoying but it gave me the shove I needed to try out different plugins to see if the problem persisted. I ended up with (an even nicer) setup using snacks.nvim that doesn’t hide the cursor: Left: indent-blankline.nvim (cursor barely visible) snacks.nvim (cursor visible and it highlights scope). Minimum contrast Unreadable ls output is a staple of the excellent Linux UX. It might look like this: Super annoying. You can of course configure the ls output colors but that’s just for one program and it won’t automatically follow when you ssh to another server. Ghostty’s minimum-contrast option ensures that the text and background always has enough contrast to be visible: minimum-contrast = 1.05 Most excellent. This feature has the potential to break “eye candy” features, such the Neovim indent lines plugins if you use a low contrast configuration. I still run into minor issues from time to time. Hide cursor while typing mouse-hide-while-typing = true A small quality-of-life feature is the ability to hide the cursor when typing. I didn’t know I needed this in my life. Consistent font sizing between desktop and laptop With alacritty I have an annoying problem where I need to use a very different font size on my laptop and my desktop (8 and 12). This wasn’t always the case and I think something may have changed in alacritty but I’m not sure. Ghostty doesn’t have this problem and I can now use the same font settings across my machines ( font-size = 16 ). Ligature support The issue for adding ligatures to alacritty was closed eight years ago and even though I wanted to try ligatures I couldn’t be bothered to “run a low quality fork”. Ghostty seems like the opposite of “low quality” and it renders Iosevka’s ligatures very well: My configured ligatures of Iosevka, rendered in Ghostty. Overall I feel that the font rendering in Ghostty is a little better than in alacritty, although that might be recency bias. I’m still undecided on ligatures but I love that I don’t have to feel limited by the terminal. I use a custom Iosevka build with these Ghostty settings: font-family = IosevkaTreeLig Nerd Font font-style = Medium font-style-bold = Bold font-style-italic = Medium Italic font-style-bold-italic = Bold Italic font-size = 16 Colorscheme While Ghostty has an absolutely excellent theme selector with a bunch of included themes (ghostty +list-themes) melange-nvim wasn’t included, so I had to configure the colorscheme myself. It was fairly straightforward even though the palette = 0= syntax was a bit surprising: # The dark variant of melange background = #292522 foreground = #ECE1D7 palette = 0=#867462 palette = 1=#D47766 palette = 2=#85B695 palette = 3=#EBC06D palette = 4=#A3A9CE palette = 5=#CF9BC2 palette = 6=#89B3B6 palette = 7=#ECE1D7 palette = 8=#34302C palette = 9=#BD8183 palette = 10=#78997A palette = 11=#E49B5D palette = 12=#7F91B2 palette = 13=#B380B0 palette = 14=#7B9695 palette = 15=#C1A78E # I think it's nice to colorize the selection too selection-background = #403a36 selection-foreground = #c1a78e I’m happy with Ghostty In the end Ghostty has improved my setup and I’m happy I took time to try it out. It took a little more time than “just launch it” but it absolutely wasn’t a big deal. The reward was a few pleasant improvements that have improved my life a little. And perhaps most important of all: I’m now an alpha Nerd that uses a terminal written in Zig. Did I create a custom highlighter for the Ghostty configuration file just to have proper syntax highlighting for this one blog post? You bet I did. (It’s a simple treesitter grammar.)