I write this blog because I enjoy writing. Some people enjoy reading what I write, which makes me feel really great! Recently, I took down a post and stopped writing for a few months because I didn't love the reaction I was getting on social media sites like Reddit and Hacker News. On these social networks, there seems to be an epidemic of "gotcha" commenters, contrarians, and know-it-alls. No matter what you post, you can be sure that folks will come with their sharpest pitchforks to try to skewer you. I'm not sure exactly what it is about those two websites in particular. I suspect it's the gamification of the comment system (more upvotes = more points = dopamine hit). Unfortunately, it seems the easiest way to win points on these sites is to tear down the original content. At any rate, I really don't enjoy bad faith Internet comments and I have a decent-enough following outside of these social networks that I don't really have to endure them. Some might argue I need thicker skin. I don't think that's really true: your experience on the Internet is what you make of it. You don't have to participate in parts of it if you don't want. Also, I know many of you reading this post (likely RSS subscribers at this point) came from Reddit or Hacker News in the first place. I don't mean to insult you or suggest by any means that everyone, or even the majority of users, on these sites are acting in bad faith. Still, I have taken a page from Tom MacWright's playbook and decided to add a bit of javascript to my website that helpfully redirects users from these two sites elsewhere: try { const bannedReferrers = [/news\.ycombinator\.com/i, /reddit\.com/i]; if (document.referrer) { const ref = new URL(document.referrer); if (bannedReferrers.some((r) => r.test(ref.host))) { window.location.href = "https://google.com/"; } } } catch (e) {} After implementing this redirect, I feel a lot more energized to write! I'm no longer worried about having to endlessly caveat my work for fear of getting bludgeoned on social media. I'm writing what I want to write and, if for those of you here to join me, I say thank you!

The older I get, the more I dislike clever code. This is not a controversial take; it is pretty-well agreed upon that clever code is bad. But I particularly like the on-call responsiblity framing: write code that you can understand when you get paged at 2am. If you have never been lucky enough to get paged a 2am, I'll paint the picture for you: A critical part of the app is down. Your phone starts dinging on your nightstand next to you. You wake up with a start, not quite sure who you are or where you are. You put on your glasses and squint at the way-too-bright screen of your phone. It's PagerDuty. "Oh shit," you think. You pop open your laptop, open the PagerDuty web app, and read the alert. You go to your telemetry and logging systems and figure out approximate whereabouts in the codebase the issue is. You open your IDE and start sweating: "I have no idea what the hell any of this code means." The git blame shows you wrote the code 2 years ago. You thought that abstraction was pretty clever at the time, but now you're paying a price: your code is inscrutable to an exhausted, stressed version of yourself who just wants to get the app back online. Reasons for clever code # There are a few reasons for clever code that I have seen over my career. Thinking clever code is inherently good # I think at some point a lot of engineers end up in a place where they become very skilled in a language before they understand the importance of writing clean, readable code. Consider the following two javascript snippets: snippet 1 const sum = items.reduce( (acc, el) => (typeof el === "number" ? acc + el : acc), 0 ); snippet 2 let sum = 0; for (const item of items) { if (typeof item === "number") { sum = sum + item; } } At one point in my career, I would have assumed the first snippet was superior: fewer lines and uses the reduce method! But I promise far more engineers can very quickly and easily understand what's going on in the second snippet. I would much rather the second snippet in my codebase any day. Premature abstraction # Premature abstractions tend to be pretty common in object-oriented languages. This stackexchange answer made me laugh quite a bit, so I'll use it as an example. Let's say you have a system with employee information. Well perhaps you decide employees are types of humans, so we'd better have a human class, and humans are a type of mammal, so we'd better have a mammal class, and so on. All of a sudden, you might have to navigate several layers up to the animal class to see an employee's properties and methods. As the stackexchange answer succinctly put it: As a result, we ended up with code that really only needed to deal with, say, records of employees, but were carefully written to be ready if you ever hired an arachnid or maybe a crustacean. DRY dogma # Don't Repeat Yourself (DRY) is a coding philosophy where you try to minimize the amount of code repeated in your software. In theory, even repeating code once results in an increased chance that you'll miss updating the code in both places or having inconsistent behavior when you have to implement the code somewhere else. In practice, DRYing up code can sometimes be complex. Perhaps there is a little repeated code shared between client and server. Do we need to create a way to share this logic? If it's only one small instance, it simply may not be worth the complexity of sharing logic. If this is going to be a common issue in the codebase, then perhaps centralizing the logic is worth it. But importantly we can't just assume that one instance of repeated code means we must eliminate the redundancy. What should we aim for instead? # There's definitely a balance to be struck. We can't have purely dumb code with no abstractions: that ends up being pretty error prone. Imagine you're working with an API that has some set of required headers. Forcing all engineers to remember to include those headers with every API call is error-prone. file1 fetch("/api/users", { headers: { Authorization: `Bearer ${token}`, AppVersion: version, XsrfToken: xsrfToken, }, }); fetch(`/api/users/${userId}`, { headers: { Authorization: `Bearer ${token}`, AppVersion: version, XsrfToken: xsrfToken, }, }); file2 fetch("/api/transactions", { headers: { Authorization: `Bearer ${token}`, AppVersion: version, XsrfToken: xsrfToken, }, }); file3 fetch("/api/settings", { headers: { Authorization: `Bearer ${token}`, AppVersion: version, XsrfToken: xsrfToken, }, }); Furthermore, having to track down every instance of that API call to update the headers (or any other required info) could be challenging. In this instance, it makes a lot of sense to create some kind of API service that encapsulates the header logic: service function apiRequest(...args) { const [url, headers, ...rest] = args; return fetch( url, { ...headers, Authorization: `Bearer ${token}`, AppVersion: version, XsrfToken: xsrfToken, }, ...rest ); } file1 apiRequest("/api/users"); apiRequest(`/api/users/${userId}`); file2 apiRequest("/api/transactions"); file3 apiRequest("/api/settings"); The apiRequest function is a pretty helpful abstraction. It helps that it is a very minimal abstraction: just enough to prevent future engineers from making mistakes but not so much that it's confusing. These kinds of abstractions, however, can get out of hand. I have see code where making a request looks something like this: const API_PATH = "api"; const USER_PATH = "user"; const TRANSACTIONS_PATH = "transactions"; const SETTINGS_PATH = "settings"; createRequest( endpointGenerationFn, [API_PATH, USER_PATH], getHeaderOverrides("authenticated") ); createRequest( endpointGenerationFn, [API_PATH, USER_PATH, userId], getHeaderOverrides("authenticated") ); There's really no need for this. You're not saving all that much for making variables instead of using strings for paths. In fact, this ends up making it really hard for someone debugging the code to search! Typically, I'd lok for the string "api/user" in my IDE to try to find the location of the request. Would I be able to find it with this abstraction? Would I be able to find it at 2am? Furthermore, passing an endpoint-generation function that consumes the path parts seems like overkill and may be inscrutable to more junior engineers (or, again, 2am you). Keep it as simple as possible # So I think in the end my message is to keep your code as simple as possible. Don't create some abstraction that may or may not be needed eventually. Weigh the maintenance value of DRYing up parts of your codebase versus readability.

I have noticed a trend in a handful of products I've worked on at big tech companies. I have friends at other big tech companies that have noticed a similar trend: The products are kind of crummy. Here are some experiences that I have often encountered: the UI is flakey and/or unintuitive there is a lot of cruft in the codebase that has never been cleaned up bugs that have "acceptable" workarounds that never get fixed packages/dependencies are badly out of date the developer experience is crummy (bad build times, easily breakable processes) One of the reasons I have found for these issues is that we simply aren't investing enough time to increase product quality: we have poorly or nonexistent quality metrics, invest minimally in testing infrastructure (and actually writing tests), and don't invest in improving the inner loop. But why is this? My experience has been that quality is simply a hard sell in bigh tech. Let's first talk about something that's an easy sell right now: AI everything. Why is this an easy sell? Well, Microsoft could announce they put ChatGPT in a toaster and their stock price would jump $5/share. The sad truth is that big tech is hyper-focused on doing the things that make their stock prices go up in the short-term. It's hard to make this connection with quality initiatives. If your software is slightly less shitty, the stock price won't jump next week. So instead of being able to sell the obvious benefit of shiny new features, you need to have an Engineering Manager willing to risk having lower impact for the sake of having a better product. Even if there is broad consensus in your team, group, org that these quality improvements are necessary, there's a point up the corporate hierarchy where it simply doesn't matter to them. Certainly not as much as shipping some feature to great fanfare. Part of a bigger strategy? # Cory Doctorow has said some interesting things about enshittification in big tech: "enshittification is a three-stage process: first, surpluses are allocated to users until they are locked in. Then they are withdrawn and given to business-customers until they are locked in. Then all the value is harvested for the company's shareholders, leaving just enough residual value in the service to keep both end-users and business-customers glued to the platform." At a macro level, it's possible this is the strategy: hook users initially, make them dependent on your product, and then cram in superficial features that make the stock go up but don't offer real value, and keep the customers simply because they really have no choice but to use your product (an enterprise Office 365 customer probably isn't switching anytime soon). This does seem to have been a good strategy in the short-term: look at Microsoft's stock ever since they started cranking out AI everything. But how can the quality corner-cutting work long-term? I hope the hubris will backfire # Something will have to give. Big tech products can't just keep getting shittier—can they? I'd like to think some smaller competitors will come eat their lunch, but I'm not sure. Hopefully we're not all too entrenched in the big tech ecosystem for this to happen.

Coding interviews are controversial. It can be unpleasant to code in front of someone else, knowing you're being judged. And who likes failing? Especially when it feels like you failed intellectually. But, coding interviews are effective. One big criticism of coding interviews is that they end up filtering out a lot of great candidates. It's true: plenty of great developers don't do well in coding interviews. Maybe they don't perform well under pressure. Or perhaps they don't have time (or desire) to cram leetcode. So if this is happening, then how can coding interviews be effective? Minimizing risk # Coding interviews are optimized towards minimizing risk and hiring a bad candidate is far worse than not hiring a good candidate. In other words, the hiring process is geared towards minimizing false positives, not false negatives. The truth is, there are typically a bunch of good candidates that apply for a job. There are also not-so-great candidates. As long as a company hires one of the good ones, they don't really care if they lose all the rest of the good ones. They just need to make sure they don't hire one of the no-so-great ones. Coding interviews are a decent way to screen out the false positives. Watching someone solve coding challenges gives you some assurance that they can, well, code. Why I myself like coding interviews # Beyond why coding interviews are beneficial for the company, I actually enjoy them as an interviewer. It's not that I like making people uncomfortable or judging them (I don't), but rather I like seeing how potential future colleagues think. How do they think about problems? Do they plan their solution or just jump in? This is a person with whom I'll be working closely. How do they respond to their code being scrutinized? Do I feel comfortable having to "own" their code? On automated online assessments (OAs) # The junior developer market right now is extremely competitive and therefore it is common to use automated coding challenges (OAs) as an initial screen. OAs kind of accomplish the false positive filtering mentioned above, but that assumes candidates aren't cheating. But some are. So you're filtering your candidate pool down to good candidates and dishonest candidates. Maybe that's worth it? Additionally, OAs don't give you any chance to interact with candidates. So you get no sense of what they'd really be like to work with. All in all, I'm not a fan of OAs. Far from perfect # Coding interviews are far from perfect. They're a terrible simulation of actual working conditions. They favor individuals who have time to do the prep work (e.g., grind leetcode). They're subject to myriad biases of the interviewer. But there's a reason companies still use them: they're effective in minimizing hiring risk for the company. And to them, that's the ball game.