Full Width 
Shortcuts 
Sign Up 
Log In 
Articles 
Reading List More from Marco.org
For the first half of my childhood in suburban Ohio, we lived next to Bob. Bob and his wife were a kind, reserved older couple who decorated their home mostly with crucifixes and talked about Jesus a lot. Bob helped my mom with a lot of common household tasks after my dad died. When she woke up to a small fire on our deck, she didn’t call the fire department — she called Bob.1 I never learned any of Bob’s political views, though I can make some guesses in retrospect. They never mattered. He was just our neighbor. We later moved, and hit the neighbor jackpot with Van. Van was deeply kind, generous, and friendly — the sort of neighbor everyone wishes for. In my lazy teenage years, he’d often mow our lawn or shovel our snow for us before I even woke up. As his mobility later declined, I was honored to return the favor. Van and his delightful wife passed away years ago, before I learned how either of them felt on any political issue. If they were my neighbors today, how likely would that be? * * * If I learn today that my neighbors have political views that my “side” considers unacceptable and unforgivable, should I be able to have dinner at their house, shovel their snow, or even greet them outside? Should I be condemned for supporting or associating with them in non-political contexts? Should I be condemned for not publicly condemning them myself? While privilege and power dynamics play a complex and unavoidable role in this, I don’t want to associate with any community that would insist on either of those.2 And I can’t help but feel that maybe we were better off before we knew everyone’s hot takes on everything. The town coffee shop was just a coffee shop. We weren’t publicly shamed for going there because one of the owners was an ass. It was just a place to hang out with our friends. Our casual work friends were just casual work friends. We didn’t expect them to take positions on the world’s most complicated conflicts. We could just talk about weather and TV shows, and maybe sometimes get a beer after work. And our neighbors were just our neighbors. That was the day I learned the word “SHIT!” ↩︎ Somewhere on Bob’s wall might’ve been a relevant statement from an influential political dissident about casting the first stone. ↩︎
I have ADHD. Probably.1 My entire adolescence was defined by forgetting to do my homework, disappointing everyone around me, and being told by every adult that I was lazy, “just” needed to try harder, and wasn’t living up to my potential. I’ll be working on the resulting shame and anxiety for the rest of my life.2 If someone tells me, “Remember to pick up the dry cleaning tomorrow,” I definitely won’t remember. If someone tells me, “Remember to put the laundry in the dryer in ten minutes,” I probably won’t even remember that. If you’re thinking, “It’s just ten minutes! Nobody can possibly forget that,” I have made an app that’s probably not for you. * * * Computers saved me. Despite constantly being told that I’d never get a good job, computers provided a lucrative career path filled with even worse academic performers who couldn’t care less about my grades. What a stroke of luck! I’d be mediocre to terrible at most jobs, but I turned out to be very good at using computers to turn coffee and Phish into money. But computers also save me in smaller, everyday ways. They help me remember. * * * Sorry, I just had to go put the laundry in the dryer, which I had forgotten. Really. It’s that bad. * * * Calendar alarms changed my life. Events without alarms don’t happen. (If you’re thinking, “Why doesn’t he just check his calendar?” I have made an app that’s probably not for you.) I had less success with reminders until we had ubiquitous voice capture. If I think of something at inconvenient times, like while driving or exercising, I need to capture it immediately or I’ll forget. It cannot wait until I get to my phone or computer. It has to be recorded right then or it’s gone. Siri, for all of its faults, has always been very good at creating tasks in Apple’s Reminders app — and Siri is everywhere. Computer. Phone. Car. Watch. I can almost always ask Siri to add something to Reminders. So Reminders’ integration and ubiquity are invaluable to me. The Reminders app, though, doesn’t fit me at all. I don’t like how it looks, how it works, or how it’s organized. Hell, I don’t even like its icon. There’s nothing about it I like. So I never open it. (Not as if I’d ever remember to check it anyway.)3 Most of my Reminders interaction has always been via Siri and notifications. And that fits me very well, with three major exceptions: If I say “Remind me to buy milk,” but I forget to specify a time (or Siri misses it), Reminders will never notify me, and I’ll never check the app, so it’ll be lost. If I inadvertently dismiss a Reminders notification without snoozing it, Reminders will never notify me about it again, so it’ll be lost. When I do snooze a Reminders notification, which I do a lot, the snooze options suck.4 This spring, I made myself an app to fix all three, and… it escalated. I’ve been using it for months, and it has profoundly improved my life. Today, I’m releasing it, in hopes that maybe it can help other people, too. * * * Introducing Unforgetful. The concept is simple: Reminders for ADHD. This means: It’s impossible to lose a task. Notifications always repeat, even if you miss or dismiss them, until the task is completed or deleted. Designed for procrastination. Snoozing is a core feature, with thoughtful intervals that scale as you snooze a task more. Nothing is hidden away. A hidden task is a forgotten task. No folders, no tags, no organization, no different views or modes. No judgment or shame. Nothing is overdue. You’re not in trouble. Everything is either due now or in the future. Didn’t get to it today? Maybe tomorrow. Every day is a fresh start. And Unforgetful does all of that with your Reminders data. That means: Siri works perfectly, everywhere. Just say “Remind me…” without having to specify an app. It replaces your Reminders notifications. Turn them off, turn these on. No import. This isn’t a new system to learn or migrate into. Your Reminders data is just… there. No export. If you try Unforgetful and it’s not for you, just delete it and turn Reminders notifications back on, and all of your data is right there in Reminders. Mix and match. Don’t like it everywhere? You can still use Reminders on your Vision Pro or whatever, or simultaneously use Unforgetful with Reminders or any other app that uses Reminders data. I’ve optimized lots of features and details for ADHD, too: Fast capture with dictation. Tap the microphone button in Unforgetful — or its full suite of widgets, or its Lock Screen or Control Center controls — and quickly dictate a task.5 Spaced-out notifications, not an overwhelming pile at once. If multiple tasks are set to alert you at the same time, they space themselves out so you’re not barraged with a hopeless stack of obligations. And the order changes every day, so nothing gets lost between things. Recurring-task backlogs don’t pile up. If you miss multiple intervals for a recurring task, completing it doesn’t make you click through all of your past failures to get to the present day… it just schedules the next one from now. Remind me 5 minutes after I get home. Location-based reminders can notify you after a set delay. Because if a “remind me when I get home” task fires as I pull into the driveway, I’ll forget it by the time I’m inside, unloaded, and ready to do anything about it. Unforgetful is a Mac and iOS app that’s $19.99 per year (US). One subscription buys all platforms. There’s a one-month free trial so you can really live with it and see if it’s right for you before paying. There are a million task-management apps. Unforgetful is not for everyone, but it’s really for me, far more than anything else has ever been. Frankly, I have no idea how to reach the other people it’s for. But I know you’re out there. If any of this resonates with you… give it a shot. Despite significant progress on my mental health around this from therapy and media, I haven’t (yet?) sought an official ADHD diagnosis because I haven’t sought medication, and that seemed like the main reason why I’d want a diagnosis. That’s probably worth reconsidering. I’ll make myself a reminder to do it. Someday. ↩︎ I saw a psychologist throughout high school for my homework problem. Rather than recognizing 7 of the 9 symptoms of what we now call “inattentive” ADHD, he was just one more adult condemning me for not caring. (I really did care. Nobody wanted me to be “better” more than me.) In the 1990s, if you didn’t do homework but weren’t hyperactive, you were obviously just choosing to be lazy, and the solution was apparently to apply more shame. Not all doctors are good. ↩︎ I’ve tried other apps that are beautiful and work differently, but they’re all complete task-management systems that introduce a lot of features and complexity that I neither need nor want, at the expense of Reminders’ ubiquitous integration that I highly value. I’ve also tried other apps that use the Reminders database, but I haven’t found any of them to be… good. (Sorry. I probably didn’t try yours.) ↩︎ At least they specify the actual snooze times now instead of vague descriptions like “the afternoon,” which I proudly take full credit for, since it happened to change only after I ranted about it relentlessly on our podcast for months. If I truly made this happen, it might be the greatest impact on the world I’ll ever have. ↩︎ Dictation just records every word you say as the title, which is extremely fast and reliable. It doesn’t yet recognize things like “Remind me to buy milk at 10 AM tomorrow.” I haven’t nailed that natural-language processing yet — coming soon, maybe! For now, Siri does that part better. ↩︎
As Apple celebrates its fiftieth birthday, we celebrate the spirit of its formation, when people who loved computers started making great computers to inspire more people to love computers. That spirit is difficult to find in the tech business today. Immense scale, soulless optimization, and an insatiable thirst for growth dominate its behavior and discourse, leaving little room for the spirit and principles embodied by Steve Jobs and Steve Wozniak. Apple still has this spirit, and I believe you do, too. But it’s not infinite or invincible. It’s under constant pressure, including from Apple itself. It seems likely that you’ll soon be leading Apple, which will place unfathomable responsibility on your shoulders. As you grow into the leader that we know you can be, I urge you, on behalf of everyone who loves computers as much as we do, to protect and cultivate this spirit of Apple’s founders as the company’s top priority: We love computers. We don’t hide that — we celebrate it! We use computers to enhance our minds, lives, and abilities — not to be controlled, restricted, tricked, placated, angered, or surveilled. Our computers work for us, with the utmost respect for our time, attention, money, data, and privacy. We are customers and owners — not resources to be harvested, annoyed, or badgered into ever more services and upsells. Apple leads the industry in these values, but leading doesn’t always mean excelling. Remaining true to these values requires constant diligence, honest evaluation, introspection, and the audacity and courage to effect change. Apple doesn’t settle for fine, functional, or good enough in its hardware (and thanks for your incredible work on that). We love making and using products that aren’t just great, but greater than they need to be, always raising the bar of greatness for its own sake. Software, services, revenue sources, and world impact need to be held to that same standard. Focus on making great computers with great user experiences above all else, and you can trust that every other major goal will follow: profit, market share, expansion, impact, and benefit to the world. Making great computers must remain Apple’s top responsibility, because if you don’t do it, nobody will.
Ten years ago, Apple’s Phil Schiller surprised Apple enthusiasts and developers by walking out on stage at John Gruber’s The Talk Show Live WWDC event and giving an open, human, honest interview to a somewhat jaded community. I wrote this in response: Both Apple and Phil Schiller himself took a huge risk in doing this. That they agreed at all is a noteworthy gift to this community of long-time enthusiasts, many of whom have felt under-appreciated as the company has grown. […] Phil’s appearance on the show was warm, genuine, informative, and entertaining. It was human. And humanizing the company and its decisions, especially to developers — remember, developer relations is all under Phil — might be worth the PR risk. This started a ten-year run of interviews by Apple executives on The Talk Show every year at WWDC that proved to be great, surprisingly safe PR for Apple. No executive ever said something they shouldn’t have (they’re pros), no sensational or negative news stories ever resulted from them, and Apple’s enthusiastic fans and developers felt seen, heard, and appreciated. * * * For unspecified reasons, Apple has declined to participate this year, ending what had become a beloved tradition in our community — and I can’t help but suspect that it won’t come back. (A lot has changed in the meantime.) Maybe Apple has good reasons. Maybe not. We’ll see what their WWDC PR strategy looks like in a couple of weeks. In the absence of any other information, it’s easy to assume that Apple no longer wants its executives to be interviewed in a human, unscripted, unedited context that may contain hard questions, and that Apple no longer feels it necessary to show their appreciation to our community and developers in this way. I hope that’s either not the case, or it doesn’t stay the case for long. This will be the first WWDC I’m not attending since 2009 (excluding the remote 2020 one, of course). Given my realizations about my relationship with Apple and how they view developers, I’ve decided that it’s best for me to take a break this year, gain some perspective, and decide what my future relationship should look like. Maybe Apple’s leaders are doing that, too.
Today, on the tenth anniversary of Overcast 1.0, I’m happy to launch a complete rewrite and redesign of most of the iOS app, built to carry Overcast into the next decade — and hopefully beyond. Like podcasts better than blog posts? Listen to ATP #596 for more! What’s new Much faster, more responsive, more reliable, and more accessible. Modern design, optimized for easily-reached controls on today’s phone sizes. Improvements throughout, such as undoing large seeks, new playlist-priority options, easier navigation, and more. What’s not Most features. Overcast is still Overcast! The audio engine. It’s the best part of Overcast, and still leads the industry in sound quality, silence skipping, and volume normalization. (More soon!) The business. I’m still a one-person operation, with no funding or external ownership, serving only my customers. My principles. I always want to make the best podcast app, and I’ll never disrespect your time, attention, or privacy. What’s gone Streaming. Most big podcasts now use dynamic ad insertion, which causes bugs and problems for streaming playback.1 Downloading episodes completely before they begin playback is much more reliable. Tapping a non-downloading episode will now open the playback screen, download it, then start playback. It works similarly to the way streaming did before, but playback begins after the download completes, not after a portion of it is buffered. On today’s fast networks, this usually only takes a few extra seconds. And in the near future, I’ll be adding smarter options and more control over selective downloading of episodes to further improve the experience for people who don’t automatically download every episode. What’s next The last few missing features from the old app, such as Shortcuts support, storage management, and OPML. These are absent now, but will return soon. More options for downloading and deleting episodes. Upgrading the Apple Watch app to the new, faster sync engine. (The Watch app is currently unchanged from the previous one.) And, of course, more features, including some of your most-requested features over the last decade. Getting this rewrite out the door was a monumental task. Thank you for your patience as I work through this list! Why? Most of Overcast’s core code was 10 years old, which made it cumbersome or impossible to easily move with the times, adopt new iOS functionality, or add new features, especially as one person. That’s why there haven’t been many new features or changes in years. You saw it, and I saw it. I wasn’t able to serve my customers as well as I wanted. For Overcast to have a future, it needed a modern foundation for its second decade. I’ve spent the past 18 months rebuilding most of the app with Swift, SwiftUI, Blackbird, and modern Swift concurrency. Now, development is rapidly accelerating. I’m more responsive, iterating more quickly, and ultimately making the app much better. Thank you all so much for the first decade of Overcast. Here’s to the next one. Dynamic ad insertion (DAI) splices ads into each download, and no two downloads are guaranteed to have the same number or duration of ads. So, for example, if the first half of an episode downloads, then the download fails, and it downloads the second half with another request, the combined audio may jump forward or back at the halfway mark, losing or repeating content. ↩︎
More in programming
After a write-up in the New York Times, Mommy Bloggers had two options. Either lean in, or step back. Given how popular it became after that, it's not hard to guess which option they chose. The post Mommy bloggers react appeared first on The History of the Web.
I'm quite a bit late on this one, but Haunt version 0.4.0 was released released back in July. I haven't had much time for blogging, but I'm catching up now! This release contains a small set of improvements and bug fixes since the 0.3.0 release in 2024. About Haunt Haunt is a static site generator that uses the Guile Scheme as its configuration language. It aims to be simple, functional, and extensible. Features include: Easy blog and Atom/RSS feed generation Markdown post support Simple development server for viewing edits before publishing Purely functional build process User extensibility Notable changes Added support for HTML in Markdown documents. This was a long time coming because guile-markdown did not support it and the library was abandoned by the original maintainer. As part of my work at Spritely, we forked it, implemented the relevant portions of the CommonMark specification, and released it. Spritely's guile-commonmark fork is now considered to be the official upstream by Guix and others. A further consequence of this is that guile-lib is now a required dependency for building Haunt as we need the (htmlprag) module to parse Markdown documents with embedded HTML. html->shtml from guile-lib's (htmlprag) module is now used instead of xml->sxml in the HTML reader. It was silly of me to use xml->sxml for this purpose years ago, but at the time I wanted guile-lib to be an optional dependency. Added haunt new subcommand for creating a new site. Added default directory, template, and prefix arguments to flat-pages procedure. Added support for index metadata flag to flat pages for pretty URLs. Flat pages now receive all page metadata, not just the page title. This is a breaking change from 0.3.0. Added .scm as an additional extension for sxml-reader. make-file-extension-matcher now supports multiple extensions. Fixed emission of <script> and <style> elements. Fixed handling of no available reader in flat pages builder. Fixed unreachable error handling clause when a reader is not found for a post. Fixed default blog theme template missing an <html> tag. Fixed overloaded -h option in haunt serve. Deprecated post in Skribe reader in favor of document. Download Haunt 0.4.0 is already available in Guix: guix pull guix install haunt See the Haunt project page for information on how to build from source. Thank you to Camilo Rodrigues, Noé Lopez, jgart, Jakob L. Kreuze, and Daniel Meißner for their contributions to this release! Happy haunting!
This is a transcript from a talk I gave at the German Perl Workshop earlier this year. If you'd prefer to watch the video recording, you can find it here. I have lots of photographic projects on the go. Lots of these being on film, as some of these I started shooting a long time ago. I don’t have any particular loyalty or attraction to film, it’s just that I started shooting many of these projects before affordable medium format digital was available. Since I mostly shoot medium/large format film I never really jumped to digital until recently, so film has continued to feature heavily in my workflow. That said, it’s a pain in the arse to shoot film now given the spiraling costs, limited availability, and issues around traveling with it: modern airport CT scanners, being rolled out across many airports, are much more convenient but will fog film. Asking for a hand inspection often comes down to arbitrary timing - how busy the security is, how experienced the operator is, or if you’re lucky/unlucky. I’ve had film forced to be scanned (and fogged) and politely argued with security on more than one occasion. I don’t want to deal with that so don’t travel with film anymore, thus I am shooting less of it and have mostly moved to digital. I still have a tonne of film I need to scan and process however. Here’s just some of the binders and files of film. I don’t plan to scan all of this, but I do plan to scan the ones I need to. Probably in the region of a couple of thousand frames. I want to scan to the highest possible quality (within reason) for archiving, book projects, and large prints. If you’re wondering how large I print, it can be up to 160x60cm panoramics for selling. This is restricted by the size of my printer (that’s another story). Three Years Ago Three years ago I almost bought a scanner. I ended up blogging about it and the post got a bit of traction on Hacker News (HN). I’m never quite sure which posts I submit will pique the interest of the users. I’ll spend months chipping away at a draft and when I post it it tanks. Or I’ll cobble something together in twenty minutes, like the linked one above, and it gets 440 points and over 300 comments… The thread had some useful suggestions and some not so useful ones, the not so useful ones being effectively “buy an Epson”: I’ve had one for fifteen years and it’s not good enough for large prints or archiving. It’s passable for web stuff and smaller prints, but for my recent use cases? Not even close. Ten years ago I had negatives scanned with a high resolution scanner for the first time and recently, wanting to scan my archives for various projects, I decided I should invest in one of those scanners. The Original Plan The plan, back in 2023, was simple: Buy scanner (at significantly reduced rate) Scan all my film Sell scanner Profit! And I mean profit - the scanner that I almost bought was being offered to me at about 2/3rd of the price they usually sell. And they’re becoming harder to find in working order so the prices are going up. Or profit in not having to pay > 25.- CHF per frame to have someone else do this. You can see the pricing from The Film Lab. You can read the original blog post to find out more about the scanner in question, so I won’t repeat it here. Other than the parts being relevant to the rest of this post, namely that the scanner was showing hard and soft problems. The software that drives the scanner was last updated in 2012, it’s proprietary and closed source, requiring 32bit architecture and no third party drivers or software exist. So you are stuck using old software/computers to run it. Or maybe you could use emulation / virtualisation? The problem there is that the interface is firewire, or SCSI on the even older models, and firewire is known to be problematic on these scanners as the controllers start to go bad after a decade of continued use. That’s a risk, and the scanner was very much EOL as the firewire controller was dying: both ports were bad that suggests controller, not ports. The scanner would have been €5,000 to purchase and then €3,000 (ish) to repair. Or, as HN suggested - just open it up and use a soldering iron. I’m not going to drop 5k on something and then start poking it with a soldering iron. I’ll pass on that thanks. Camera Scanning In the meantime I’ve been camera scanning, which you can read about in another blog post. But how does that compare cost wise? It’s expensive because you’ll need a high resolution camera, a macro lens, copy stand, negative carrier/holder, and quality light source. You’ll look to spend anything from three to five thousand Euros on everything. Camera scanning does actually work well, in that it’s close to a high resolution dedicated scanner. But you have to setup the entire thing every time you want to use it, including ensuring everything is straight and parallel. It also suffers from the same weakness as most other scanning methods. What do you think that is? Film Flatness Or lack thereof: Film is rarely flat, especially so with 35mm. These are pretty mild examples of curl. It tends to be flatter in the larger formats but then you get into flatness issues due to it sagging. The smallest difference in the film plane can cause major issues in sharpness due to focus fall off (film scanning is essentially macro photography). Any workflow or solution that does not take this into account is significantly compromised. And the workflow is only as good as its weakest part. This is the biggest problem in scanning film - all other considerations are more than adequate these days: resolution, dynamic range, etc. However, most negative carriers don’t keep the film perfectly flat. This has always been a problem - this is from a book called “Edge of Darkness” which is about traditional analog photography and printing, and summarises the problems of negative carriers thusly: “if you use a glassless negative carrier, you might as well just buy the cheapest enlarging lens you can find. You are simply throwing away the money and sharpness you paid for it in your enlarging lens, and also in your fine camera and the expensive lenses you bought for it… No film will lie flat in a glassless carrier. That’s right, none… There is no avoiding this issue. Use glass.” So you have to use (anti-newton ring) glass, which introduces other issues - you’ve now got extra glass in the transmission path, and dust (which isn’t a massive problem, but a pain nonetheless). You could use drum scanning, which is absurdly impractical from a cost and operating point of view. Or you could use a Flextight, the scanner I almost bought three years ago. Interim Solution I stuck with camera scanning, but wasn’t happy though, because of film flatness and the setup faff. So of course I started looking for another scanner. I was idly browsing near the end of 2025 and came across this one. It’s exactly the same spec as the one I tried three years ago, except SCSI not Firewire so less prone to failure. It just predates Hasselblad buying Imacon (so is pre the rebranding, etc). It was in Switzerland so I could inspect and pick it up. It was also significantly cheaper than the previous one I had looked at, so worth a punt even if I needed to take a soldering iron to it. We went to St Gallen for a weekend and I picked it up. Here’s the software interface back in my studio. Look at that marvelous interface! None of that liquid glass bollocks. The first scans were promising, but I had the sense things needed some TLC. The first thing was calibrating the focus, which the software can do in combination with a focus slide. I was lucky that the focus slide was included with the scanner and I’m not sure what I would have done otherwise. Probably paid a fortune for a replacement? Possibly a lot of manual trial and error with the software? After doing that I scanned images of the 1951 USAF resolution test chart (taken on ultra high resolution 35mm film): That’s what the resulting scan looked like. Notice that it’s sharp from edge to edge, corner to corner. At 100% crop we can resolve around 110 to 123 line pairs per mm, which equates to about 5,600 to 6,300 DPI. This is beyond the limit of most 35mm lenses, but importantly - exactly to spec for this scanner. So I was happy the focus was calibrated. If you’re curious this is the same target with the camera scanning setup. It’s close, but we’ve got another variable in the workflow, several even, and that impacts the results. It’s not as sharp, and the extra glass in the transmission path causes aberrations. Another thing that needed attention was the power supply. The seller mentioned that “sometimes it takes five minutes to warm up”. Sometimes it was more than five minutes, and the power supply would click click click away. So that needed fixing and it was easy enough to find a compatible new replacement, however it cost 200 Euros. Expensive! The third problem I noticed was that some of the scans were coming out stretched. Often about 10% too wide/long, sometimes more than that. My panoramics looked panoooooooramic. I did some research and someone suggested this might be a “buffering issue”, which I thought was nonsense. Doing some testing I heard slipping sounds when the scanner was pulling the film into the body. After more research I stumbled on a post that suggested the belts need replacing. I opened the scanner up, and sure enough: A ha! You can’t quite see that the one on the back is even worse. I replaced those with compatible belts: 535 synchroflex t 2.5/245. Problem solved. The fourth problem was that the film holders were old and/or had been mishandled. They were falling apart and held together with electrical tape or glue, which didn’t seem optimal. Replacements cost 350 Euros in total for the four I needed. They’re now available cheaper from China, since the patents have expired. Or, you know, China. They used to cost about 200 Euros each from Hasselblad. The fifth problem, which is a potential one and hasn’t manifested yet, is that the lamps may eventually need replacing. I picked up a couple for 25 Euros. That seemed like a reasonable thing to do while they’re still available. Success? Let’s add up the costs of acquiring this scanner and renovating it: Scanner: 1,750.- CHF Power Supply: 175.- CHF Belts: 25.- CHF Film Holders: 350.- CHF Lamps: 25.- CHF Total: 2,325.- CHF (c. 2,500 EUR) In the last year (since acquiring the scanner) I have scanned: c. 250 panoramics frames (~ 6,000 CHF) c. 2,500 medium format frames (~ 80,000 CHF) c. 200 large format frames (~ 9,000 CHF) The figures in parentheses are what it would have cost me to have that number of frames scanned by a third party. That is, er, quite a saving. Also quite a lucrative business model perhaps? I think I can argue the cost of the scanner was a very good investment, and I haven’t finished using it yet. Even if it were to stop working tomorrow, it has already paid for itself many times over. Could it stop working tomorrow? Yes, because of other issues that will be harder to solve. The Bigger Issue(s)? A Power Mac G4 (discontinued in 2004). This came with the scanner, the necessary hardware and software to drive it, and is almost certainly living on borrowed time. Spinning metal is never good in the long-term. I’ll maybe purchase a backup soon, as these can still be found for a couple of hundred Euros. The key thing though, is that this very expensive, very high quality scanner, will at some point be rendered useless by the upgrade treadmill because the software required to run it will be increasingly difficult to run. A scanner that is still used by businesses, educational institutions, and individuals like me. A scanner that originally cost tens of thousands of Euros less than a decade ago. The upgrade treadmill is constantly whirring away. This is from the top of the Seattle Space Needle. “Do not upgrade anything on computer”. Clearly that notice speaks of someone being bitten by an upgrade at some point. I wonder is anyone else feeling the fatigue? Security updates, sure I can understand. But feature creep and trivialities? No! What tangible benefits have the last ten, fifteen, or even twenty years of OS updates brought? Other than security, and compatibility with newer hardware? New hardware is great, really, but by association forced deprecation of older hardware. No! It feels like the upgrade treadmill gets faster and steeper every year. Add to that subscription lock-in and dead endpoints: “I couldn’t vacuum my house because an SSL cert had expired” is what someone told me earlier this year. Fortunately this person is a software engineer so ended up man-in-the-middling the network traffic to get the vacuum cleaner to work again (no SSL-pinning it seems). “GoPro is announcing the end of life of the GoPro Quik app for macOS, effective at the end of 2024”. They discontinued the former in favour of their mobile app, which requires an account, login, subscription, and so on. I just want to transfer the videos from the hardware, I don’t need any of this crap (I don’t need any of that crap, it turns out GoPro haven’t locked the device down enough to prevent using third party apps to access the files. Yet). And, of course, software has to be in everything. These days the scanner would/could have an embedded Raspberry PI? Just a keyboard and mouse input, monitor and USB output would reduce the surface area, connectivity issues, and software dependency. Or software is never done? Because: externalities. I guess software is “done” when it’s no longer supported? Marciano Planque has a good piece on this: When hardware products reach end-of-life (EOL), companies should be forced to open-source the software. I think that’s a fair thing to say. I suspect Hasselblad/Imacon never open-sourced the software due to licensing issues. Or they just lost the source. Or they just don’t care, I don’t know. Maybe some combination of the three. And, inevitably, discontinued hardware like this scanner. Or, that is to say, discontinued parts? What about regulation changes? The panoramics I shoot are with a camera that was discontinued in 2004 because EU regulation banned lead solder in circuit boards. The company decided redesigning the parts wasn’t worth it. Old hardware has new exciting ways to fail. As time goes on components will fail or loosen - components that were expected to last decades. Then that results in tribal knowledge, or worse link rot and QR code rot. A lot of this stuff is hidden in walled gardens. There’s a Facebook Imacon group, for example. Why in the ever-loving fuck is a group for technical people, by technical people, on Facebook? Then there’s misleading AI. “My flextight scans are coming out stretched, what might the problem be?” LLM’s have gobbled up all the right information, and all the wrong information. Or information that is massively out of date. Nowhere in the suggestions here does it mention the belts might need replacing, which, according to my own research, is the most common reason these days. Legacy Software A decade ago I wrote an essay that also hit the front page of HN: All Software is Legacy. I think it is still relevant today, some parts not so much given we are now in The Age of Prompt, but mostly it’s still true. Nicholas always said “legacy software is the ugly stuff that makes you money”, which I think is true. But now it’s the stuff that surrounds us, like when I want to withdraw cash (guess what software most cash machines are still running?). Or when I want to take a train - when I gave this talk in Germany I had to get from the airport to the city centre. The ticket machines were disabled with a sign saying “no longer in use, download the app”. Then register. Then buy the ticket. I just want to give you money. Or when I wanted to pay for parking while stopping off at some random town in the UK - the same situation as with the ticket machines. “Download the app, register, pay”. Fuck that, I went and parked somewhere else. I just want to park, I don’t want to fight with software. Or if I want to hire a bike (not pictured: the half dozen apps on my phone to hire a bike). And when I want to buy stuff from a shop… One of the self-checkouts crashed recently in the coop, rebooting into a version of SUSE Linux from well over a decade ago. We’re collectively creating more and more of this everyday, letting it out into the world where it becomes a future liability for someone or the death knell for something. A pile of bikes, an unplugged ticket machine, a top of the line but no longer driveable scanner. References Imacon Users Group (the non-Facebook group) The state of Hasselblad Flextight scanners (2019) 1951 USAF resolution test chart Vlads Test Target Printer Story Original Scanner Blog Responses to HN Camera Scanning All Software is Legacy Repair Cafe
The Tetris effect is one of psychology’s most easy to reproduce experiments. Simply spend a bit of time playing the eponymous game every day for a few weeks. After a little while, you’ll start recognizing familiar Tetromino shapes in clouds, buildings, and everyday objects. You might even see them appear before your eyes when you start falling asleep. Tom Tang Attention hijacking There’s one lesson the Tetris effect teaches us: whatever you focus on long enough will end up shaping your thoughts. This can be a good thing since it’s how we learn new skills and discover new ideas. Sadly, less and less of our attention is focused intentionally. Instead of picking what we want to see we let other people decide what is supposed to be good for us. Do you want to watch a video? YouTube knows you like cooking and art streams. But why not also recommend a few clips about the stock market bubble, global warming, and the war in Iran. Doomscrolling will make you stay longer and click on a few more ads. Do you want to listen to music? Just open a Spotify playlist and let the algorithm figure out what you like. Please ignore the AI slop they will insert in between real songs to avoid paying royalties to real artists. Do you want to know how your colleagues are doing? Too bad, LinkedIn will bury any relevant career news between the opinion of complete strangers. It is surely just a coincidence that those strangers happen to be shilling whatever Microsoft is invested in at the moment. Do you want the opinion of strangers on a product? Well those Redditors you wanted to ask are probably just a bunch of LLMs talking to a bunch of Russian trolls now. I hope you didn’t value their opinion too much. If, like me and most people, you spend the major part of your day focused on your device, there’s no doubt it’s affecting you. And when you let someone else dictate what appears on your screen, it’s the same as giving them the key to your brain. New York Said Back to an intentional internet The internet wasn’t always like that. Before recommendation algorithms where a thing, you had to decide what you would be doing on the computer. You didn’t really have one big app that you could open and order it to entertain you. Instead, you had a few dozen of bookmarks to websites, each with a specific idea in mind. A site for video game news, that one website with lots of tutorials, a blog about anime that didn’t update often enough, a wiki about a TV show from the 90s… Of course awful things existed on the web. We had Encyclopedia Dramatica and Rotten.com, but you actually had to put the effort to go there if you wanted. Nobody was going to put pictures of dead kids and far-right propaganda as a suggestion after a pancake recipe or a cat video. The good thing is that this intentional internet is still around. It has just been a bit buried below the corporate web, but it’s not very hard to find. After all you’re on this blog, so you probably already have a good idea about it. The main difference between this time and now is you. When you want to get back to reading blogs, RSS feeds, and finish that tutorial instead of doomscrolling shorts, you have to get used to a slower internet. One where content is not infinite and doesn’t get updated every click. But like every habit, the only thing you have to do is to keep at it. And if you pay enough attention to it, something will click in your brain.
