More from bt RSS Feed
Installing OpenBSD on Linveo KVM VPS 2024-10-21 I recently came across an amazing deal for a VPS on Linveo. For just $15 a year they provide: AMD KVM 1GB 1024 MB RAM 1 CPU Core 25 GB NVMe SSD 2000 GB Bandwidth It’s a pretty great deal and I suggest you look more into it if you’re interested! But this post is more focused on setting up OpenBSD via the custom ISO option in the KVM dashboard. Linveo already provides several Linux OS options, along with FreeBSD by default (which is great!). Since there is no OpenBSD template we need to do things manually. Getting Started Once you have your initial VPS up and running, login to the main dashboard and navigate to the Media tab. Under CD/DVD-ROM you’ll want to click “Custom CD/DVD” and enter the direct link to the install76.iso: https://cdn.openbsd.org/pub/OpenBSD/7.6/amd64/install76.iso The "Media" tab of the Linveo Dashboard. Use the official ISO link and set the Boot Order to CD/DVD. Select “Insert”, then set your Boot Order to CD/DVD and click “Apply”. Once complete, Restart your server. Installing via VNC With the server rebooting, jump over to Options and click on “Browser VNC” to launch the web-based VNC client. From here we will boot into the OpenBSD installer and get things going! Follow the installer as you normally would when installing OpenBSD (if you’re unsure, I have a step-by-step walkthrough) until you reach the IPv4 selection. At this point you will want to input your servers IPv4 and IPv6 IPs found under your Network section of your dashboard. Next you will want to set the IPv6 route to first default listed option (not “none”). After that is complete, choose cd0 for your install media (don’t worry about http yet). Continue with the rest of the install (make users if desired, etc) until it tells you to reboot the machine. Go back to the Linveo Dashboard, switch your Boot Order back to “Harddrive” and reboot the machine directly. Booting into OpenBSD Load into the VNC client again. If you did everything correctly you should be greeted with the OpenBSD login prompt. There are a few tweaks we still need to make, so login as the root user. Remember how we installed our sets directly from the cd0? We’ll want to change that. Since we are running OpenBSD “virtually” through KVM, our target network interface will be vio0. Edit the /etc/hostname.vio0 file and add the following: dhcp !route add default <your_gateway_ip> The <your_gateway_ip> can be found under the Network tab of your dashboard. The next file we need to tweak is /etc/resolv.conf. Add the following to it: nameserver 8.8.8.8 nameserver 1.1.1.1 These nameservers are based on your selected IPs under the Resolvers section of Network in the Linveo dashboard. Change these as you see fit, so long as they match what you place in the resolve.conf file. Finally, the last file we need to edit is /etc/pf.conf. Like the others, add the following: pass out proto { tcp, udp } from any to any port 53 Final Stretch Now just reboot the server. Log back in as your desired user and everything should be working as expected! You can perform a simple test to check: ping openbsd.org This should work - meaning your network is up and running! Now you’re free to enjoy the beauty that is OpenBSD.
Burning & Playing PS2 Games without a Modded Console 2024-09-02 Important: I do not support pirating or obtaining illegal copies of video games. This process should only be used to copy your existing PS2 games for backup, in case of accidental damage to the original disc. Requirements Note: This tutorial is tailored towards macOS users, but most things should work similar on Windows or Linux. You will need: An official PS2 game disc (the one you wish to copy) A PS2 Slim console An Apple device with a optical DVD drive (or a portable USB DVD drive) Some time and a coffee! (or tea) Create an ISO Image of Your PS2 Disc: Insert your PS2 disc into your optical drive. Open Disk Utility (Applications > Utilities) In Disk Utility, select your PS2 disc from the sidebar Click on the File menu, then select New Image > Image from [Disc Name] Choose a destination to save the ISO file and select the format as DVD/CD Master Name your file and click Save. Disk Utility will create a .cdr file, which is essentially an ISO file Before we move on, we will need to convert that newly created cdr file into ISO. Navigate to the directory where the .cdr file is located and use the hdiutil command to convert the .cdr file to an ISO file: hdiutil convert yourfile.cdr -format UDTO -o yourfile.iso You’ll end up with a file named yourfile.iso.cdr. Rename it by removing the .cdr extension to make it an .iso file: mv yourfile.iso.cdr yourfile.iso Done and done. Getting Started For Mac and Linux users, you will need to install Wine in order to run the patcher: # macOS brew install wine-stable # Linux (Debian) apt install wine Clone & Run the Patcher Clone the FreeDVDBoot ESR Patcher: git clone https://git.sr.ht/~bt/fdvdb-esr Navigate to the cloned project folder: cd /path/to/fdvdb-esr The run the executable: wine FDVDB_ESR_Patcher.exe Now you need to select your previously cloned ISO file, use the default Payload setting and then click Patch!. After a few seconds your file should be patched. Burning Our ISO to DVD It’s time for the main event! Insert a blank DVD-R into your disc drive and mount it. Then right click on your patched ISO file and run “Burn Disk Image to Disc...". From here, you want to make sure you select the slowest write speed and enable verification. Once the file is written to the disc and verified (verification might fail - it is safe to ignore) you can remove the disc from the drive. Before Playing the Game Make sure you change the PS2 disc speed from Standard to Fast in the main “Browser” setting before you put the game into your console. After that, enjoy playing your cloned PS2 game!
Perspective 2024-08-06 I recently read both Starting Hospice and No Salt posted on Jake’s blog and was quite moved. I don’t know Jake and have never met him - but his writing and shared experiences give a very real look into his mind and perspective. If you haven’t yet, I strongly recommend giving his site a read (or at the very least those two posts). It made me reflect on my own life, shift my perspective and realize how fortunate I truly am. Losing Focus I think we all find ourselves losing focus on the truly important things in life. That’s normal and expected. Maybe your house needs repairs, or you’re crunching for an upcoming deadline, or your prepping for a long a work trip, or your stressed out hunting for a job. Whatever it might be, our brains are very good at getting derailed and putting all our attention into less important things. But I believe our minds need to wander and focus on the less important. Otherwise your mental health would suffer greatly. And I should note, some of these “stresses” still require our attention. I just don’t think they should consume us. I’m not advocating that we need to constantly be obsessing over the limited time we have on this spinning rock, or that we should smother our families with over-the-top love. Just stopping and reflecting on these things can really put any worries you have into perspective. It might be cliche to state the obvious, “Be grateful for what you have!” but cliche or not - it’s true. Jake will be leaving behind not just his friends and family, but also his wife who is 7-months pregnant. I can’t begin to imagine the range of emotions everyone close to him must be feeling. I know I would be furious, which doesn’t make sense since something like this is so far removed from human control. Being angry would just be wasted energy. But that’s easier said than done. I don’t have a whole lot else to say on the matter. This post also pales in comparison to Jake’s actual experience and shared perspective on his site. I really wasn’t even sure to share this on my site, in fear that I would be somehow disrespecting Jake’s memory (along with his much better writing skills and openness). But then I thought, if anything, I could help reach Jake’s story to even one other person and help them reflect on their own perspective as well. Now if you’ll excuse me, I’m going to take a long, purposefully slow walk with my family.
Building rbenv on OpenBSD 7.5 2024-06-02 I use Ruby (specifically with Jekyll) for a lot of my clubs/projects while using my personal laptop (X220 ThinkPad) which is runs OpenBSD. Since I recently upgraded to OpenBSD 7.5 I thought it could be helpful for others if I shared my process of building and using rbenv to install different Ruby versions. Before We Build First, be sure to install the required packages in order to build from source, and then clone the core rbenv repo: pkg_add git gcc gmake libffi libyaml openssl git clone https://github.com/rbenv/rbenv.git ~/.rbenv Building rbenv Add rbenv to your PATH and initialize it (place this inside your .bashrc or .zshrc etc): export PATH="$HOME/.rbenv/bin:$PATH" export PATH="$HOME/.rbenv/shims:$PATH" export RUBY_CONFIGURE_OPTS="--with-openssl-dir=/usr/local" eval "$(rbenv init -)" Then reload your shell (zsh in this example): source ~/.zshrc Next we will need to install ruby-build as a rbenv plugin. Clone the ruby-build repository into the rbenv plugins directory: git clone https://github.com/rbenv/ruby-build.git ~/.rbenv/plugins/ruby-build Installing Ruby and Setting Our Version Now use rbenv to install the desired version of Ruby (we will get an older version for this example): rbenv install 3.3.0 If you run into issues, you may need to specify your openssl directory: RUBY_CONFIGURE_OPTS="--with-openssl-dir=/usr/local" rbenv install 3.3.0 If you’re on a slower machine (like mine) this might take a little bit. Just grab a coffee or a snack while you wait! Then navigate to your project of choice and set the local Ruby version: rbenv local 3.3.0 That’s it! If you’d prefer to set this version of Ruby for all projects going forward, simply replace local with global.
More in programming
Reading my recent computing retrospective, I realised there was a big section missing: the people in my life that made an impact and helped shape my career. Outside my immediate family, one person made an outsized contribution, and I’m fairly certain that without his influence my life would have taken a very different path. The fact that I’m still here in 2026, still writing code and being fortunate enough to have a career in something I love is testament to him. So I’d like to take a few moments to talk about my old secondary school teacher, George Dryden. Denied Back in 1995, I had a problem. I knew I wanted to study computing at university and build a career out of my passion, but there was a snag. For those unfamiliar with the UK schooling system, when you’re 15-16 you take a set of GCSE exams in a broad range of subjects. After that, you pick around 3 subjects to really focus on over a period of 2 years. These are called A Levels, and they are a big step up and are meant to prepare you for a degree-level course at university. Admission to university is also governed by these results - if you want to study computing, you’re going to need a computing A-Level, and most universities will only accept you (or “make an offer”) if you achieve a certain grade. And whilst I had taken computing at a GCSE level, my school did not offer a computing A-Level course. I instead had to settle on “Design & Technology”, which just didn’t inspire me. Instead of working on my portfolio and projects, I spent most of my time daydreaming and writing code on the Acorn Archimedes computers that were the staple of every 90s UK school. No disrespect to the teachers - they were all awesome - but it just wasn’t for me. I was miserable, and by the end of my first year, I was well on my way to failing outright with my entire future plans seemingly going up in smoke. Someone noticed That’s when George stepped in. He’d taught me computing right the way through my GCSEs, and with no A-Level course on offer, that was officially where his involvement was supposed to have ended. It didn’t. He had noticed my constant presence in the computing labs - before and after school, during lunch breaks, free “study” periods - working on some little pet project or digging into RISC OS internals. I remember him as warm, with a wicked, dry sense of humour, and a refreshingly spiky attitude to authority - I always got the sense he’d worked out for himself which rules were worth taking seriously and which ones weren’t. And he always had time for me. I spent years pestering him with questions that had nothing to do with anything on the syllabus, and he’d always find a way to answer them that actually made sense. He was just as supportive of my odd little obsessions. At one point I’d got deep into the BBS scene, which I thought was the coolest thing ever, and decided what the school really needed was an internal BBS running on its own network. So I wrote one. It was deeply cringeworthy, obviously - but George helped me put posters up around the school advertising it, and even gave it a mention in assembly one morning. I think about five people in total ever checked it out. It didn’t matter: a teacher had stood up in front of the entire school and treated my weird little project like it was worth something, and that was a hugely validating moment for me. Off the books He recognised the passion, and eventually he made a suggestion: What if I quit the Design and Technology course, and instead attempt the A-level course myself? Personally, I also suspect he was enjoying himself. There was some internal school politics behind why computing wasn’t offered at A-Level in the first place - I never knew the details - and I think the prospect of one of his students simply going out and getting the qualification anyway appealed to him on two separate levels. It would get me where I wanted to go, and it would wind up exactly the right people. It wouldn’t be easy, he warned. The school would be against it, plus it was a two-year course which I’d have to cram into one year. I’d have to do it all myself - studying, lesson planning, coursework - he couldn’t help me in an official capacity, but he said he’d advocate for me and help where he could. If I had assignments, he’d send them off to be graded and would give feedback in his own time. He’d enter me in for the exams and also gave me a set of keys to the computer lab so I could use it whenever I needed. It was the first time anybody outside my own family had really shown faith in my abilities and encouraged me to take a stand. It was a pivotal moment for me - I realised if I wanted something badly enough I would have to fight for it, but I could still make it happen. I didn’t have to take “NO” for an answer - a lesson I think I picked up from watching him as much as from anything he ever actually said to me. After a few weeks of dithering, I took the jump. I remember a few awkward meetings with the school administration but thanks to his behind-the-scenes work, I was soon following my dream. An intense year And yes, it was bloody hard work. I had to condense an entire two year course into under a year, be disciplined enough to produce my own study plan, and be critical enough of my own shortcomings that I could focus my study where it was needed. I pretty much lived and breathed it for months straight and was more-or-less a permanent fixture in the labs or school library poring over my course books. I’d make lists of questions and chat to George over lunch, and he’d provide guidance and encouragement. It was a lonely way to learn with no classmates to compare notes with, no lessons to turn up to, and right up until the end I had no real idea whether any of it was good enough - but bit by bit, it started to feel like something I could actually pull off. And sure enough, in the late spring of 1996, I sat down in an exam hall with my fellow students, the only one with an A-Level computing question paper in front of me. The final exam went by in a blur - I can only remember a few of the questions now (and a peculiar obsession with the Pascal language) - but I do remember the euphoria as the invigilator called “time’s up, pens down, close your papers NOW”. I had done it. A few nerve-wracking months later, my Mum drove me into school to pick up my results. I ripped open the envelope and saw it - I’d passed with an A grade! I literally ran up the stairs to George’s office next to the computing labs to thank him personally. I’d taken my camera into school to take a few last photos for memory’s sake and snapped this photo of him before I walked out the school gates for the last time: A different path Because of him, I managed to get into my university of choice, studying computing with a focus on networks. Because of that, I landed my first job working as a “webmaster”, and my career since has been one of the highlights of my life. All these years later, it’s a real privilege to be able to get up each morning and actively look forward to working in an industry I love. Without George stepping up for me and encouraging me to believe in myself, none of that would have happened. I wouldn’t have had the career I have, and I wouldn’t be where I am now. I met my wife when we both worked at a software company - she sat at the desk behind me - so even my home and family life can be traced back to that spring of 1996. And the A-Level itself was only half of what I took away from that year. The qualification opened the door to university, but the lesson that came with it was every bit as important: that a “no” isn’t always the end of it, and that sometimes the answer can be argued with. I’m so proud of what I managed to achieve all those years ago, and even more thankful to have had someone like George in my life to put me on the right track. Mr. Dryden I did see him again after I left. He drank in one of my local pubs - a pub I’d been going to for a good while before I was technically old enough to be in it - and I’d say hello if I spotted him in there, mostly in the months before I moved away to university. After that it was only a handful of times. For years I’d find myself scanning the room whenever I was back home and in for a pint, half expecting him to be at the bar. At some point I stopped seeing him altogether and eventually moved across the country. The trouble was I never really knew how to talk to him outside of school. He was always Mr. Dryden, or just “Sir”, I don’t think I ever once called him George to his face! I was (and still am if I’m honest) fairly socially awkward, and I never worked out how to phrase the thing I actually wanted to say: that he had changed the entire direction of my life, and I wasn’t sure he knew it. So instead I’d say hello, and ask how he was, talk about nothing much, and go back to my friends. Epilogue Sadly, 3 years ago now, I opened the latest issue of my old school alumni newsletter to read that he’d passed away. The photo at the start of this article was taken from his obituary article and I read that he’d had a long illness and had suffered from dementia at the end. I did write to him years ago by email - I don’t know if he ever got it, or was in any capacity to understand what he’d done for me, but I hope so. There’s an old saying by one of my favourite authors (Terry Pratchett) that “no one is finally dead until the ripples they cause in the world die away”. In one of his books, a character keeps the memory of his son alive by passing his name along a series of telegraph towers. It’s in that spirit that I’m writing this post - I debated it for many years as it’s very personal to me and I also have no contact with any of George’s family so I have no idea what they would make of it all. But even though it’s 30+ years ago now, I will never forget him or what he did for me - and at least now, if someone searches his name it’ll be recorded here for as long as I’m alive and running this site. Thank you, Sir. George Dryden 1942-2023
Let’s step inside the kernel and understand how it implements copy-on-write and what are its implications for the performance of user-space systems
Yesterday, I received this email as a response to You Can't Vibe Code Love. It's such a remarkable and powerful statement that I asked permission to share it here, in its entirety, with personal information redacted: Hey Jeff, Hope you and your family are doing well.
A frustrated Reddit post about being a condom between an AI and production made the rounds in our team. Here is why I think the opposite is true and what it means for how we review code, plan work and think.
And here we are three years after I wrote about the Google Pixel Fold being announced, followed now with the announcement of the iPhone Duo...(I have questions about the naming by the way). Four years ago I was talking about web primitives in the platform for the Surface Duo. My how time flies. There are CSS media features, a Viewport Segments API, a Device Posture API but Chromium based browsers are the only ones currently supporting these things. I haven't been able to find any signal yet on whether Safari will support these things in the web platform as the developer docs focus on application development. If you're interested in trying out the platform features, you can emulate the Surface Duo and Galaxy Z Fold in the developer tools. And if you're thinking, do I really have to have my website adapt to two screens? The answer is no. Adding a design to an application or dual screen makes sense if you have an experience that has two simulataneous contexts that are useful e.g. a list of email messages/inbox on one screen, an open message, email thread or email composer on the other. Here's one of my talks from 2022 if you're interested in learning more about what's available in the browser for dual screen/foldable devices. Happy building :)