Full Width 
Shortcuts 
Sign Up 
Log In 
Articles 
Reading List More from Ian Betteridge
There are plenty of objections to preventing Elon Musk from donating to Reform. The first is it’s politically motivated. A party shouldn’t (the theory goes) use its power in government specifically to target another party. Of course, Labour could do this in a way which prevented all foreign donations to all parties, and thus side […]
This week… But first, an announcement! TLDR: Over the holidays, I will be migrating this site from WordPress.com to Ghost. This may mean a little disruption, but I’ll try to keep it to a minimum. Why am I doing this? I’ve been a paying customer of WordPress.com for my site hosting for several years. I […]
1. Tech benevolent dictators are still… dictators in the tech community there is a concept of the “benevolent dictator for life”. This is a leadership model where one person, usually the founder, has the final say on decisions. They guide the project’s direction, relying on their expertise and vision to keep things on track, while […]
More in creative
Plus: Elon's fake numbers and a Good Shrek Prediction
Really? Which self? The self you were when you were two years old, almost out of diapers? The self you were when you were screaming with the fans at the big game? The self you were after a long night? How about this: Become the self you’d be proud to be. Hang out with people […]
Monoprinting using an open screen is a wonderfully creative way of using your screen printing equipment for speedy, painterly prints. Neocolor Pastels are a great material to use when mono screen printing - you can draw directly onto the mesh and print your drawing through the screen. A 90T screen is ideal for printing onto paper. Arranging your screen on a hinged board helps you to register your prints, whilst holding the mesh the perfect distance from the paper when printing. We're printing onto cards, just in time for Mothers' Day! With the screen on a hinged board, lay something small under one corner (like a pencil) to hold the mesh slightly further away from the board underneath. Use the NeoColor pastels to draw directly onto the open mesh screen. We have used parcel tape on the back of the mesh to mask out an area an appropriate size for printing onto a card. You don't need to fill the whole mesh area if you don't want to. When the design is finished, apply a well of Acrylic Screen Printing Medium above the design. Use a squeegee at a 45 degree angle to push the medium through the mesh and on to the paper underneath. On the first print, some of the pastel may act as a resist, giving you interesting marks and textures. Some pastel will remain in the mesh, so print again onto another piece of paper to get another print. Each one will give a slightly different strength of colour and texture. If you're using the same medium to take a print each time, it will become muddy with the colours from the pastels, giving a coloured background - you can either embrace this, or replace the medium on the screen regularly. When you're finished with the design, wash it off with a soft sponge and cold water. Wait for the mesh to dry, and then go again with a new design! For this project you will need: Neocolor Pastels 90T screen Hinged Board and Hinge Clamps Squeegee System 3 Acrylic Printing Medium Spatula Paper to print on - we used cards Soft Sponge to clean
