Full Width [alt+shift+f] Shortcuts [alt+shift+k]
Sign Up [alt+shift+s] Log In [alt+shift+l]
1

Rebuilding a 1995 GPS Time Server so I don't get Telstra'd

from Jeff Geerling [alt+shift+b] in technology

In June I purchased this TrueTime XL-AK time server, so I could learn more of the history of GPS-based time. I received it on June 22, and just 16 days later a similar GPS time server took down Australia's cell service for 12 hours! I made a short video about it but put off digging into the TrueTime... until now. Over the past couple weeks, I've 'restomodded' this device with a Raspberry Pi, to build a stratum 1 NTP Time server, which I'd like to eventually add to the NTP Pool. I found a way to drop in a Pi 5 and GNSS HAT, display the time and GPS status on the built-in 16x2 LCD, show the status on the bicolor LED, and make this box useful again.
4 weeks ago

Stay updated

Get a weekly newsletter with the top 5 articles worth reading every week.

More from Jeff Geerling

Proxmox officially supports Arm, with some caveats

Proxmox today announced their Proxmox Virtual Environment is now available for 64-bit ARM. I tested it on my Ampere Altra Dev Platform—the same machine on which I've booted Windows on Arm the first time, messed with multiple GPUs, and most recently tested Houdini's native arm64 support. Install was easy, as the Ampere Altra uses UEFI / ACPI for its hardware, meaning Proxmox didn't have to tailor it's ISO to specific platforms, like you have to do with Raspberry Pis and most SBCs using a Device Tree setup.

5th Aug 2026 • 1 votes
I tested every IP KVM in my Homelab

Since the PiKVM came out in 2017, there's been an explosion of IP KVMs. I've tested almost every one. But what are they good for? You can use Remote Desktop, Screen Sharing, or VNC to remote control a computer from anywhere on a LAN. And if you don't have a private VPN, you could use RealVNC, Raspberry Pi Connect, or wire up Tailscale or Pangolin for fully remote access. Those solutions are great, and so is SSH if you don't need a full desktop.

5th Jun 2026 • 1 votes
SBC Clusters are a terrible value, but they're fun anyway

Pictured above is the new DeskPi Super4C installed in an 8U mini rack. The Super4C is a 4-node Raspberry Pi CM5 cluster board that solves two pain points I had with the older Super6C. I was testing this board around the same time I helped kick off the SBCC 2026, the Single Board Cluster Competition for students. A dozen or so university teams squared off to run the best mini HPC cluster with a budget of $6,000, and a couple days to benchmark six HPC workloads.

1st May 2026 • 1 votes
DRAM pricing is killing the hobbyist SBC market

Today Raspberry Pi announced more price increases for all Pis with LPDDR4 RAM, alongside a 'right-sized' 3GB RAM Pi 4 for $83.75. The price increases bring the 16GB Pi 5 up to $299.99. Despite today's date, this is not a joke. I published a video going over the state of the hobbyist 'high end SBC' market (4/8/16 GB models in the current generation), which I'll embed below: .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } But if you'd like the tl;dr:

1st Apr 2026 • 1 votes

More in technology

Computational tools for society’s most complex challenges

Associate Professor Cathy Wu uses reinforcement learning to help map out improvements to transportation and other multifaceted systems.

21 hours ago • 1 votes
Two more 27.0 design grumbles

After living with Apple’s 27.0 OSs since launch, I have some more annoyances to get off my chest. This time, it’s all about how tabs and menus have gotten worse. I’ve already ranted about the Liquid Glass material in general, but these two design changes in particular have really been grinding my gears. I’ll reiterate that Apple’s latest OSs look substantially nicer to me than the previous set… but that only makes these setbacks more glaring. Also, many of these issues aren’t nearly as bad in light mode — but I use dark mode exclusively on all platforms. Apple offers this appearance setting, so I think it’s fair to criticize them when it’s not holding up. First up, let’s talk tab bars. I think these looked awful in the original Liquid Glass redesign, and in 27.0 they look even worse. Below is an example of three tab bars from Safari in macOS. All of them are in dark mode. The top example is from macOS 26 with the “clear” Liquid Glass setting, the middle is macOS 27 with the default (mid-slider) version of Liquid Glass, and the bottom is macOS 27 with Liquid Glass at its most tinted. In each, the middle tab is selected (though I think the word “tab” is being quite generous to these globs). In macOS 26, there was practically no difference between the clear and tinted versions of tabs. Similarly, the clearest and default/middle tabs in macOS 27 are effectively the same. Because of this, I’m leaving out the redundant examples. Even though I still think it’s ugly, I vastly prefer the macOS 26 version of these three options. It offers the most contrast, and it makes more sense in dark mode: the background is darker and the foreground of the active tab is lighter. The middle example is what tabs look like in the default (mid-slider) version of Liquid Glass in macOS 27. There’s now only a very faint outline around the active tab, and practically no difference in background colours. To me, this is unreasonably subtle. The effect is even worse when there are a lot of tabs open. Lastly, there’s macOS 27 with the fully tinted Liquid Glass setting. It’s better, but it still looks less correct to me than the tab design from macOS 26. It’s difficult to put into words how much I loathe the look of this new tab bar design. I don’t mind the more “bubbly” look of Liquid Glass throughout the 27 OSs for the most part. It gives UI elements more dimension than in the 26 OSs. But it doesn’t work for tabs. Because the bubbly look is inside a trough, the active tab’s glass effect ends up looking like a blur on the top and bottom. This reduces contrast further and makes the active tab harder for me to pick out. Even in dark mode with full tint, I find the active tab less visually clear than in 26’s clear mode. Now, I’m sure there are at least a few people reading who don’t see what the fuss is about. If that’s you, I assure you that the difference is more stark when you’re not comparing things side by side. It’s not impossible for me to pick out the active tab, but I think it’s trickier than it needs to be! But, if you still don’t believe me, here’s a little experiment. Which of these do you think is most legible? The text/background colours in the above image are based on the foreground/background colours used in the tab bar instances above. First is clear in macOS 26, then the default from macOS 27, then fully tinted in macOS 27. I think they’re all pretty awful, but I prefer the macOS 26 clear version. Again, this is because I’m using dark mode. In dark mode, light text appears on a darker background. Similarly, active UI elements have a lighter background than their surrounding elements. I’m sure there are counter-examples, but this is how just about everything else works in Apple’s own apps! It should be noted that Safari uses the system default tab bar design. I also see this design in Apple’s Terminal app, in Pixelmator Pro, and elsewhere. I don’t use Xcode daily anymore, but you’ll also find them there — though in true Xcode fashion, they’re ever so slightly nonstandard and also don’t respect your tint setting. Below is a screenshot of Xcode using my current settings of dark mode with fully tinted Liquid Glass. Up next: menus. Below is an image showing four versions of the same menu in macOS. Top left is macOS 26 clear, top right is macOS 26 tinted, bottom left is macOS 27 default (mid-slider), and bottom right is macOS 27 fully tinted. It’s a similar story here. In macOS 26’s dark mode, I had no problem with system menus even when Liquid Glass was set to clear. In macOS 27, even in the fully tinted mode, the menus have much lower contrast. They also now lose all of Liquid Glass’s refractive effects when at their most tinted. I think this is less of an issue than the tab design changes, but it’s still a downgrade. Again, I’m certain many people don’t care about this. Some might wonder why I’m not turning on accessibility settings to help with these things, if they bother me so much. I’ve flirted with this (especially the “Increase Contrast” setting), but those settings have many knock-on effects. 1 But honestly, I don’t think accessibility settings should be required to have a reasonable amount of contrast in a design system. Maybe Apple disagrees, but I really hope more dark mode tweaks are coming. The “Increase Contrast” setting is under System Settings -> Accessibility -> Display -> Increase Contrast. Interestingly, you can use this setting along with the clearest version of Liquid Glass to almost get back to how things looked in macOS 26’s version of tinted. However, it adds contrast-y lines around many UI elements that I find extremely distracting. It also alters colours on some elements to, strangely, make them less contrast-y. It feels unevenly applied and poorly implemented in several apps. ↩

yesterday • 1 votes
Does AI exacerbate English-language inequality?

It’s an empirical question!

yesterday • 1 votes
The 2030 Census is in Trouble

Trump wants to add a citizenship question and ban questions on race

yesterday • 1 votes
Make tmux the OS

I recently watched the talk by Scott Jenson titled "Are we really going to use the same Desktop UX forever?" https://www.youtube.com/watch?v=V7AfAcQwLW0&t=445s. He's a great presenter, really articulate and concise. The kind of speaker that you'd

yesterday • 1 votes
📚 BoredReading

You seem to be enjoying this.

Join free to unlock everything.

Create free account

Already have an account? Sign in