Full Width [alt+shift+f] Shortcuts [alt+shift+k]
Sign Up [alt+shift+s] Log In [alt+shift+l]
1

Cooking with glasses

from Tom MacWright [alt+shift+b] in programming

I’ve been thinking the new Meta Ray-Ban augmented reality glasses. Not because they failed onstage, which they absolutely did. Or that shortly after they received rave reviews from Victoria Song at The Verge and MKBHD, two of the most influential tech reviewers. My impression is that the hardware has improved but the software is pretty bad. Mostly I keep thinking about the cooking demo. Yeah, it bombed. But what if it worked? What if Meta releases the third iteration of this hardware next year and it worked? This post is just questions. The demos were deeply weird: both Mark Zuckerberg and Jack Mancuso (the celebrity chef) had their AR glasses in a particular demo mode that broadcasted the audio they were hearing and the video they were seeing to the audience and to the live feed of the event. Of course they need to square the circle of AR glasses being ‘invisible technology,’ but showing people what it does. According to MKBHD’s review, one of the major breakthroughs of the new edition is that you can’t see when other people are looking at the glasses built-in display. I should credit Song for mentioning the privacy issues of the glasses in her review for The Verge. MKBHD briefly talks about his concern that people will use the glasses to be even more distracted during face-to-face interactions. It’s not like everyone’s totally ignoring the implications. But the implications. Like for example: I don’t know, sometimes I’m cooking for my partner. Do they hear a one-sided conversation between me and the “Live AI” about what to do first, how to combine the ingredients? Without the staged demo’s video-casting, this would have been the demo: a celebrity chef talking to himself like a lunatic, asking how to start. Or what if we’re cooking together – do we both have the glasses, and maybe the Live AI responds to… both of us? Do we hear each other’s audio, or is it a mystery what the AI is telling the sous-chef? Does it broadcast to a bluetooth speaker maybe? Maybe the...
21st Sep 2025

Stay updated

Get a weekly newsletter with the top 5 articles worth reading every week.

More from Tom MacWright

Cycling Vermont

In October I rode the Green Mountain Gravel Growler route in Vermont with a few close friends. It’s a route curated by bikepacking.com that consists of back roads, dirt roads, and single track trails. It wasn’t as blissfully car-free as the C&O Canal or the loop around Lake Konstanz that I rode earlier this year, but in exchange for sharing the road occasionally, we got loads of variety and beautiful hills to climb up and coast down. As the name implies, the route is structured around breweries. We only did half because vacation time is scarce, but still managed to hit some good ones. The first night’s, in Burlington, was Foam Brewers. I had the “Tally Mark” altbier, which tasted like a cigar, in a good way. We didn’t get much time to explore Burlington. We did see the world’s tallest filing cabinet. The first day of riding was from Burlington to Stowe, with stops at The Bidwell for food, The Tropic for a mid-ride drink, and ending at The Alchemist. About 50 miles, and 3,700 feet of climbing. Places like The Alchemist are impossibly nice: sunshine, babies and puppies crawling in the grass, happy people playing corn hole. The delirious happiness of finishing a long day in the saddle makes it all even more saturated and exuberant. I was feeling pretty good on the bike, most of the ergonomics were working. The only gear tweak that this trip will inspire is sticking to fancy cycling bibs (shorts): Ornot, to be specific, instead of trying to scrape by with the cheap stuff, which for me is The Black Bibs. The Alchemist’s “Heady Topper” is like drinking a flat white made out of hops. .up{display:grid;grid-template-columns:1fr 1fr 1fr;gap:10px;line-height:0} Weather was perfect for almost the entire trip, and the route was pretty clear and empty. We mostly encountered locals riding casually, casually passing us on the way up some big trail. Vermonters are strong riders. The second day would be about 44 miles of riding and well over 4,200 feet of elevation. At this point everyone was feeling it: we’re New Yorkers and a lot of the biggest rides up till this point have been pretty flat. The total elevation change for the C&O Canal ride we did was 605 feet over 185 miles. Riding Bear Mountain and the Goldens Bridge loop helped with training, but nothing near the city can match the relentless climbing in Vermont. I expect hills to crest when there’s a turn in the road, but Vermont doesn’t follow that rule. But, every hill ends eventually. I only had to walk up one, and that was because it was so steep that I couldn’t get traction and not wheelie at the same time. To make this all easier, we weren’t camping at all, just staying at nice places and sleeping in real beds. With the quickly changing weather, camping in the cold would’ve been pretty tough. So that meant more room for changes of clothes and creature comforts. Places to stay in Burlington, Stowe, Hardwick, and Montpelier are pretty scarce though, and tended to be at the very top of hills. Seemed like everything was at the top of the hill, especially… Where The Alchemist was a casual, hippie-inflected destination, Hill Farmstead was like an elusive vineyard that happened to brew beer. And it’s at the top of a hill, of course. Like everywhere else, there were a few other people who had also biked to the hill, and lots of families, dogs, and fleece jackets. They had a food truck outside which whipped up an excellent, fairly spicy vegan burrito for me. Timing for this trip was tight, and rushing to arrive at a brewery before close had a kind of reality-TV greatest race feel to it. We were going to Hill Farmstead on a Sunday, and their hours on Sundays are 11:30-3pm. They close at three! And they don’t re-open, that’s just it. The rest of the week the bar closes at 5: it’s an exclusively day-drinking oriented outlet. But we made it, and made it to Hardwick, where the local Positive Pie location had a spectacular beer selection and surprisingly vegan-friendly menu. This was my first time in Vermont, encountering its specific brand of rural living. Many people were so open and welcoming to us, asking about the route and complimenting our endurance like proud parents. This, even though it was nearly peak tourist season and they probably get plenty of other people following the same directions. One stop in particular, sticks in my memory, the Maple Corner Community Store. If you look at the full span here: this place is a grocery store, deli, coffee shop, live music venue, bar, as well as the post office. Plus it has a little free library out front, and carries a selection of books written by local authors and signs for plays written by local playwrights that are performed nearby. It’s hard to even comprehend the level of integrated community-hub joy in this place. And, for me, they had a world-class selection of vegan snacks. The few odd interactions with Vermonters were all about land: their private land, and that we should stay off it. Not that we ever were on it - we were staying in houses and riding on public roads. But still we got reminded not to veer off and ride through apple orchards or lawns. In one sense this is a funny inverse of cities, where people control such little territory, but here the average homeowner has acres upon acres. But land rules in Vermont are very unusual: the constitution allows people to hunt, fish, and trap on other people’s private land unless it’s posted that the land doesn’t permit it, and the rules around posting are contentious. I’d be watchful too if people could just hike to my backyard and kill a deer. Then we were headed back on the Amtrak from Montpelier. It’s such a perk to be able to do this kind of trip without renting or using a car at all, just riding to and from train stations. Amtrak’s train ticket guarantees a spot for the bike, but it is always stressful and rushed getting bikes on & off. We only completed the first half of this trip - Burlington-Stowe-Hardwick-Montpelier, so there’s another Vermont trip in the future. Maybe next year! It was really spectacular. The hills were tough, but it was all worth it.

2 weeks ago • 1 votes
Recently

September was another big month for my life, mostly for me offline. Another good month for bicycle riding, seeing more of the trails on Randalls and Wards Islands. The New York area has taught me a few things about islands and one of them is that they're very fungible. On a map, Randalls and Wards Islands look one one island because they're "conjoined". They were conjoined on purpose: they used to be two, with a bridge and everything. But then in 1955 the government announced they wanted to join up the islands "by allowing private contractors to dump debris within Little Hell Gate for free" (!) Photo from From City of New York Department of Parks: 28 Years of Progress, scanned by Erica Fischer (!) CC BY SA 2.0 The opposite happened with Fire Island: it was one island for a while until 2012, and Hurricane Sandy broke it back into two. Photo from USGS, PD Dump trash to combine islands, dump water from the sky to divide them. That's just how life is. .two-up{display:grid;grid-template-columns:1fr 1fr;gap:10px} Listening I watched Magnolia this month and finally got the hype around Aimee Mann. It's a little frustrating that the songs from the film aren't on And a throwback: Dusty Springfield's version of When the Love Light Starts Shining Through His Eyes. Originally recorded by the Supremes and forgive me for highlighting the blue-eyed soul version of this song but it's so driving and urgent in a way that most of the other versions aren't, it's such a good slice of that very particular rushing rhythm of the era. Reading On a meta-level: I'm getting pulled back to Instapaper from Readeck, because I rely on offline reading so often and unfortunately the Readeck iOS offline mode is unreliable. It is open source and I should contribute and in all likelihood the issue will get fixed, but in the meantime I need something to look at on the subway. Reading: I enjoyed Spiral's launch post a lot, as well as turbopuffer's post about their refactoring. Database companies in the AI-adjacent space are a nice hybrid kind of reading, still concerned with architecture and a little more grounded than a lot of the "big idea" or marketing-centric stuff that I read from AI labs. I also liked Charles Broskoski's "Personal Business" essay (one of the are.na founders). And I've been really liking reading Work by Bud Smith. Review of that soon. Otherwise The end of October will be even more packed than September for me, so if I don't post, don't worry, I'm not dead, I'm partying.

1st Oct 2026 • 1 votes
Recently

I skipped August's Recently because this summer has been relentless, mostly in the positive sense. July and August were filled with bike rides, 5K races, friends in town, life changes and logistics. For a friend's birthday, we rode the rickety Coney Island Cyclone, which was faster and more intense than I remembered it. But it's been 18 years since the last injury on the coaster, and the rider was partly at fault: good enough for me. .two-up{display:grid;grid-template-columns:1fr 1fr;gap:10px} I rode my first proper randonneuring ride: 200km (124mi) to all of the beaches around Brooklyn. It was pretty challenging, as you'd expect, but I didn't 'find my limit' for endurance, but I did find my limit in terms of how many gels & ride-nutrition packets I could consume before sugar becomes repulsive. I do still heartily endorse maple syrup packets for ride nutrition: compared to the space-age fuels that all taste like fruit or coffee, it's an identifiable substance that tastes like you'd expect. And, not pictured, but I ran a bunch of 5Ks. Haven't hit my goal this year of going sub-20, but got close in the last one - 20:15. I'm not giving up yet, because the weather is getting better and Brooklyn has a lot of 5K options. Listening Hot Creek by Duffy x Uhlmann Duffy x Uhlmann has been in my rotation for a year now and the new album has all the things I like from the combination. This and Shrunken Elvis go along well together and both have been hits at dinner parties. This album from Frances Quinlan, the frontperson of Hop Along, went under the radar, but it's so good. I've also been playing Hop Along's send album Get Disowned. I really like everything that this band has put out. It's a product of Philadelphia but I hear some of the elements that drew me to DC post-punk in the turn-on-a-dime songwriting. Get Disowned by Hop Along Watching This video, 'The surprising truth about what motivates us', is kind of an artifact of the 'Obamaverse', as one of my friends would put it. It's by Daniel Pink, a writer-speaker-self-help kind of guy, and it's accompanied by one of those realtime hand-illustrations. There are lots of reasons to tune it out as YouTube filler. Still, I thought it was pretty cool for two reasons: first, it connected directly with Andrew Kelley's video, which is the next one. And it connects with my feelings about incentives and how most simple incentives are counterproductive. And second, the drawing is real. I'm so used to the artificial version of this visual style that it took a minutes to realize that the it wasn't AI or some 'drawing hand' style of video essay, it was a real person making quite nice illustrations: specifically Andrew Park. Found myself nodding along to every bit of this interview with Andrew Kelley. His values and motivation are so nice to encounter in this current phase of tech. He's kind of a role model, which is something that I used to find trite in my early career but I'm coming around to. As Adam Neely pointed out in his video, a lot of the people heavily using Suno (an AI music tool) could not cite any role models, and defaulted to a sort of enclosed, self-centered stance. I see this with engineering too: it's hard to discern what values or talents the people at 'the forefront of the industry' have that I want. Finding personal qualities as something to imitate instead of desires and possessions (cue the segue into Girard's Memetic theory) seems like a better way to live. Reading What strengthens a relationship? Almost always, it is personal investment. Perhaps an AI agent might be better at predicting what my father will want for his birthday than I am, but it definitionally cannot give him my time and consideration. Love is not just a feeling; it is a way of paying attention. Elizabeth Lopatto in The Verge picks apart Mark Zuckerberg's weird, sad view of humanity. It's worth a read even just for the incredible opening anecdote. Home of the titular 100 foot waves. Which existed when I was a kid of course, but the larger world didn’t know about them yet. They were our secret. My grandfather and I would walk to the lighthouse and watch the waves hitting against the cliffs and he’d tell me that these were the biggest waves in the world. I didn’t believe him, of course. I thought it was standard grandpa hyperbole. But I also didn’t want to believe that I was seeing the biggest of anything. Not yet. I wanted the really great things to be in the future. Something to aim for. Which means I missed out on some great things that were right in front of me. Mike Monteiro's newsletter is always beautiful and melancholy, and this is a really nice edition of it. I read and highlighted a few other articles but they were all saying things about AI, mostly about how it makes the world worse and makes people feel bad. I won't add those to the pile because I don't want that kind of content to dominate what I mention, even if it does dominate what I read. Elsewhere For the Val Town blog, I wrote about our experience with the bug bounty program. It's been a very interesting experience. Val Town has a pretty difficult security surface: in contrast to Mapbox, which was mostly a read-only API, it's a very read-write system with many access controls. At the center of the product is a sandbox that we want to keep secure. And because we're living in the AI age, a single bit of functionality can be exposed via REST API, React Router loaders, tRPC, and MCP. Building a model layer and a shared authorization layer - modeled after Oso - has helped a bit. But the reports still come in. It's pretty wild how AI factors into it: I'd say that 100% of the vulnerability reports used AI to write the report itself. From the best reporters, the vulnerabilities come with screen recordings and evidence, and it's clearly not all-robot. But - I suspect that other people manning help desks & bug bounty programs know this experience - it's jarring to go three replies into an email conversation with someone and they suddenly stop using an LLM to write their emails and the voice completely changes, from hyper-literate to abbreviated and misspelled. I also wrote about our new authentication scheme that makes vals require login and makes it possible to manage permissions to val applications, not just their code. It was pretty fun to implement, and the sixth or seventh time working with HMAC schemes I'm starting to get a natural grasp on them.

1st Sep 2026
Technology optimism hour

Back in 2022, I wrote Web technology optimism hour, highlighting the things I thought were cool about the state of technology. Time flies. Let's do it again. It's still easy to be pessimistic, but it's nice to mine your feelings for the positive ones. The elephant in the room is AI, but I don't feel like throwing another post into the gravity field of that topic. Without further adieu: TypeScript 7 It's here, finally, and it's faster. In the last edition, one of the headings was "Rust and Go based tools are making TypeScript development faster." At that point we had a few upstart projects for minifying, transpiling, and bundling TypeScript. Those tools have become standard-issue. But TypeScript, the actual type-checking of the language and the language tooling in editors, was still a bottleneck. There was exactly one implementation of the TypeScript type checker, and it was implemented in TypeScript, so it ran at JavaScript speeds and had limited ability to become multi-threaded. Unfortunately there's still only one game in town for TypeScript type checkers: it's still just Microsoft. But they rewrote TypeScript in Go for TypeScript 7 and it's much, much faster. This is one of the most noticeable changes to my day-to-day coding in a while. Plus, even better: TypeScript 7 supports the Language Server Protocol! As I wrote about in 2024, Microsoft invented TypeScript and also the Language Server Protocol, but TypeScript never implemented the Language Server Protocol. So there was no standard way for other editors, other than Microsoft's VS Code, to provide language tooling for TypeScript. This was suspicious behavior because of the company's history. But now: it just works. Neovim can support TypeScript 7 with its built-in Language Server support instead of someone wrapping the VSCode extension in an LS-protocol shell. So: a big win. Hooray for the new TypeScript: it's faster, it supports open standards, and now there are two TypeScript implementations. Now all we need is one that's made by someone who doesn't work at Microsoft. The Effect ecosystem is exciting I've been writing little development logs about Effect over the last year or two. I'm excited about Effect. It's a big, all-encompassing system, but I think it has a lot of potential and is arriving at exactly the right time. This is an era of supply-chain risk and I think there is, and should be, a swing away from the tiny module ecosystems in NPM. Software that's composed of hundreds of little modules from hundreds of authors is a lovely idea that doesn't work with malicious actors. The swing is toward larger, buttoned-up libraries, and Effect is really well-positioned for that. It has type validation, observability, state management, fancy data types, and lots of functional programming helpers all under one roof, in one package that's pretty well-maintained and heavily tested. It's also very, very typed, which makes it safer to use at scale. And it makes limits a lot easier: you can just stick an Effect.timeout on anything and prevent network requests or database queries or anything else from taking too long. The same with concurrency, it's very easy to limit concurrency. It's ready for a very uncertain world where you have to validate and be careful about everything. But at the same time, it's fun to use, if you're that kind of person, which I am. Bluesky and Mastodon are successful, meaningfully decentralized systems I use Bluesky and Mastodon all the time and both just work. They don't feel like tech demos, it's not all nerds using them. The uptime is pretty good, the featureset doesn't seem limited by the technology choices. And yet both are legitimately decentralized (in different ways) networks, with really interesting ideas about security, privacy, and community systems. Bluesky is aggressively building out its protocol as an independent technology from the social network, and as I learned at their conference, there are lots of creative people building on the technology. There's a big gap between a cool tech demo and a user-friendly popular service, and both of these have bridged it. It's exciting, and shows that you don't have to accept a bad set of tradeoffs to make tech that's both principled and popular. Signal, WhatsApp, iMessage, and RCS are meaningfully secure messaging platforms I want to just celebrate the end of a technology: SMS. It's so good that people don't use SMS anymore: it was needlessly expensive and extremely insecure. My texts with friends are almost exclusively on Signal & iMessage, and occasionally WhatsApp. Now, WhatsApp is a mixed bag and nothing's perfect, but it's cool that the secure options recommended by the EFF and other sources are also popular options that people use every day. That's also pretty important from a privacy standard: having Signal installed on your phone is normal because it has a wide userbase, but the same would not be true if it was only used by people attending protests and being wary of government surveillance. Hardware update cycles are slowing People are hanging on to their phones and computers for longer. I'm part of this trend - my iPhone hit its fourth birthday, and I have no reason to even think about replacing this computer. With the exception of their batteries, modern laptops and phones are robust: they're water-resistant, made of durable materials, and basically just work. You could read the same data differently: maybe people are upgrading slower because they have less disposable income. I'm not sure that's true. But either way, it's good that upgrade cycles are longer: it means less e-waste, less pollution, less churn overall.

14th Aug 2026 • 1 votes
Recently

June was a big month: I went to Porto & Lisbon, and had a lot of life stuff happen. I'll get into the trip once I get my rolls of film developed. Three rolls at a new photo developing place: fingers crossed! Reading I finished reading Intermezzo (of the bag) and it was fantastic. I've always liked Sally Rooney's books but this was the one where the writing style really clicked. Also, The Vegan. Meh. I read Patricia Lockwood's 'A Tradcath Wedding' via Perfect Sentences but found an additional sentence to be perfect: Whenever they rang the chimes, which seemed to be every four seconds or so, a toddler screamed ‘WOW A BELL!’ to the visible displeasure of the celebrants – though isn’t the entire point of the ritual that you’re supposed to be that awestruck every time? Patricia Lockwood is the funniest writer I've read. You cannot grow a pumpkin, but you can improve the odds. Taylor's 'You Cannot Grow a Pumpkin' is a fantastic little prose poem of sorts. Watching I'm always trying to find a 'romp' when it comes to movies. Something lighthearted, pretty easy to watch, so on. We watched The Pink Panther this month and it is a perfect example of the genre. The inspiration for the watch came from the hamburger scene: But there's so much more of this kind of thing in the movie, little bits and physical comedy. Oh, and I also watched The Departed, which everyone says is good and is good. Elsewhere I wrote Accidental Anonymity on the micro blog, and it stirred up some discussion on Bluesky as well as at least one blog response. It was kind of an angry piece, as I said at the start. I will keep trying to stay out of the trap of writing about that topic all the time. Listening The only album I bought this month was Songs of Her's by Her's, which is fine. I wish I had something more profound to say about it given how the band met an unbelievably tragic end. Maybe more influential than that was Know Your Enemy's recent podcasts, especially this one about the pope's encyclical. I've really grown to love that podcast, and it has been part of me intellectually reconnecting with, but not readopting, Catholicism. Art Here's some art I really liked this month: This Hockney piece called 'Picture Emphasizing Stillness' from 1962 was at the MAC/CCB museum in Lisbon. Via Tim Babb, I enjoyed finding Tomás Sánchez's work.

1st Jul 2026 • 1 votes

More in programming

Bikepacking across Kyushu

Five days and 540km on a bike across Kyushu, without a laptop. Notes on the peace of riding all day, convenience store dinners, and Japan's emptying countryside.

yesterday • 1 votes
Modifications to add a booty to Loops by Kat's Ditto amigurumi

I found a wonderful free crochet pattern for the Pokémon Ditto from Loops by Kat, but I decided I wanted to make a version with more than 3 "leg" blobs like the original pattern had. Specifically, I wanted to add two more smaller blobs in the back to help stabilize Ditto when they're sitting and also add a butt to our favorite transforming blob. Hazel Knits Cadence, a worsted weight superwash merino, in Terrywinkle that I had in my stash (I used about a third of the skein/36 grams/66 yards/60 meters), and I crocheted with a 2.5 mm hook. I make very tightly stitched amigurumi - do whatever is a good fit for you and your yarn! I used two 6 mm round safety eyes, and I embroidered the mouth with scraps of Hazelknits Cadence in Coral, Bloom, and Signature Black. The above photo is more true to color than some of the ones I took where Ditto looks more pink. I made Ditto's 2 additional booty blobs intentionally off-center by embracing the natural lean of crochet stitches - this gives a more animated or "in motion" feel to Ditto. As an added bonus, this simplifies the pattern as everyone's tension will be a little different, and thus everyone's off-centering a little delightfully different, too, but centering it instead wouldn't be the same for everyone! Here's all the information to modify Kat's crochet pattern to create a 5-blobbed Ditto. I use US crochet terminology. This pattern modification is also available as a pdf. Follow Kat's pattern through round 13. At round 14, it's time to start modifying to add the space and shaping for the additional blobs. There are also 3 more rows in this section to better fit the new 5-blob proportions. Modified increases in body, beginning at round 14 (with additional rounds, too): Round 14: 3 sc, 1 inc, 46 sc, 1 inc, 3 sc (56) Round 15: 56 sc (56) Round 16: 2 sc, 1 inc, 2 sc, 1 inc, 44 sc, 1 inc, 2 sc, 1 inc, 2 sc (60) Round 17: 60 sc (60) Round 18: inc, 4 sc, inc, 48 sc, inc, 5 sc (63) Round 19: 63 sc (63) Round 20: dec (through front loop of first stitch and both loops of second stitch), inc, 9 sc, inc, 38 sc, inc, 11 sc (65) At this point, the original pattern suggests placing the safety eyes, but I think it makes more sense to do this after you've made the "butt" and divided the stitches the 3 main "front" "leg" blobs from the original pattern. You'll still have plenty of access to place them then. Roadmap for doing 5 "leg" blobs instead of 3 To make 5 blobs, you use some of the main body's stitches and some created stitches for each. Created stitches are a combination of chains, pickups on the back of chains, pickups in the connections between the chains and the main body, and pickups in the connections between the chains. The "butt" "leg"/mounds are created before the 3 original "legs," and the left "butt" "leg"/mound is made before the right one. 1. Left "butt" "leg"/mound: This is the left "butt" cheek when viewed from the bottom. (While this is really the right butt cheek from Ditto's perspective, I'm calling it left because we're crocheting while viewing from below so it's backwards.) The start of round is the same as the start of round from making the body of the blob, so you can continue as usual. Round 1: 13 sc, chain 11 (24) Round 2: connect chain at previous start of round (skipping 52 stitches) then 24 sc (24) Round 3: (6 sc, dec) x 3 (21) Round 4: (2 sc, dec, 3 sc) x 3 (18) Round 5: (sc, dec) x 6 (12) Round 6: 6 dec (6) Finish off by looping through front loops of all 6 stitches and pull tight, etc. 2. Right "butt" "leg"/mound: This is the right "butt" cheek when viewed from the bottom. The start of round for this "butt" "leg" is 12 stitches before the body/left "butt" leg start of round. This is the second stitch in an increase from the last round of the body. Round 1: 12 sc, 1 dec in the corner of body connected to first "butt" "leg" (pictured below), 4 sc in the bottom loops in the existing chain, chain 7 (24) Round 2: connect chain at start of round for this "butt" "leg" (skipping other blob's additional 7 chains and 40 stitches in the main body) then 24 sc (24) Round 3: (6 sc, dec) x 3 (21) Round 4: (2 sc, dec, 3 sc) x 3 (18) Round 5: (sc, dec) x 6 (12) Round 6: 6 dec (6) Finish off by looping through front loops of all 6 stitches and pull tight, etc. Getting back to the original pattern for the 3 main "legs": After both "butt" "legs"/mounds are done, there are 40 stitches on the original body, 7 chain stitches that can be picked up from each "butt" leg" that haven't been picked up in a second location, which totals the original 54 stitches - this sets you up for the 3 blobs as described in the original pattern. Between each "butt" "leg" and the main body and between the two "butt" "legs" themselves are an additional 3 connections that are also picked up and decreased appropriately to keep the seams between "legs" tight. As a reminder, here's the road map, which shows how to divide up these stitches for the Ditto's main three "legs:" You might find it helpful to visualize this division by temporarily stringing up some scrap yarn to preview the divisions: If you'd like, place stitch markers like I did to delineate the division: Now that you've visualized how you're dividing the main "leg" blobs, it's a good time to place safety eyes if you're using safety eyes for eyes. I placed mine between rows 7 and 8 counted down from the small head blob and left 8 stitches between the eyes. Now you can proceed to make the main legs in the same order as the original pattern. 3. Main "leg" blob 1: This is the left "leg" blob labeled 1 in the original pattern. To start, connect your yarn into the first stitch in the main body after where the main body meets the left "butt" mound. Round 1: 18 sc, chain 9, 1 sc in the 2nd bottom loop in the chain right of the body/left "butt" mound connection, dec through the leftmost bottom loop in the chain on the left "butt" mound and the loop on top of the meeting of the main body/left "butt" mound (pictured below). (29) In the start of the original pattern "leg" 1, here are the two loops in the decrease through the left most chain loop on the left "butt" mound and the loop on top of the meeting of the main body/left "butt" mound. Follow the original pattern's Rounds 19 to 23 and finish off blob "leg" 1 as written. 4. Main "leg" blob 2: This is the right "leg" blob labeled 2 in the original pattern. To start, connect your yarn into 15th stitch from where the main body meets the right "butt" mound - there should be 7 skipped stitches along the front of the Ditto between this start of round and the left "leg" blob's last stitch on the front side of Ditto before the chaining. Round 1: 15 sc, dec through the loop on top of the meeting of the main body/right "butt" mound and the rightmost bottom loop in the chain on the right "butt" mound (pictured below), 4 sc in the bottom loops in the chain on the right "butt" mound, chain 9 (29) In the start of the original pattern "leg" 2, here are the two loops in the decrease through the loop on top of the meeting of the main body/right "butt" mound and the rightmost chain loop on the right "butt" mound. Connect chain at start of round for this blob "leg" at the beginning of round 2's first sc and continue the original pattern's Rounds 2 to 6 for blob "leg" 2 as written. As in the original pattern, now is a good time to stuff your Ditto most of the way! 5. Main "leg" blob 3: This is the center "leg" blob labeled 3 in the original pattern. Round 1: Start in the corner next to left "leg" 1 on the front side (pictured below). 37 sc into the following stitches you pick up: 7 stitches along the main body 1 stitch in the corner of the main body and right "leg" 2 9 stitches in the bottom loops of the chain along right "leg" 2 1 stitch in the corner of right "leg" 2 and the right "butt" mound 2 stitches in the bottom loops of the chain along the right "butt" mound 1 stitch in the corner between the two "butt" mounds 5 stitches in the bottom loops of the chain along the left "butt" mound 1 stitch in the corner of the left "butt" mound and left "leg" 1 9 stitches in the bottom loops of the chain along left "leg" 1 1 stitch in the corner of left "leg" 1 and the main body (37) My lime green running stitch marker indicates the start of round pickup location for making the main blob "leg" 3. To compensate for the extra 5 stitches from those corners, I decreased in the second round at the corresponding locations instead of just single crocheting the whole way around to ensure the end of my round 2 of this section had the specified 32 stitches: Round 2: 6 sc, dec, 8 sc, dec, sc, dec, 4 sc, dec, 8 sc, dec (32) After round 2, I continued with the rest of the original pattern to finish the middle blob "leg" 3. Make the two arms according to the original pattern. I attached them less symmetrically than the original suggested. Finally, embroider a mouth for Ditto. You can either do this in black to match the safety eyes or create a two-toned mouth in red and pink to make a very happy looking Ditto like I did. FYI, this is also documented as a project on Ravelry (though it's a lot harder to follow since photos couldn't be inline).

2 days ago • 1 votes
Tyding up my side projects

Being focused is about doing less things, and giving more space to the stuff that matters. I am spread out on too many projects and I can’t give enough attention to all of them. It’s time to clearly sort out which one I will keep maintaining and which I should drop entirely. Chuttersnap Mikochi Mikochi is a self-hostable remote file manager I’ve started in 2023. It’s my most successful open source project. I personally use it every day, and thousands of people have adopted it and started using it on their own servers. This year the project has been receiving more and more attention. Maybe it just reached a critical mass of users. In practice, that means a bit more maintenance work, since people have been pointing out bugs and suggesting new features. At the same time, working on Mikochi is fairly enjoyable. It’s a small, self-contained project made with technologies I enjoy working with. I’ve got no complaints about spending some time working on it. Verdict: Keep maintaining Mikochi and actively continue improving it. Itako Itako is an investment portfolio tracking SaaS. I built it for the most part between 2023 and 2025. In terms of scope, it’s the largest project I’ve done entirely by myself. Is it a success? Not really. There are definitely a lot of people who tried Itako, and some who’ve kept using it a bit. But it’s not engaging enough for anyone to consider getting the premium plan. And honestly I don’t find myself using it that much. My view of investing and portfolio management has significantly shifted since I started this project. While I used to think that more sophisticated analysis would lead to better returns, I now realize that the only strategies that consistently make money are honestly stupidly simple. Or maybe it’s a U curve: on one end you’ve got a monkey throwing darts, on the other end you’ve got Jane Street, and everyone in-between fails to beat the market. Anyway, the biggest issue with Itako is how dull working on it is. The interesting parts of the projects are working on statistics and data visualization. But in practice, 90% of the time is spent tediously fixing data, understanding why some German stocks have an exchange labelled XETRA instead of XETR, why some Belgian stocks still have quotes while Euronext shows them as delisted… Verdict: Shut down Itako today. Milou Milou is static site generator for press kits. It started as a fork of presskit.html which was completely abandoned at the time. It’s a very useful tool. At Tsukumogami, it’s part of our Cloudflare pipeline which builds our website in a few minutes whenever we need to change something. It seems like a few other game studios have picked it up, although I rarely get any feedback about it. I’ve not spent too much time working on it in 2026. I think it could be interesting to come back to it and add a feature or two. Better support for multiple languages could be an idea. At least, I need to make sure we don’t fall into the good old Node.js dependency rot. Verdict: Spend some time on Milou. Luluka Earlier this year, I created Luluka. It’s a CLI that allows previewing the output of Ebitengine shaders. I do still think Ebitengine is a great engine and Go is better suited for game development than most people realize. However, after quite a long period of experimentation around it, we’ve decided to remain a Godot studio. On top of having quite a large sunk cost in infrastructure surrounding Godot, the tooling and possibility of doing 3D games still makes it a more attractive engine for our use cases. And I’ve been doing a lot of 3D work lately, so better put those hours to use. Verdict: Archive the project. The rest I’ve had a lot of good ideas that stayed as almost empty repositories in my GitHub. For example, Hakumei was a terminal companion to Mikochi. I made a few commits on this project and never found the time to work on it again. I have to admit I’m probably never going to have the time to work on all those repositories. Time to archive them all!

5 days ago • 1 votes
Not everybody is an AI expert - and that’s fine

This post was previously published through my newsletter on November 9, 2026. From time to time, I will republish newsletter issues on my blog here if I think people (and search engines) might benefit from it. If you want to read everything I’ve written once it is posted, I recommend signing up for the newsletter. If you’re doing anything to stay on top of what is happening in the world of software testing and test automation, like browsing or even posting on LinkedIn, which I stopped doing for the foreseeable future, or reading blog posts - my preferred way of keeping up these days, and I highly recommend Dawid Dylowicz’s excellent Software Testing Weekly aggregator mailing list if you prefer longer-form reading, too you’d be thinking that AI has consumed our entire field, and that everybody (or at least those who post or write in public) is an AI expert these days. The reality, though, is far from that. Yes, some people use a lot of AI, even when I would only call a small fraction of them ‘experts’. I definitely do not classify myself as an ‘AI expert’, by the way. A much larger group uses AI on a less frequent basis, and they’re getting some value out of it. Sometimes more, sometimes less. That’s the group I’m probably in. And then there’s a group of people who haven’t really been using a lot of AI at all so far, beyond maybe the odd prompt to ChatGPT or Claude. I don’t have the actual numbers, but I suspect that this group is a lot larger than you would think from browsing your feed or surfing the blogosphere. You just don’t see them, because they’re typically not the people who do a lot of work in public. A few weeks ago, I started working with a small group of testers to teach them how to use AI in their daily work. This work covers both test automation as well as broader software testing tasks, as some of them contribute to automation on a daily basis, but not all of them do. I’m working with them one day per week, on average, for three months, and we’re making small steps towards making AI a more prominent tool in their tool belt. So, what are we working on right now? I’m pulling ideas from my ‘Valuable Feedback, Fast with AI’ course, and so far, we’ve spent some time setting up Claude, going over some important concepts such as context windows, models, tokens, and (of course!) the probabilistic nature of LLMs, and what that means for the results they provide. We have gone through several initial conversations, using Claude to learn more about and review specific user stories, which was an excellent segue into using talking about MCPs and setting up a connection to both Jira and Confluence using the Atlassian MCP. Last week, we also started experimenting with writing straightforward skills to make it easier for Claude to repeat certain actions in a structured way. These actions ranged from reviewing stories and acceptance criteria to refactoring small chunks of code in their (Robot Framework-based) test automation suite. What I loved about this is the avalanche of ideas that popped up in their heads when they saw how easy it was to use Claude. We made a short to-do list of ideas to try out for the next couple of weeks, and I’m looking forward to seeing them getting more confident around using Claude. One thing I have noticed is that their level of comfort around using AI varies quite a bit. Some of them are naturally quite cautious, which means they’ll ask ‘can we really do this?’ and ‘should we really do this?’ frequently before even submitting a single prompt. This is a good habit, I think, but we’ll have to do some work to get them more comfortable with using LLMs, without losing too much of that caution. Others in the group are the opposite: I need to hold them back a little, because otherwise they’ll create a beautiful mess within days, simply because they see so many opportunities to use Claude in their work. That, too, isn’t inherently bad, but I do want to teach them not just how to get the most out of an LLM, but also (more so) how to use AI prudently. Over the next couple of months, we’ll dive deeper into writing better prompts, creating and structuring skills, better context management, and creating and using agents, and probably a few more things, too. I’m looking forward to seeing these people grow more comfortable around using AI in their daily work, and figuring out where AI genuinely adds value and where it doesn’t in their own context. Is there a deeper message in this newsletter? Maybe not, and I’m just happy to tell you about this project, and how it is a great example of a what I call ‘corporate mentoring’, a very efficient way of teaching a small group of engineers new skills, within their own context. But maybe it’s also to show you that, despite what you might see on the Internet, especially those places featuring a lot of self-congratulation (I’m looking at you, LinkedIn), not everybody out there is an AI expert. At least not yet. So, if you feel like you’re ‘behind’ simply because you’re not running at least 17 agents continuously, creating 5400 merge requests per day, know that you’re not alone. Quite far from it, I would say.

6 days ago • 1 votes
Keyhive 08 · Rain Diagrams

Certflow diagrams laid out in time

a week ago • 1 votes
📚 BoredReading

You seem to be enjoying this.

Join free to unlock everything.

Create free account

Already have an account? Sign in