Bringing dwm Shortcuts to GNOME 2023-11-02 The dwm window manager is my standard "go-to" for most of my personal laptop environments. For desktops with larger, higher resolution monitors I tend to lean towards using GNOME. The GNOME DE is fairly solid for my own purposes. This article isn't going to deep dive into GNOME itself, but instead highlight some minor configuration changes I make to mimic a few dwm shortcuts. For reference, I'm running GNOME 45.0 on Ubuntu 23.10 Setting Up Fixed Workspaces When I use dwm I tend to have a hard-set amount of tags to cycle through (normally 4-5). Unfortunately, dynamic rendering is the default for workspaces (ie. tags) in GNOME. For my personal preference I set this setting to fixed. We can achieve this by opening Settings > Multitasking and selecting "Fixed number of workspaces". Screenshot of GNOME's Multitasking Settings GUI Setting Our Keybindings Now all that is left is to mimic dwm keyboard shortcuts, in this case: ALT + $num for switching between workspaces and ALT + SHIFT + $num for moving windows across workspaces. These keyboard shortcuts can be altered under Settings > Keyboard > View and Customize Shortcuts > Navigation. You'll want to make edits to both the "Switch to workspace n" and "Move window to workspace n". Screenshot of GNOME's keyboard shortcut GUI: switch to workspace Screenshot of GNOME's keyboard shortcut GUI: move window to workspace That's it. You're free to include even more custom keyboard shortcuts (open web browser, lock screen, hibernate, etc.) but this is a solid starting point. Enjoy tweaking GNOME!

Installing Older Versions of MongoDB on Arch Linux 2023-09-11 I've recently been using Arch Linux for my main work environment on my ThinkPad X260. It's been great. As someone who is constantly drawn to minimalist operating systems such as Alpine or OpenBSD, it's nice to use something like Arch that boasts that same minimalist approach but with greater documentation/support. Another major reason for the switch was the need to run older versions of "services" locally. Most people would simply suggest using Docker or vmm, but I personally run projects in self-contained, personalized directories on my system itself. I am aware of the irony in that statement... but that's just my personal preference. So I thought I would share my process of setting up an older version of MongoDB (3.4 to be precise) on Arch Linux. AUR to the Rescue You will need to target the specific version of MongoDB using the very awesome AUR packages: yay -S mongodb34-bin Follow the instructions and you'll be good to go. Don't forget to create the /data/db directory and give it proper permissions: mkdir -p /data/db/ chmod -R 777 /date/db What About My "Tools"? If you plan to use MongoDB, then you most likely want to utilize the core database tools (restore, dump, etc). The problem is you can't use the default mongodb-tools package when trying to work with older versions of MongoDB itself. The package will complain about conflicts and ask you to override your existing version. This is not what we want. So, you'll have to build from source locally: git clone https://github.com/mongodb/mongo-tools cd mongodb-tools ./make build Then you'll need to copy the built executables into the proper directory in order to use them from the terminal: cp bin/* /usr/local/bin/ And that's it! Now you can run mongod directly or use systemctl to enable it by default. Hopefully this helps anyone else curious about running older (or even outdated!) versions of MongoDB.

Running VSCode in Chromium on OpenBSD 2023-06-05 VSCode and its many variations are not available on OpenBSD. This doesn't cause issue with many OpenBSD users, but those making the jump from Linux might miss access to such a popular editor. Lucky for us, there is a hacky workaround to solve this problem. VSCode in the Browser I tried my best to build something like code-server locally and run that directly in my browser - but I failed miserably. Instead, I fell back on vscode.dev which is essentially a remote version of code-server. Getting things to work seamlessly proved a little more challenging. I found the best performance was running everything through Chromium with special parameters enabled on launch. Note: The following assumes you have already installed chromium First we need to disable unveil for Chromium. This will allow us to access our system files through vscode.dev using the "Open folder..." or "Open file..." commands without issue: chrome --disable-unveil Everything should work pretty solid right out the box now - except it doesn't. Syntax highlighting does not work without enabling WASM/WebAssembly. Your experience might be different, but I had to include the following when launching Chromium from the terminal: ENABLE_WASM=1 chrome --enable-wasm Success! We can avoid typing out these complex commands everytime we want to launch our editor by setting up an alias (in my case via .zshrc): alias vscode="ENABLE_WASM=1 chrome --enable-wasm --disable-unveil" That's it! Now I can just pop open VSCode on OpenBSD by simply running vscode in my terminal. Hopefully this can help others slowly transition over to OpenBSD - which you should do because it is amazing!

Converting My X201 ThinkPad into a Slabtop 2023-05-01 I recently wrote about physically disabling the WiFi toggle switch on my X201 which was a fun "hack" to an annoying issue I was running into. Since then, the laptop has been running flawlessly. The only other minor issue I had was the poor display quality. The screen works perfectly fine but the X201's age prevents it from being the best possible display for day-to-day tasks. Both the resolution and viewing angles are quite poor. So, what were my options to remedy this problem? Swap out and upgrade the laptop's display (not many options for this though) Connect an external display, keyboard, mouse and dock the X201 Something else? Looking into "Something Else" I found that the possible replacement screens weren't worth the cost/hassle to swap out. And setting the laptop aside, docked with external peripherals sounded fine in theory - but then I would be missing out on the X201's amazing classic keyboard... Then I thought to myself, "Why not just remove the display entirely?" So that's what I did. The X201 display (still inside the top lid) disconnected from the body of the laptop. Removing the entire top lid was easier than I initially thought it would be. The beautiful thing about these older, classic ThinkPads is the ability to completely dissemble them. I won't go into heavy details on how to take one of these machines apart, since great documentation already exists. But once you have the keyboard and hinge screws removed it is essentially as easy as lifting the lid out of the chassis. (After disconnecting the small display connectors, of course) Ditching Alpine for Debian I love Alpine Linux. It's normally my go-to distro (paired with dwm) for most of my laptop devices. Unfortunately, I find tiling window managers a slight pain to use on larger, 4K displays. I also wanted this slabtop to "just work", instead of needing to fiddle around with WiFi, xrandr, audio etc. Not to mention that Debian is rock solid stable. Defaulting to the XFCE DE was a no-brainer as well since this device is somewhat old. The X201 "slabtop" connected to my 27" 4K monitor via the ThinkPad UltraDock. Closing Thoughts This slabtop gives me those old-school "Commodore64" vibes (or more recent devices like the Raspberry Pi 400). This setup certainly isn't for everyone but for my use case it's working well. Traveling with a machine like this might prove a little more challenging - although you could simply pair it with a smaller travel monitor (I'm sure the overall carrying weight would be similar to the standard X201). If nothing else, it is good to keep this option in mind if you ever break your laptop's display and don't feel like spending the money to fix it. Just grab an external monitor you have laying around and make a slabtop!