Full Width 
Shortcuts 
Sign Up 
Log In 
Articles 
Reading List More from Making software better without sacrificing user experience.
Bringing dwm Shortcuts to GNOME 2023-11-02 The dwm window manager is my standard "go-to" for most of my personal laptop environments. For desktops with larger, higher resolution monitors I tend to lean towards using GNOME. The GNOME DE is fairly solid for my own purposes. This article isn't going to deep dive into GNOME itself, but instead highlight some minor configuration changes I make to mimic a few dwm shortcuts. For reference, I'm running GNOME 45.0 on Ubuntu 23.10 Setting Up Fixed Workspaces When I use dwm I tend to have a hard-set amount of tags to cycle through (normally 4-5). Unfortunately, dynamic rendering is the default for workspaces (ie. tags) in GNOME. For my personal preference I set this setting to fixed. We can achieve this by opening Settings > Multitasking and selecting "Fixed number of workspaces". Screenshot of GNOME's Multitasking Settings GUI Setting Our Keybindings Now all that is left is to mimic dwm keyboard shortcuts, in this case: ALT + $num for switching between workspaces and ALT + SHIFT + $num for moving windows across workspaces. These keyboard shortcuts can be altered under Settings > Keyboard > View and Customize Shortcuts > Navigation. You'll want to make edits to both the "Switch to workspace n" and "Move window to workspace n". Screenshot of GNOME's keyboard shortcut GUI: switch to workspace Screenshot of GNOME's keyboard shortcut GUI: move window to workspace That's it. You're free to include even more custom keyboard shortcuts (open web browser, lock screen, hibernate, etc.) but this is a solid starting point. Enjoy tweaking GNOME!
Installing Older Versions of MongoDB on Arch Linux 2023-09-11 I've recently been using Arch Linux for my main work environment on my ThinkPad X260. It's been great. As someone who is constantly drawn to minimalist operating systems such as Alpine or OpenBSD, it's nice to use something like Arch that boasts that same minimalist approach but with greater documentation/support. Another major reason for the switch was the need to run older versions of "services" locally. Most people would simply suggest using Docker or vmm, but I personally run projects in self-contained, personalized directories on my system itself. I am aware of the irony in that statement... but that's just my personal preference. So I thought I would share my process of setting up an older version of MongoDB (3.4 to be precise) on Arch Linux. AUR to the Rescue You will need to target the specific version of MongoDB using the very awesome AUR packages: yay -S mongodb34-bin Follow the instructions and you'll be good to go. Don't forget to create the /data/db directory and give it proper permissions: mkdir -p /data/db/ chmod -R 777 /date/db What About My "Tools"? If you plan to use MongoDB, then you most likely want to utilize the core database tools (restore, dump, etc). The problem is you can't use the default mongodb-tools package when trying to work with older versions of MongoDB itself. The package will complain about conflicts and ask you to override your existing version. This is not what we want. So, you'll have to build from source locally: git clone https://github.com/mongodb/mongo-tools cd mongodb-tools ./make build Then you'll need to copy the built executables into the proper directory in order to use them from the terminal: cp bin/* /usr/local/bin/ And that's it! Now you can run mongod directly or use systemctl to enable it by default. Hopefully this helps anyone else curious about running older (or even outdated!) versions of MongoDB.
Converting HEIF Images with macOS Automator 2023-07-21 Often times when you save or export photos from iOS to iCloud they often render themselves into heif or heic formats. Both macOS and iOS have no problem working with these formats, but a lot of software programs will not even recognize these filetypes. The obvious step would just be to convert them via an application or online service, right? Not so fast! Wouldn't it be much cleaner if we could simply right-click our heif or heic files and convert them directly in Finder? Well, I've got some good news for you... Basic Requirements You will need to have Homebrew installed You will need to install the libheif package through Homebrew: brew install libheif Creating our custom Automator script For this example script we are going to convert the image to JPG format. You can freely change this to whatever format you wish (PNG, TIFF, etc.). We're just keeping things basic for this tutorial. Don't worry if you've never worked with Automator before because setting things up is incredibly simple. Open the macOS Automator from the Applications folder Select Quick Option from the first prompt Set "Workflow receives current" to image files Set the label "in" to Finder From the left pane, select "Library > Utilities" From the presented choices in the next pane, drag and drop Run Shell Script into the far right pane Set the area "Pass input" to as arguments Enter the following code below as your script and type ⌘-S to save (name it something like "Convert HEIC/HEIF to JPG") for f in "$@" do /opt/homebrew/bin/heif-convert "$f" "${f%.*}.jpg" done Making Edits If you ever have the need to edit this script (for example, changing the default format to png), you will need to navigate to your ~/Library/Services folder and open your custom heif Quick Action in the Automator application. Simple as that. Happy converting! If you're interested, I also have some other Automator scripts available: Batch Converting Images to webp with macOS Automator Convert Files to HTML with macOS Automator Quick Actions
Running VSCode in Chromium on OpenBSD 2023-06-05 VSCode and its many variations are not available on OpenBSD. This doesn't cause issue with many OpenBSD users, but those making the jump from Linux might miss access to such a popular editor. Lucky for us, there is a hacky workaround to solve this problem. VSCode in the Browser I tried my best to build something like code-server locally and run that directly in my browser - but I failed miserably. Instead, I fell back on vscode.dev which is essentially a remote version of code-server. Getting things to work seamlessly proved a little more challenging. I found the best performance was running everything through Chromium with special parameters enabled on launch. Note: The following assumes you have already installed chromium First we need to disable unveil for Chromium. This will allow us to access our system files through vscode.dev using the "Open folder..." or "Open file..." commands without issue: chrome --disable-unveil Everything should work pretty solid right out the box now - except it doesn't. Syntax highlighting does not work without enabling WASM/WebAssembly. Your experience might be different, but I had to include the following when launching Chromium from the terminal: ENABLE_WASM=1 chrome --enable-wasm Success! We can avoid typing out these complex commands everytime we want to launch our editor by setting up an alias (in my case via .zshrc): alias vscode="ENABLE_WASM=1 chrome --enable-wasm --disable-unveil" That's it! Now I can just pop open VSCode on OpenBSD by simply running vscode in my terminal. Hopefully this can help others slowly transition over to OpenBSD - which you should do because it is amazing!
Converting My X201 ThinkPad into a Slabtop 2023-05-01 I recently wrote about physically disabling the WiFi toggle switch on my X201 which was a fun "hack" to an annoying issue I was running into. Since then, the laptop has been running flawlessly. The only other minor issue I had was the poor display quality. The screen works perfectly fine but the X201's age prevents it from being the best possible display for day-to-day tasks. Both the resolution and viewing angles are quite poor. So, what were my options to remedy this problem? Swap out and upgrade the laptop's display (not many options for this though) Connect an external display, keyboard, mouse and dock the X201 Something else? Looking into "Something Else" I found that the possible replacement screens weren't worth the cost/hassle to swap out. And setting the laptop aside, docked with external peripherals sounded fine in theory - but then I would be missing out on the X201's amazing classic keyboard... Then I thought to myself, "Why not just remove the display entirely?" So that's what I did. The X201 display (still inside the top lid) disconnected from the body of the laptop. Removing the entire top lid was easier than I initially thought it would be. The beautiful thing about these older, classic ThinkPads is the ability to completely dissemble them. I won't go into heavy details on how to take one of these machines apart, since great documentation already exists. But once you have the keyboard and hinge screws removed it is essentially as easy as lifting the lid out of the chassis. (After disconnecting the small display connectors, of course) Ditching Alpine for Debian I love Alpine Linux. It's normally my go-to distro (paired with dwm) for most of my laptop devices. Unfortunately, I find tiling window managers a slight pain to use on larger, 4K displays. I also wanted this slabtop to "just work", instead of needing to fiddle around with WiFi, xrandr, audio etc. Not to mention that Debian is rock solid stable. Defaulting to the XFCE DE was a no-brainer as well since this device is somewhat old. The X201 "slabtop" connected to my 27" 4K monitor via the ThinkPad UltraDock. Closing Thoughts This slabtop gives me those old-school "Commodore64" vibes (or more recent devices like the Raspberry Pi 400). This setup certainly isn't for everyone but for my use case it's working well. Traveling with a machine like this might prove a little more challenging - although you could simply pair it with a smaller travel monitor (I'm sure the overall carrying weight would be similar to the standard X201). If nothing else, it is good to keep this option in mind if you ever break your laptop's display and don't feel like spending the money to fix it. Just grab an external monitor you have laying around and make a slabtop!
More in programming
After a write-up in the New York Times, Mommy Bloggers had two options. Either lean in, or step back. Given how popular it became after that, it's not hard to guess which option they chose. The post Mommy bloggers react appeared first on The History of the Web.
I'm quite a bit late on this one, but Haunt version 0.4.0 was released released back in July. I haven't had much time for blogging, but I'm catching up now! This release contains a small set of improvements and bug fixes since the 0.3.0 release in 2024. About Haunt Haunt is a static site generator that uses the Guile Scheme as its configuration language. It aims to be simple, functional, and extensible. Features include: Easy blog and Atom/RSS feed generation Markdown post support Simple development server for viewing edits before publishing Purely functional build process User extensibility Notable changes Added support for HTML in Markdown documents. This was a long time coming because guile-markdown did not support it and the library was abandoned by the original maintainer. As part of my work at Spritely, we forked it, implemented the relevant portions of the CommonMark specification, and released it. Spritely's guile-commonmark fork is now considered to be the official upstream by Guix and others. A further consequence of this is that guile-lib is now a required dependency for building Haunt as we need the (htmlprag) module to parse Markdown documents with embedded HTML. html->shtml from guile-lib's (htmlprag) module is now used instead of xml->sxml in the HTML reader. It was silly of me to use xml->sxml for this purpose years ago, but at the time I wanted guile-lib to be an optional dependency. Added haunt new subcommand for creating a new site. Added default directory, template, and prefix arguments to flat-pages procedure. Added support for index metadata flag to flat pages for pretty URLs. Flat pages now receive all page metadata, not just the page title. This is a breaking change from 0.3.0. Added .scm as an additional extension for sxml-reader. make-file-extension-matcher now supports multiple extensions. Fixed emission of <script> and <style> elements. Fixed handling of no available reader in flat pages builder. Fixed unreachable error handling clause when a reader is not found for a post. Fixed default blog theme template missing an <html> tag. Fixed overloaded -h option in haunt serve. Deprecated post in Skribe reader in favor of document. Download Haunt 0.4.0 is already available in Guix: guix pull guix install haunt See the Haunt project page for information on how to build from source. Thank you to Camilo Rodrigues, Noé Lopez, jgart, Jakob L. Kreuze, and Daniel Meißner for their contributions to this release! Happy haunting!
This is a transcript from a talk I gave at the German Perl Workshop earlier this year. If you'd prefer to watch the video recording, you can find it here. I have lots of photographic projects on the go. Lots of these being on film, as some of these I started shooting a long time ago. I don’t have any particular loyalty or attraction to film, it’s just that I started shooting many of these projects before affordable medium format digital was available. Since I mostly shoot medium/large format film I never really jumped to digital until recently, so film has continued to feature heavily in my workflow. That said, it’s a pain in the arse to shoot film now given the spiraling costs, limited availability, and issues around traveling with it: modern airport CT scanners, being rolled out across many airports, are much more convenient but will fog film. Asking for a hand inspection often comes down to arbitrary timing - how busy the security is, how experienced the operator is, or if you’re lucky/unlucky. I’ve had film forced to be scanned (and fogged) and politely argued with security on more than one occasion. I don’t want to deal with that so don’t travel with film anymore, thus I am shooting less of it and have mostly moved to digital. I still have a tonne of film I need to scan and process however. Here’s just some of the binders and files of film. I don’t plan to scan all of this, but I do plan to scan the ones I need to. Probably in the region of a couple of thousand frames. I want to scan to the highest possible quality (within reason) for archiving, book projects, and large prints. If you’re wondering how large I print, it can be up to 160x60cm panoramics for selling. This is restricted by the size of my printer (that’s another story). Three Years Ago Three years ago I almost bought a scanner. I ended up blogging about it and the post got a bit of traction on Hacker News (HN). I’m never quite sure which posts I submit will pique the interest of the users. I’ll spend months chipping away at a draft and when I post it it tanks. Or I’ll cobble something together in twenty minutes, like the linked one above, and it gets 440 points and over 300 comments… The thread had some useful suggestions and some not so useful ones, the not so useful ones being effectively “buy an Epson”: I’ve had one for fifteen years and it’s not good enough for large prints or archiving. It’s passable for web stuff and smaller prints, but for my recent use cases? Not even close. Ten years ago I had negatives scanned with a high resolution scanner for the first time and recently, wanting to scan my archives for various projects, I decided I should invest in one of those scanners. The Original Plan The plan, back in 2023, was simple: Buy scanner (at significantly reduced rate) Scan all my film Sell scanner Profit! And I mean profit - the scanner that I almost bought was being offered to me at about 2/3rd of the price they usually sell. And they’re becoming harder to find in working order so the prices are going up. Or profit in not having to pay > 25.- CHF per frame to have someone else do this. You can see the pricing from The Film Lab. You can read the original blog post to find out more about the scanner in question, so I won’t repeat it here. Other than the parts being relevant to the rest of this post, namely that the scanner was showing hard and soft problems. The software that drives the scanner was last updated in 2012, it’s proprietary and closed source, requiring 32bit architecture and no third party drivers or software exist. So you are stuck using old software/computers to run it. Or maybe you could use emulation / virtualisation? The problem there is that the interface is firewire, or SCSI on the even older models, and firewire is known to be problematic on these scanners as the controllers start to go bad after a decade of continued use. That’s a risk, and the scanner was very much EOL as the firewire controller was dying: both ports were bad that suggests controller, not ports. The scanner would have been €5,000 to purchase and then €3,000 (ish) to repair. Or, as HN suggested - just open it up and use a soldering iron. I’m not going to drop 5k on something and then start poking it with a soldering iron. I’ll pass on that thanks. Camera Scanning In the meantime I’ve been camera scanning, which you can read about in another blog post. But how does that compare cost wise? It’s expensive because you’ll need a high resolution camera, a macro lens, copy stand, negative carrier/holder, and quality light source. You’ll look to spend anything from three to five thousand Euros on everything. Camera scanning does actually work well, in that it’s close to a high resolution dedicated scanner. But you have to setup the entire thing every time you want to use it, including ensuring everything is straight and parallel. It also suffers from the same weakness as most other scanning methods. What do you think that is? Film Flatness Or lack thereof: Film is rarely flat, especially so with 35mm. These are pretty mild examples of curl. It tends to be flatter in the larger formats but then you get into flatness issues due to it sagging. The smallest difference in the film plane can cause major issues in sharpness due to focus fall off (film scanning is essentially macro photography). Any workflow or solution that does not take this into account is significantly compromised. And the workflow is only as good as its weakest part. This is the biggest problem in scanning film - all other considerations are more than adequate these days: resolution, dynamic range, etc. However, most negative carriers don’t keep the film perfectly flat. This has always been a problem - this is from a book called “Edge of Darkness” which is about traditional analog photography and printing, and summarises the problems of negative carriers thusly: “if you use a glassless negative carrier, you might as well just buy the cheapest enlarging lens you can find. You are simply throwing away the money and sharpness you paid for it in your enlarging lens, and also in your fine camera and the expensive lenses you bought for it… No film will lie flat in a glassless carrier. That’s right, none… There is no avoiding this issue. Use glass.” So you have to use (anti-newton ring) glass, which introduces other issues - you’ve now got extra glass in the transmission path, and dust (which isn’t a massive problem, but a pain nonetheless). You could use drum scanning, which is absurdly impractical from a cost and operating point of view. Or you could use a Flextight, the scanner I almost bought three years ago. Interim Solution I stuck with camera scanning, but wasn’t happy though, because of film flatness and the setup faff. So of course I started looking for another scanner. I was idly browsing near the end of 2025 and came across this one. It’s exactly the same spec as the one I tried three years ago, except SCSI not Firewire so less prone to failure. It just predates Hasselblad buying Imacon (so is pre the rebranding, etc). It was in Switzerland so I could inspect and pick it up. It was also significantly cheaper than the previous one I had looked at, so worth a punt even if I needed to take a soldering iron to it. We went to St Gallen for a weekend and I picked it up. Here’s the software interface back in my studio. Look at that marvelous interface! None of that liquid glass bollocks. The first scans were promising, but I had the sense things needed some TLC. The first thing was calibrating the focus, which the software can do in combination with a focus slide. I was lucky that the focus slide was included with the scanner and I’m not sure what I would have done otherwise. Probably paid a fortune for a replacement? Possibly a lot of manual trial and error with the software? After doing that I scanned images of the 1951 USAF resolution test chart (taken on ultra high resolution 35mm film): That’s what the resulting scan looked like. Notice that it’s sharp from edge to edge, corner to corner. At 100% crop we can resolve around 110 to 123 line pairs per mm, which equates to about 5,600 to 6,300 DPI. This is beyond the limit of most 35mm lenses, but importantly - exactly to spec for this scanner. So I was happy the focus was calibrated. If you’re curious this is the same target with the camera scanning setup. It’s close, but we’ve got another variable in the workflow, several even, and that impacts the results. It’s not as sharp, and the extra glass in the transmission path causes aberrations. Another thing that needed attention was the power supply. The seller mentioned that “sometimes it takes five minutes to warm up”. Sometimes it was more than five minutes, and the power supply would click click click away. So that needed fixing and it was easy enough to find a compatible new replacement, however it cost 200 Euros. Expensive! The third problem I noticed was that some of the scans were coming out stretched. Often about 10% too wide/long, sometimes more than that. My panoramics looked panoooooooramic. I did some research and someone suggested this might be a “buffering issue”, which I thought was nonsense. Doing some testing I heard slipping sounds when the scanner was pulling the film into the body. After more research I stumbled on a post that suggested the belts need replacing. I opened the scanner up, and sure enough: A ha! You can’t quite see that the one on the back is even worse. I replaced those with compatible belts: 535 synchroflex t 2.5/245. Problem solved. The fourth problem was that the film holders were old and/or had been mishandled. They were falling apart and held together with electrical tape or glue, which didn’t seem optimal. Replacements cost 350 Euros in total for the four I needed. They’re now available cheaper from China, since the patents have expired. Or, you know, China. They used to cost about 200 Euros each from Hasselblad. The fifth problem, which is a potential one and hasn’t manifested yet, is that the lamps may eventually need replacing. I picked up a couple for 25 Euros. That seemed like a reasonable thing to do while they’re still available. Success? Let’s add up the costs of acquiring this scanner and renovating it: Scanner: 1,750.- CHF Power Supply: 175.- CHF Belts: 25.- CHF Film Holders: 350.- CHF Lamps: 25.- CHF Total: 2,325.- CHF (c. 2,500 EUR) In the last year (since acquiring the scanner) I have scanned: c. 250 panoramics frames (~ 6,000 CHF) c. 2,500 medium format frames (~ 80,000 CHF) c. 200 large format frames (~ 9,000 CHF) The figures in parentheses are what it would have cost me to have that number of frames scanned by a third party. That is, er, quite a saving. Also quite a lucrative business model perhaps? I think I can argue the cost of the scanner was a very good investment, and I haven’t finished using it yet. Even if it were to stop working tomorrow, it has already paid for itself many times over. Could it stop working tomorrow? Yes, because of other issues that will be harder to solve. The Bigger Issue(s)? A Power Mac G4 (discontinued in 2004). This came with the scanner, the necessary hardware and software to drive it, and is almost certainly living on borrowed time. Spinning metal is never good in the long-term. I’ll maybe purchase a backup soon, as these can still be found for a couple of hundred Euros. The key thing though, is that this very expensive, very high quality scanner, will at some point be rendered useless by the upgrade treadmill because the software required to run it will be increasingly difficult to run. A scanner that is still used by businesses, educational institutions, and individuals like me. A scanner that originally cost tens of thousands of Euros less than a decade ago. The upgrade treadmill is constantly whirring away. This is from the top of the Seattle Space Needle. “Do not upgrade anything on computer”. Clearly that notice speaks of someone being bitten by an upgrade at some point. I wonder is anyone else feeling the fatigue? Security updates, sure I can understand. But feature creep and trivialities? No! What tangible benefits have the last ten, fifteen, or even twenty years of OS updates brought? Other than security, and compatibility with newer hardware? New hardware is great, really, but by association forced deprecation of older hardware. No! It feels like the upgrade treadmill gets faster and steeper every year. Add to that subscription lock-in and dead endpoints: “I couldn’t vacuum my house because an SSL cert had expired” is what someone told me earlier this year. Fortunately this person is a software engineer so ended up man-in-the-middling the network traffic to get the vacuum cleaner to work again (no SSL-pinning it seems). “GoPro is announcing the end of life of the GoPro Quik app for macOS, effective at the end of 2024”. They discontinued the former in favour of their mobile app, which requires an account, login, subscription, and so on. I just want to transfer the videos from the hardware, I don’t need any of this crap (I don’t need any of that crap, it turns out GoPro haven’t locked the device down enough to prevent using third party apps to access the files. Yet). And, of course, software has to be in everything. These days the scanner would/could have an embedded Raspberry PI? Just a keyboard and mouse input, monitor and USB output would reduce the surface area, connectivity issues, and software dependency. Or software is never done? Because: externalities. I guess software is “done” when it’s no longer supported? Marciano Planque has a good piece on this: When hardware products reach end-of-life (EOL), companies should be forced to open-source the software. I think that’s a fair thing to say. I suspect Hasselblad/Imacon never open-sourced the software due to licensing issues. Or they just lost the source. Or they just don’t care, I don’t know. Maybe some combination of the three. And, inevitably, discontinued hardware like this scanner. Or, that is to say, discontinued parts? What about regulation changes? The panoramics I shoot are with a camera that was discontinued in 2004 because EU regulation banned lead solder in circuit boards. The company decided redesigning the parts wasn’t worth it. Old hardware has new exciting ways to fail. As time goes on components will fail or loosen - components that were expected to last decades. Then that results in tribal knowledge, or worse link rot and QR code rot. A lot of this stuff is hidden in walled gardens. There’s a Facebook Imacon group, for example. Why in the ever-loving fuck is a group for technical people, by technical people, on Facebook? Then there’s misleading AI. “My flextight scans are coming out stretched, what might the problem be?” LLM’s have gobbled up all the right information, and all the wrong information. Or information that is massively out of date. Nowhere in the suggestions here does it mention the belts might need replacing, which, according to my own research, is the most common reason these days. Legacy Software A decade ago I wrote an essay that also hit the front page of HN: All Software is Legacy. I think it is still relevant today, some parts not so much given we are now in The Age of Prompt, but mostly it’s still true. Nicholas always said “legacy software is the ugly stuff that makes you money”, which I think is true. But now it’s the stuff that surrounds us, like when I want to withdraw cash (guess what software most cash machines are still running?). Or when I want to take a train - when I gave this talk in Germany I had to get from the airport to the city centre. The ticket machines were disabled with a sign saying “no longer in use, download the app”. Then register. Then buy the ticket. I just want to give you money. Or when I wanted to pay for parking while stopping off at some random town in the UK - the same situation as with the ticket machines. “Download the app, register, pay”. Fuck that, I went and parked somewhere else. I just want to park, I don’t want to fight with software. Or if I want to hire a bike (not pictured: the half dozen apps on my phone to hire a bike). And when I want to buy stuff from a shop… One of the self-checkouts crashed recently in the coop, rebooting into a version of SUSE Linux from well over a decade ago. We’re collectively creating more and more of this everyday, letting it out into the world where it becomes a future liability for someone or the death knell for something. A pile of bikes, an unplugged ticket machine, a top of the line but no longer driveable scanner. References Imacon Users Group (the non-Facebook group) The state of Hasselblad Flextight scanners (2019) 1951 USAF resolution test chart Vlads Test Target Printer Story Original Scanner Blog Responses to HN Camera Scanning All Software is Legacy Repair Cafe
The Tetris effect is one of psychology’s most easy to reproduce experiments. Simply spend a bit of time playing the eponymous game every day for a few weeks. After a little while, you’ll start recognizing familiar Tetromino shapes in clouds, buildings, and everyday objects. You might even see them appear before your eyes when you start falling asleep. Tom Tang Attention hijacking There’s one lesson the Tetris effect teaches us: whatever you focus on long enough will end up shaping your thoughts. This can be a good thing since it’s how we learn new skills and discover new ideas. Sadly, less and less of our attention is focused intentionally. Instead of picking what we want to see we let other people decide what is supposed to be good for us. Do you want to watch a video? YouTube knows you like cooking and art streams. But why not also recommend a few clips about the stock market bubble, global warming, and the war in Iran. Doomscrolling will make you stay longer and click on a few more ads. Do you want to listen to music? Just open a Spotify playlist and let the algorithm figure out what you like. Please ignore the AI slop they will insert in between real songs to avoid paying royalties to real artists. Do you want to know how your colleagues are doing? Too bad, LinkedIn will bury any relevant career news between the opinion of complete strangers. It is surely just a coincidence that those strangers happen to be shilling whatever Microsoft is invested in at the moment. Do you want the opinion of strangers on a product? Well those Redditors you wanted to ask are probably just a bunch of LLMs talking to a bunch of Russian trolls now. I hope you didn’t value their opinion too much. If, like me and most people, you spend the major part of your day focused on your device, there’s no doubt it’s affecting you. And when you let someone else dictate what appears on your screen, it’s the same as giving them the key to your brain. New York Said Back to an intentional internet The internet wasn’t always like that. Before recommendation algorithms where a thing, you had to decide what you would be doing on the computer. You didn’t really have one big app that you could open and order it to entertain you. Instead, you had a few dozen of bookmarks to websites, each with a specific idea in mind. A site for video game news, that one website with lots of tutorials, a blog about anime that didn’t update often enough, a wiki about a TV show from the 90s… Of course awful things existed on the web. We had Encyclopedia Dramatica and Rotten.com, but you actually had to put the effort to go there if you wanted. Nobody was going to put pictures of dead kids and far-right propaganda as a suggestion after a pancake recipe or a cat video. The good thing is that this intentional internet is still around. It has just been a bit buried below the corporate web, but it’s not very hard to find. After all you’re on this blog, so you probably already have a good idea about it. The main difference between this time and now is you. When you want to get back to reading blogs, RSS feeds, and finish that tutorial instead of doomscrolling shorts, you have to get used to a slower internet. One where content is not infinite and doesn’t get updated every click. But like every habit, the only thing you have to do is to keep at it. And if you pay enough attention to it, something will click in your brain.
