Full Width [alt+shift+f] Shortcuts [alt+shift+k]
Sign Up [alt+shift+s] Log In [alt+shift+l]
46

Stay Hungry

from Making software better without sacrificing user experience. [alt+shift+b] in programming

Stay Hungry 2018-02-12 It can feel daunting in this developer / designer landscape to keep yourself up-to-date with the latest and greatest technologies available. Which new framework should I invest the most time into? Will it even be maintained a couple years down the road? Is it just a fad? What about programming languages? Should I learn as many as possible or should I become an expert in one specialized area? Should designers code? The list of possible new things you could be learning continues to grow. This is sarcasm. Please don't take this seriously... Jumping right in Want my advice? Pick something and dive head first into it. Don't worry if it's not the most popular programming language or if it's a new design system that isn't gaining much traction. Do you find it interesting? Awesome - that's what matters most. How can you teach yourself something new when you have zero interest in it? Less talk, more action So what am I currently doing to keep my mind fresh and thinking outside of my comfort zone? Teaching myself the R programming language Deep diving into the ggplot2 package Developing my first side project website using blogdown and Hugo Trying out Figma as my exclusive design program for the next few months Programming your brain to learn something new can be frustrating and pull you out of your comfort zone. Don't let this become stressful - instead use it as inspiration to push yourself through the struggle. There is no real reason to avoid learning something new outside your current circle of knowledge - only crappy excuses. Get on it.
12th Feb 2018

Stay updated

Get a weekly newsletter with the top 5 articles worth reading every week.

More from Making software better without sacrificing user experience.

Bringing dwm Shortcuts to GNOME

Bringing dwm Shortcuts to GNOME 2023-11-02 The dwm window manager is my standard "go-to" for most of my personal laptop environments. For desktops with larger, higher resolution monitors I tend to lean towards using GNOME. The GNOME DE is fairly solid for my own purposes. This article isn't going to deep dive into GNOME itself, but instead highlight some minor configuration changes I make to mimic a few dwm shortcuts. For reference, I'm running GNOME 45.0 on Ubuntu 23.10 Setting Up Fixed Workspaces When I use dwm I tend to have a hard-set amount of tags to cycle through (normally 4-5). Unfortunately, dynamic rendering is the default for workspaces (ie. tags) in GNOME. For my personal preference I set this setting to fixed. We can achieve this by opening Settings > Multitasking and selecting "Fixed number of workspaces". Screenshot of GNOME's Multitasking Settings GUI Setting Our Keybindings Now all that is left is to mimic dwm keyboard shortcuts, in this case: ALT + $num for switching between workspaces and ALT + SHIFT + $num for moving windows across workspaces. These keyboard shortcuts can be altered under Settings > Keyboard > View and Customize Shortcuts > Navigation. You'll want to make edits to both the "Switch to workspace n" and "Move window to workspace n". Screenshot of GNOME's keyboard shortcut GUI: switch to workspace Screenshot of GNOME's keyboard shortcut GUI: move window to workspace That's it. You're free to include even more custom keyboard shortcuts (open web browser, lock screen, hibernate, etc.) but this is a solid starting point. Enjoy tweaking GNOME!

2nd Nov 2023 • 119 votes
Installing Older Versions of MongoDB on Arch Linux

Installing Older Versions of MongoDB on Arch Linux 2023-09-11 I've recently been using Arch Linux for my main work environment on my ThinkPad X260. It's been great. As someone who is constantly drawn to minimalist operating systems such as Alpine or OpenBSD, it's nice to use something like Arch that boasts that same minimalist approach but with greater documentation/support. Another major reason for the switch was the need to run older versions of "services" locally. Most people would simply suggest using Docker or vmm, but I personally run projects in self-contained, personalized directories on my system itself. I am aware of the irony in that statement... but that's just my personal preference. So I thought I would share my process of setting up an older version of MongoDB (3.4 to be precise) on Arch Linux. AUR to the Rescue You will need to target the specific version of MongoDB using the very awesome AUR packages: yay -S mongodb34-bin Follow the instructions and you'll be good to go. Don't forget to create the /data/db directory and give it proper permissions: mkdir -p /data/db/ chmod -R 777 /date/db What About My "Tools"? If you plan to use MongoDB, then you most likely want to utilize the core database tools (restore, dump, etc). The problem is you can't use the default mongodb-tools package when trying to work with older versions of MongoDB itself. The package will complain about conflicts and ask you to override your existing version. This is not what we want. So, you'll have to build from source locally: git clone https://github.com/mongodb/mongo-tools cd mongodb-tools ./make build Then you'll need to copy the built executables into the proper directory in order to use them from the terminal: cp bin/* /usr/local/bin/ And that's it! Now you can run mongod directly or use systemctl to enable it by default. Hopefully this helps anyone else curious about running older (or even outdated!) versions of MongoDB.

11th Sep 2023 • 81 votes
Converting HEIF Images with macOS Automator

Converting HEIF Images with macOS Automator 2023-07-21 Often times when you save or export photos from iOS to iCloud they often render themselves into heif or heic formats. Both macOS and iOS have no problem working with these formats, but a lot of software programs will not even recognize these filetypes. The obvious step would just be to convert them via an application or online service, right? Not so fast! Wouldn't it be much cleaner if we could simply right-click our heif or heic files and convert them directly in Finder? Well, I've got some good news for you... Basic Requirements You will need to have Homebrew installed You will need to install the libheif package through Homebrew: brew install libheif Creating our custom Automator script For this example script we are going to convert the image to JPG format. You can freely change this to whatever format you wish (PNG, TIFF, etc.). We're just keeping things basic for this tutorial. Don't worry if you've never worked with Automator before because setting things up is incredibly simple. Open the macOS Automator from the Applications folder Select Quick Option from the first prompt Set "Workflow receives current" to image files Set the label "in" to Finder From the left pane, select "Library > Utilities" From the presented choices in the next pane, drag and drop Run Shell Script into the far right pane Set the area "Pass input" to as arguments Enter the following code below as your script and type ⌘-S to save (name it something like "Convert HEIC/HEIF to JPG") for f in "$@" do /opt/homebrew/bin/heif-convert "$f" "${f%.*}.jpg" done Making Edits If you ever have the need to edit this script (for example, changing the default format to png), you will need to navigate to your ~/Library/Services folder and open your custom heif Quick Action in the Automator application. Simple as that. Happy converting! If you're interested, I also have some other Automator scripts available: Batch Converting Images to webp with macOS Automator Convert Files to HTML with macOS Automator Quick Actions

21st Jul 2023 • 56 votes
Running VSCode in Chromium on OpenBSD

Running VSCode in Chromium on OpenBSD 2023-06-05 VSCode and its many variations are not available on OpenBSD. This doesn't cause issue with many OpenBSD users, but those making the jump from Linux might miss access to such a popular editor. Lucky for us, there is a hacky workaround to solve this problem. VSCode in the Browser I tried my best to build something like code-server locally and run that directly in my browser - but I failed miserably. Instead, I fell back on vscode.dev which is essentially a remote version of code-server. Getting things to work seamlessly proved a little more challenging. I found the best performance was running everything through Chromium with special parameters enabled on launch. Note: The following assumes you have already installed chromium First we need to disable unveil for Chromium. This will allow us to access our system files through vscode.dev using the "Open folder..." or "Open file..." commands without issue: chrome --disable-unveil Everything should work pretty solid right out the box now - except it doesn't. Syntax highlighting does not work without enabling WASM/WebAssembly. Your experience might be different, but I had to include the following when launching Chromium from the terminal: ENABLE_WASM=1 chrome --enable-wasm Success! We can avoid typing out these complex commands everytime we want to launch our editor by setting up an alias (in my case via .zshrc): alias vscode="ENABLE_WASM=1 chrome --enable-wasm --disable-unveil" That's it! Now I can just pop open VSCode on OpenBSD by simply running vscode in my terminal. Hopefully this can help others slowly transition over to OpenBSD - which you should do because it is amazing!

5th Jun 2023 • 111 votes
Converting My X201 ThinkPad into a Slabtop

Converting My X201 ThinkPad into a Slabtop 2023-05-01 I recently wrote about physically disabling the WiFi toggle switch on my X201 which was a fun "hack" to an annoying issue I was running into. Since then, the laptop has been running flawlessly. The only other minor issue I had was the poor display quality. The screen works perfectly fine but the X201's age prevents it from being the best possible display for day-to-day tasks. Both the resolution and viewing angles are quite poor. So, what were my options to remedy this problem? Swap out and upgrade the laptop's display (not many options for this though) Connect an external display, keyboard, mouse and dock the X201 Something else? Looking into "Something Else" I found that the possible replacement screens weren't worth the cost/hassle to swap out. And setting the laptop aside, docked with external peripherals sounded fine in theory - but then I would be missing out on the X201's amazing classic keyboard... Then I thought to myself, "Why not just remove the display entirely?" So that's what I did. The X201 display (still inside the top lid) disconnected from the body of the laptop. Removing the entire top lid was easier than I initially thought it would be. The beautiful thing about these older, classic ThinkPads is the ability to completely dissemble them. I won't go into heavy details on how to take one of these machines apart, since great documentation already exists. But once you have the keyboard and hinge screws removed it is essentially as easy as lifting the lid out of the chassis. (After disconnecting the small display connectors, of course) Ditching Alpine for Debian I love Alpine Linux. It's normally my go-to distro (paired with dwm) for most of my laptop devices. Unfortunately, I find tiling window managers a slight pain to use on larger, 4K displays. I also wanted this slabtop to "just work", instead of needing to fiddle around with WiFi, xrandr, audio etc. Not to mention that Debian is rock solid stable. Defaulting to the XFCE DE was a no-brainer as well since this device is somewhat old. The X201 "slabtop" connected to my 27" 4K monitor via the ThinkPad UltraDock. Closing Thoughts This slabtop gives me those old-school "Commodore64" vibes (or more recent devices like the Raspberry Pi 400). This setup certainly isn't for everyone but for my use case it's working well. Traveling with a machine like this might prove a little more challenging - although you could simply pair it with a smaller travel monitor (I'm sure the overall carrying weight would be similar to the standard X201). If nothing else, it is good to keep this option in mind if you ever break your laptop's display and don't feel like spending the money to fix it. Just grab an external monitor you have laying around and make a slabtop!

1st May 2023 • 109 votes

More in programming

Bikepacking across Kyushu

Five days and 540km on a bike across Kyushu, without a laptop. Notes on the peace of riding all day, convenience store dinners, and Japan's emptying countryside.

7 hours ago • 1 votes
Modifications to add a booty to Loops by Kat's Ditto amigurumi

I found a wonderful free crochet pattern for the Pokémon Ditto from Loops by Kat, but I decided I wanted to make a version with more than 3 "leg" blobs like the original pattern had. Specifically, I wanted to add two more smaller blobs in the back to help stabilize Ditto when they're sitting and also add a butt to our favorite transforming blob. Hazel Knits Cadence, a worsted weight superwash merino, in Terrywinkle that I had in my stash (I used about a third of the skein/36 grams/66 yards/60 meters), and I crocheted with a 2.5 mm hook. I make very tightly stitched amigurumi - do whatever is a good fit for you and your yarn! I used two 6 mm round safety eyes, and I embroidered the mouth with scraps of Hazelknits Cadence in Coral, Bloom, and Signature Black. The above photo is more true to color than some of the ones I took where Ditto looks more pink. I made Ditto's 2 additional booty blobs intentionally off-center by embracing the natural lean of crochet stitches - this gives a more animated or "in motion" feel to Ditto. As an added bonus, this simplifies the pattern as everyone's tension will be a little different, and thus everyone's off-centering a little delightfully different, too, but centering it instead wouldn't be the same for everyone! Here's all the information to modify Kat's crochet pattern to create a 5-blobbed Ditto. I use US crochet terminology. This pattern modification is also available as a pdf. Follow Kat's pattern through round 13. At round 14, it's time to start modifying to add the space and shaping for the additional blobs. There are also 3 more rows in this section to better fit the new 5-blob proportions. Modified increases in body, beginning at round 14 (with additional rounds, too): Round 14: 3 sc, 1 inc, 46 sc, 1 inc, 3 sc (56) Round 15: 56 sc (56) Round 16: 2 sc, 1 inc, 2 sc, 1 inc, 44 sc, 1 inc, 2 sc, 1 inc, 2 sc (60) Round 17: 60 sc (60) Round 18: inc, 4 sc, inc, 48 sc, inc, 5 sc (63) Round 19: 63 sc (63) Round 20: dec (through front loop of first stitch and both loops of second stitch), inc, 9 sc, inc, 38 sc, inc, 11 sc (65) At this point, the original pattern suggests placing the safety eyes, but I think it makes more sense to do this after you've made the "butt" and divided the stitches the 3 main "front" "leg" blobs from the original pattern. You'll still have plenty of access to place them then. Roadmap for doing 5 "leg" blobs instead of 3 To make 5 blobs, you use some of the main body's stitches and some created stitches for each. Created stitches are a combination of chains, pickups on the back of chains, pickups in the connections between the chains and the main body, and pickups in the connections between the chains. The "butt" "leg"/mounds are created before the 3 original "legs," and the left "butt" "leg"/mound is made before the right one. 1. Left "butt" "leg"/mound: This is the left "butt" cheek when viewed from the bottom. (While this is really the right butt cheek from Ditto's perspective, I'm calling it left because we're crocheting while viewing from below so it's backwards.) The start of round is the same as the start of round from making the body of the blob, so you can continue as usual. Round 1: 13 sc, chain 11 (24) Round 2: connect chain at previous start of round (skipping 52 stitches) then 24 sc (24) Round 3: (6 sc, dec) x 3 (21) Round 4: (2 sc, dec, 3 sc) x 3 (18) Round 5: (sc, dec) x 6 (12) Round 6: 6 dec (6) Finish off by looping through front loops of all 6 stitches and pull tight, etc. 2. Right "butt" "leg"/mound: This is the right "butt" cheek when viewed from the bottom. The start of round for this "butt" "leg" is 12 stitches before the body/left "butt" leg start of round. This is the second stitch in an increase from the last round of the body. Round 1: 12 sc, 1 dec in the corner of body connected to first "butt" "leg" (pictured below), 4 sc in the bottom loops in the existing chain, chain 7 (24) Round 2: connect chain at start of round for this "butt" "leg" (skipping other blob's additional 7 chains and 40 stitches in the main body) then 24 sc (24) Round 3: (6 sc, dec) x 3 (21) Round 4: (2 sc, dec, 3 sc) x 3 (18) Round 5: (sc, dec) x 6 (12) Round 6: 6 dec (6) Finish off by looping through front loops of all 6 stitches and pull tight, etc. Getting back to the original pattern for the 3 main "legs": After both "butt" "legs"/mounds are done, there are 40 stitches on the original body, 7 chain stitches that can be picked up from each "butt" leg" that haven't been picked up in a second location, which totals the original 54 stitches - this sets you up for the 3 blobs as described in the original pattern. Between each "butt" "leg" and the main body and between the two "butt" "legs" themselves are an additional 3 connections that are also picked up and decreased appropriately to keep the seams between "legs" tight. As a reminder, here's the road map, which shows how to divide up these stitches for the Ditto's main three "legs:" You might find it helpful to visualize this division by temporarily stringing up some scrap yarn to preview the divisions: If you'd like, place stitch markers like I did to delineate the division: Now that you've visualized how you're dividing the main "leg" blobs, it's a good time to place safety eyes if you're using safety eyes for eyes. I placed mine between rows 7 and 8 counted down from the small head blob and left 8 stitches between the eyes. Now you can proceed to make the main legs in the same order as the original pattern. 3. Main "leg" blob 1: This is the left "leg" blob labeled 1 in the original pattern. To start, connect your yarn into the first stitch in the main body after where the main body meets the left "butt" mound. Round 1: 18 sc, chain 9, 1 sc in the 2nd bottom loop in the chain right of the body/left "butt" mound connection, dec through the leftmost bottom loop in the chain on the left "butt" mound and the loop on top of the meeting of the main body/left "butt" mound (pictured below). (29) In the start of the original pattern "leg" 1, here are the two loops in the decrease through the left most chain loop on the left "butt" mound and the loop on top of the meeting of the main body/left "butt" mound. Follow the original pattern's Rounds 19 to 23 and finish off blob "leg" 1 as written. 4. Main "leg" blob 2: This is the right "leg" blob labeled 2 in the original pattern. To start, connect your yarn into 15th stitch from where the main body meets the right "butt" mound - there should be 7 skipped stitches along the front of the Ditto between this start of round and the left "leg" blob's last stitch on the front side of Ditto before the chaining. Round 1: 15 sc, dec through the loop on top of the meeting of the main body/right "butt" mound and the rightmost bottom loop in the chain on the right "butt" mound (pictured below), 4 sc in the bottom loops in the chain on the right "butt" mound, chain 9 (29) In the start of the original pattern "leg" 2, here are the two loops in the decrease through the loop on top of the meeting of the main body/right "butt" mound and the rightmost chain loop on the right "butt" mound. Connect chain at start of round for this blob "leg" at the beginning of round 2's first sc and continue the original pattern's Rounds 2 to 6 for blob "leg" 2 as written. As in the original pattern, now is a good time to stuff your Ditto most of the way! 5. Main "leg" blob 3: This is the center "leg" blob labeled 3 in the original pattern. Round 1: Start in the corner next to left "leg" 1 on the front side (pictured below). 37 sc into the following stitches you pick up: 7 stitches along the main body 1 stitch in the corner of the main body and right "leg" 2 9 stitches in the bottom loops of the chain along right "leg" 2 1 stitch in the corner of right "leg" 2 and the right "butt" mound 2 stitches in the bottom loops of the chain along the right "butt" mound 1 stitch in the corner between the two "butt" mounds 5 stitches in the bottom loops of the chain along the left "butt" mound 1 stitch in the corner of the left "butt" mound and left "leg" 1 9 stitches in the bottom loops of the chain along left "leg" 1 1 stitch in the corner of left "leg" 1 and the main body (37) My lime green running stitch marker indicates the start of round pickup location for making the main blob "leg" 3. To compensate for the extra 5 stitches from those corners, I decreased in the second round at the corresponding locations instead of just single crocheting the whole way around to ensure the end of my round 2 of this section had the specified 32 stitches: Round 2: 6 sc, dec, 8 sc, dec, sc, dec, 4 sc, dec, 8 sc, dec (32) After round 2, I continued with the rest of the original pattern to finish the middle blob "leg" 3. Make the two arms according to the original pattern. I attached them less symmetrically than the original suggested. Finally, embroider a mouth for Ditto. You can either do this in black to match the safety eyes or create a two-toned mouth in red and pink to make a very happy looking Ditto like I did. FYI, this is also documented as a project on Ravelry (though it's a lot harder to follow since photos couldn't be inline).

14 hours ago • 1 votes
Tyding up my side projects

Being focused is about doing less things, and giving more space to the stuff that matters. I am spread out on too many projects and I can’t give enough attention to all of them. It’s time to clearly sort out which one I will keep maintaining and which I should drop entirely. Chuttersnap Mikochi Mikochi is a self-hostable remote file manager I’ve started in 2023. It’s my most successful open source project. I personally use it every day, and thousands of people have adopted it and started using it on their own servers. This year the project has been receiving more and more attention. Maybe it just reached a critical mass of users. In practice, that means a bit more maintenance work, since people have been pointing out bugs and suggesting new features. At the same time, working on Mikochi is fairly enjoyable. It’s a small, self-contained project made with technologies I enjoy working with. I’ve got no complaints about spending some time working on it. Verdict: Keep maintaining Mikochi and actively continue improving it. Itako Itako is an investment portfolio tracking SaaS. I built it for the most part between 2023 and 2025. In terms of scope, it’s the largest project I’ve done entirely by myself. Is it a success? Not really. There are definitely a lot of people who tried Itako, and some who’ve kept using it a bit. But it’s not engaging enough for anyone to consider getting the premium plan. And honestly I don’t find myself using it that much. My view of investing and portfolio management has significantly shifted since I started this project. While I used to think that more sophisticated analysis would lead to better returns, I now realize that the only strategies that consistently make money are honestly stupidly simple. Or maybe it’s a U curve: on one end you’ve got a monkey throwing darts, on the other end you’ve got Jane Street, and everyone in-between fails to beat the market. Anyway, the biggest issue with Itako is how dull working on it is. The interesting parts of the projects are working on statistics and data visualization. But in practice, 90% of the time is spent tediously fixing data, understanding why some German stocks have an exchange labelled XETRA instead of XETR, why some Belgian stocks still have quotes while Euronext shows them as delisted… Verdict: Shut down Itako today. Milou Milou is static site generator for press kits. It started as a fork of presskit.html which was completely abandoned at the time. It’s a very useful tool. At Tsukumogami, it’s part of our Cloudflare pipeline which builds our website in a few minutes whenever we need to change something. It seems like a few other game studios have picked it up, although I rarely get any feedback about it. I’ve not spent too much time working on it in 2026. I think it could be interesting to come back to it and add a feature or two. Better support for multiple languages could be an idea. At least, I need to make sure we don’t fall into the good old Node.js dependency rot. Verdict: Spend some time on Milou. Luluka Earlier this year, I created Luluka. It’s a CLI that allows previewing the output of Ebitengine shaders. I do still think Ebitengine is a great engine and Go is better suited for game development than most people realize. However, after quite a long period of experimentation around it, we’ve decided to remain a Godot studio. On top of having quite a large sunk cost in infrastructure surrounding Godot, the tooling and possibility of doing 3D games still makes it a more attractive engine for our use cases. And I’ve been doing a lot of 3D work lately, so better put those hours to use. Verdict: Archive the project. The rest I’ve had a lot of good ideas that stayed as almost empty repositories in my GitHub. For example, Hakumei was a terminal companion to Mikochi. I made a few commits on this project and never found the time to work on it again. I have to admit I’m probably never going to have the time to work on all those repositories. Time to archive them all!

4 days ago • 1 votes
The Pulse: Details of incident.io’s AI spend

The resiliency startup has slashed the amount it spends on AI; down from $4,500 per dev, per month, in August, to $1,600 now.

5 days ago • 1 votes
Not everybody is an AI expert - and that’s fine

This post was previously published through my newsletter on November 9, 2026. From time to time, I will republish newsletter issues on my blog here if I think people (and search engines) might benefit from it. If you want to read everything I’ve written once it is posted, I recommend signing up for the newsletter. If you’re doing anything to stay on top of what is happening in the world of software testing and test automation, like browsing or even posting on LinkedIn, which I stopped doing for the foreseeable future, or reading blog posts - my preferred way of keeping up these days, and I highly recommend Dawid Dylowicz’s excellent Software Testing Weekly aggregator mailing list if you prefer longer-form reading, too you’d be thinking that AI has consumed our entire field, and that everybody (or at least those who post or write in public) is an AI expert these days. The reality, though, is far from that. Yes, some people use a lot of AI, even when I would only call a small fraction of them ‘experts’. I definitely do not classify myself as an ‘AI expert’, by the way. A much larger group uses AI on a less frequent basis, and they’re getting some value out of it. Sometimes more, sometimes less. That’s the group I’m probably in. And then there’s a group of people who haven’t really been using a lot of AI at all so far, beyond maybe the odd prompt to ChatGPT or Claude. I don’t have the actual numbers, but I suspect that this group is a lot larger than you would think from browsing your feed or surfing the blogosphere. You just don’t see them, because they’re typically not the people who do a lot of work in public. A few weeks ago, I started working with a small group of testers to teach them how to use AI in their daily work. This work covers both test automation as well as broader software testing tasks, as some of them contribute to automation on a daily basis, but not all of them do. I’m working with them one day per week, on average, for three months, and we’re making small steps towards making AI a more prominent tool in their tool belt. So, what are we working on right now? I’m pulling ideas from my ‘Valuable Feedback, Fast with AI’ course, and so far, we’ve spent some time setting up Claude, going over some important concepts such as context windows, models, tokens, and (of course!) the probabilistic nature of LLMs, and what that means for the results they provide. We have gone through several initial conversations, using Claude to learn more about and review specific user stories, which was an excellent segue into using talking about MCPs and setting up a connection to both Jira and Confluence using the Atlassian MCP. Last week, we also started experimenting with writing straightforward skills to make it easier for Claude to repeat certain actions in a structured way. These actions ranged from reviewing stories and acceptance criteria to refactoring small chunks of code in their (Robot Framework-based) test automation suite. What I loved about this is the avalanche of ideas that popped up in their heads when they saw how easy it was to use Claude. We made a short to-do list of ideas to try out for the next couple of weeks, and I’m looking forward to seeing them getting more confident around using Claude. One thing I have noticed is that their level of comfort around using AI varies quite a bit. Some of them are naturally quite cautious, which means they’ll ask ‘can we really do this?’ and ‘should we really do this?’ frequently before even submitting a single prompt. This is a good habit, I think, but we’ll have to do some work to get them more comfortable with using LLMs, without losing too much of that caution. Others in the group are the opposite: I need to hold them back a little, because otherwise they’ll create a beautiful mess within days, simply because they see so many opportunities to use Claude in their work. That, too, isn’t inherently bad, but I do want to teach them not just how to get the most out of an LLM, but also (more so) how to use AI prudently. Over the next couple of months, we’ll dive deeper into writing better prompts, creating and structuring skills, better context management, and creating and using agents, and probably a few more things, too. I’m looking forward to seeing these people grow more comfortable around using AI in their daily work, and figuring out where AI genuinely adds value and where it doesn’t in their own context. Is there a deeper message in this newsletter? Maybe not, and I’m just happy to tell you about this project, and how it is a great example of a what I call ‘corporate mentoring’, a very efficient way of teaching a small group of engineers new skills, within their own context. But maybe it’s also to show you that, despite what you might see on the Internet, especially those places featuring a lot of self-congratulation (I’m looking at you, LinkedIn), not everybody out there is an AI expert. At least not yet. So, if you feel like you’re ‘behind’ simply because you’re not running at least 17 agents continuously, creating 5400 merge requests per day, know that you’re not alone. Quite far from it, I would say.

5 days ago • 1 votes
📚 BoredReading

You seem to be enjoying this.

Join free to unlock everything.

Create free account

Already have an account? Sign in